scholarly journals Numerical Simulation of a Dual-Chamber Oscillating Water Column Wave Energy Converter

2017 ◽  
Vol 9 (9) ◽  
pp. 1599 ◽  
Author(s):  
Dezhi Ning ◽  
Rongquan Wang ◽  
Chongwei Zhang
Keyword(s):  
Numerical Simulation ◽  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Dual Chamber ◽  
Energy Converter

An experimental and numerical analysis of an I-beam attenuator-type, oscillating water column wave energy converter

2015 ◽  
pp. 437-443
Author(s):  
Harry Bingham ◽  
Robert Read ◽  
Frederik Jakobsen ◽  
Morten Simonsen ◽  
Pablo Guillen ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter

scholarly journals Geometric Analysis through the Constructal Design of a Sea Wave Energy Converter with Several Coupled Hydropneumatic Chambers Considering the Oscillating Water Column Operating Principle

2021 ◽  
Vol 11 (18) ◽  
pp. 8630
Author(s):  
Yuri Theodoro Barbosa de Lima ◽  
Mateus das Neves Gomes ◽  
Liércio André Isoldi ◽  
Elizaldo Domingues dos Santos ◽  
Giulio Lorenzini ◽  
...  
Keyword(s):  
Water Column ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Wave Energy ◽  
Performance Indicator ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
Constructal Design

The work presents a numerical study of a wave energy converter (WEC) device based on the oscillating water column (OWC) operating principle with a variation of one to five coupled chambers. The main objective is to evaluate the influence of the geometry and the number of coupled chambers to maximize the available hydropneumatic power converted in the energy extraction process. The results were analyzed using the data obtained for hydropneumatic power, pressure, mass flow rate, and the calculated performance indicator’s hydropneumatic power. The Constructal Design method associated with the Exhaustive Search optimization method was used to maximize the performance indicator and determine the optimized geometric configurations. The degrees of freedom analyzed were the ratios between the height and length of the hydropneumatic chambers. A wave tank represents the computational domain. The OWC device is positioned inside it, subject to the regular incident waves. Conservation equations of mass and momentum and one equation for the transport of the water volume fraction are solved with the finite volume method (FVM). The multiphase model volume of fluid (VOF) is used to tackle the water–air mixture. The analysis of the results took place by evaluating the performance indicator in each chamber separately and determining the accumulated power, which represents the sum of all the powers calculated in all chambers. The turbine was ignored, i.e., only the duct without it was analyzed. It was found that, among the cases examined, the device with five coupled chambers converts more energy than others and that there is an inflection point in the performance indicator, hydropneumatic power, as the value of the degree of freedom increases, characterizing a decrease in the value of the performance indicator. With the results of the hydropneumatic power, pressure, and mass flow rate, it was possible to determine a range of geometry values that maximizes the energy conversion, taking into account the cases of one to five coupled chambers and the individual influence of each one.

NUMERICAL ANALYSIS OF A SAVONIUS TURBINE INSERTED IN OSCILLATING WATER COLUMN WAVE ENERGY CONVERTER

2021 ◽  
Author(s):  
Andrei Santos ◽  
Filipe Branco Teixeira ◽  
Liércio Isoldi ◽  
jeferson Avila Souza ◽  
Mateus das Neves Gomes ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter

Uncertainty in Wave Basin Testing of a Fixed Oscillating Water Column Wave Energy Converter

2021 ◽  
Author(s):  
Frances M. Judge ◽  
Eoin Lyden ◽  
Michael O'Shea ◽  
Brian Flannery ◽  
Jimmy Murphy
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Width Ratio ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
The Monte Carlo Method ◽  
Wave Basin ◽  
Measurement Location ◽  
The Impact

Abstract This research presents a methodology for carrying out uncertainty analysis on measurements made during wave basin testing of an oscillating water column wave energy converter. Values are determined for Type A and Type B uncertainty for each parameter of interest, and uncertainty is propagated using the Monte Carlo method to obtain an overall Expanded Uncertainty with a 95% confidence level associated with the Capture Width Ratio of the device. An analysis into the impact of reflections on the experimental results reveals the importance of identifying the incident and combined wave field at each measurement location used to determine device performance, in order to avoid misleading results.

scholarly journals Oscillating Water Column Wave Energy Converter by Means of Straight-bladed Darrieus Turbine

2015 ◽  
Vol 82 ◽  
pp. 766-773 ◽  
Author(s):  
Sebastian Brusca ◽  
Filippo Cucinotta ◽  
Antonio Galvagno ◽  
Rosario Lanzafame ◽  
Stefano Mauro ◽  
...  
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter

scholarly journals Experimental Study of a Moored Floating Oscillating Water Column Wave-Energy Converter and of a Moored Cubic Box

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1834 ◽  
Author(s):  
Minghao Wu ◽  
Vasiliki Stratigaki ◽  
Peter Troch ◽  
Corrado Altomare ◽  
Tim Verbrugghe ◽  
...  
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Water Surface ◽  
Wave Energy Converter ◽  
Surface Elevation ◽  
Mooring Line ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
Large Wave ◽  
Water Surface Elevation

This paper describes experimental research on a floating moored Oscillating Water Column (OWC)-type Wave-Energy Converter (WEC) carried out in the wave flume of the Coastal Engineering Research Group of Ghent University. This research has been introduced to cover the existing data scarcity and knowledge gaps regarding response of moored floating OWC WECs. The obtained data will be available in the future for the validation of nonlinear numerical models. The experiment focuses on the assessment of the nonlinear motion and mooring-line response of a 1:25 floating moored OWC WEC model to regular waves. The OWC WEC model motion has 6 degrees of freedom and is limited by a symmetrical 4-point mooring system. The model is composed of a chamber with an orifice on top of it to simulate the power-take-off (PTO) system and the associated damping of the motion of the OWC WEC model. In the first place, the motion response in waves of the moored floating OWC WEC model is investigated and the water surface elevation in the OWC WEC chamber is measured. Secondly, two different mooring-line materials (iron chains and nylon ropes) are tested and the corresponding OWC WEC model motions and mooring-line tensions are measured. The performance of these two materials is similar in small-amplitude waves but different in large wave-amplitude conditions. Thirdly, the influence of different PTO conditions is investigated by varying the diameter of the top orifice of the OWC WEC model. The results show that the PTO damping does not affect the OWC WEC motion but has an impact on the water surface elevation inside the OWC chamber. In addition, an unbalanced mooring configuration is discussed. Finally, the obtained data for a moored cubic model in waves are presented, which is a benchmarking case for future validation purposes.

Sign in / Sign up

Export Citation Format

Share Document