scholarly journals Evaluation of Process and Economic Feasibility of Implementing a Topping Cycle Cogeneration System

2020 ◽  
Author(s):  
Unique Karki
Keyword(s):  
Economic Feasibility ◽  
Cogeneration System ◽  
Topping Cycle

Parametric Study on Economic Feasibility of Microturbine Cogeneration Systems by an Optimization Approach

2005 ◽  
Vol 127 (2) ◽  
pp. 389-396 ◽  
Author(s):  
Satoshi Gamou ◽  
Ryohei Yokoyama ◽  
Koichi Ito
Keyword(s):  
Energy Demand ◽  
Unit Cost ◽  
Maximum Energy ◽  
Optimal Number ◽  
Economic Feasibility ◽  
Optimization Approach ◽  
Energy Demands ◽  
Equation Problem ◽  
Numerical Studies ◽  
Cogeneration System

Economic feasibility of microturbine cogeneration systems is investigated by analyzing relationships between the optimal number of microturbine units and the maximum energy demands under various conditions. For this purpose, a method to obtain the maximum energy demand at which the optimal number changes is proposed by combining a nonlinear equation problem and an optimal unit sizing problem hierarchically. Based on the proposed method, a map expressing the aforementioned relationships can be illustrated. Through numerical studies carried out on systems installed in hotels by changing the electrical generating efficiency and the capital unit cost of the microturbine cogeneration unit as parameters, the influence of the parameters on the economic feasibility of the microturbine cogeneration system is clarified.

EFFECT OF OPERATING VARIABLES ON THE PERFORMANCE OF A COMBINED CYCLE COGENERATION SYSTEM WITH MULTIPLE PROCESS HEATERS

2009 ◽  
Vol 33 (1) ◽  
pp. 65-74
Author(s):  
B Law ◽  
B. V. Reddy
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Operating Variables ◽  
Cogeneration System ◽  
Multiple Process ◽  
Process Heat ◽  
Topping Cycle

Combined cycle power plants with a gas turbine topping cycle and a steam turbine bottoming cycle are widely used due to their high efficiencies. Combined cycle cogeneration has the possibility to produce power and process heat more efficiently, leading to higher performance and reduced green house gas emissions. The objective of the present work is to analyze and simulate a natural gas fired combined cycle cogeneration unit with multiple process heaters and to investigate the effect of operating variables on the performance. The operating conditions investigated include, gas turbine pressure ratio, process heat loads and process steam extraction pressure. The gas turbine pressure ratio significantly influences the performance of the combined cycle cogeneration system. It is also identified that extracting process steam at lower pressures improves the power generation and cogeneration efficiencies. The process heat load influences combined cycle efficiency and combined cycle cogeneration efficiency in opposite ways. It is also observed that using multiple process heaters with different process steam pressures, rather than a single process heater, improves the combined cycle cogeneration plant efficiency.

Feasibility Analysis of a Hybrid Photovoltaic/Thermal Cogeneration System for Domestic Applications

2016 ◽  
Author(s):  
Eduardo Ruiz-Casanova ◽  
Carlos Rubio-Maya ◽  
Ana Laura Soto-Sánchez ◽  
Crisanto Mendoza-Covarrubias ◽  
Jesús Martínez-Patiño
Keyword(s):  
Economic Analysis ◽  
Hybrid System ◽  
Net Present Value ◽  
Electrical Energy ◽  
Cash Flows ◽  
Economic Feasibility ◽  
Total Efficiency ◽  
Domestic Water ◽  
Cogeneration System ◽  
T System

A PV/T hybrid system is able to simultaneously produce electricity and heat from solar radiation. The feasibility of implementing PV/T systems depends primarily on climatic and economic characteristics of locations where are planned to be placed. Particularly in Mexico, there are only a few studies in the scientific literature which report the feasibility of using such innovative systems. Therefore, in this work the development of a techno-economic study is presented aiming to predict the performance and feasibility of implementation of this type of hybrid systems. Firstly, a PV/T system was designed to partially cover the needs of electricity and hot sanitary water in the domestic sector (considering a house of four inhabitants). Then, PV/T hybrid system operation was simulated using TRNSYS software over a full year using data from a typical meteorological year (TMY) of Morelia city (Michoacan State). Finally, an economic analysis was conducted, estimating the inherent cash flows and computing some economic indicators to determine the feasibility of implementation of PV/T system adapted to Mexican economic conditions. The simulation results show that the proposed system consisting of 1.55 m2 of collection area, will annually produce 1480.95 kWh and 393.57 kWh of thermal and electrical energy, respectively. The system is able to meet up to 51.2% of thermal energy and 29.2% of the electricity needed. The system reaches a total efficiency of 57.48%. The results of economic analysis indicate that in optimistic case, the proposed system has a simple payback period of 6.62 years, a net present value of $2129.0 Mexican pesos, and an internal rate of return of 14%, showing economic feasibility. The results show the great potential of the use of the hybrid PV/T systems for domestic water heating and electric production at particular locations in Mexico.

scholarly journals ECONOMIC FEASIBILITY STUDY FOR THE INSTALLATION OF A COGENERATION SYSTEM IN A TIMBER INDUSTRY OF LAGES-SC

2019 ◽  
Vol 7 (4) ◽  
pp. 59-71
Author(s):  
Scharles Roberto Vargas ◽  
Graciela Alessandra Dela Rocca ◽  
Nathielle Waldrigues Branco ◽  
José Adelir Wolf ◽  
Fernanda Cristina Silva Ferreira
Keyword(s):  
Net Present Value ◽  
Economic Feasibility ◽  
Economic Viability ◽  
Internal Rate Of Return ◽  
Present Value ◽  
Plateau Region ◽  
Viability Study ◽  
Cogeneration System ◽  
Descriptive Method

This research thematic is the Economic Viability Study, in order to implement a cogeneration system, in a logging company, located in the Santa Catarina highland plateau region. Thus, reducing its production cost, since much of it is due electricity purchase. Data collection of both production, consumption and expenses with electricity purchase and billing were carried out together with the company. Descriptive method was used, with case study. For the economic analysis, both net present value (NPV), internal rate of return (IRR) and payback period were used. With this information and crossing the data, the economic viability for this project became evident, as it can be visualized throughout of this article.

Water and Power Consumption, Ethanol Production and CO2 Emissions: High-Scale Sugarcane-Based Biorefinery Toward Neutrality in Carbon

2019 ◽  
Vol 965 ◽  
pp. 87-95
Author(s):  
Raquel de Freitas Dias ◽  
Hudson Bolsoni Carminati ◽  
Ofélia de Queiroz Fernandes Araújo ◽  
José Luiz de Medeiros
Keyword(s):  
Economic Analysis ◽  
Power Consumption ◽  
Ethanol Production ◽  
Capital Investment ◽  
Net Present Value ◽  
Economic Feasibility ◽  
Process Data ◽  
High Scale ◽  
Cogeneration System ◽  
Fixed Capital Investment

The present work assesses water and power consumption, ethanol production and CO2 emissions in order to evaluate the technical and economic feasibility of a high-scale sugarcane-based biorefinery and propose a scenario of full carbon and capture system, so the complex could become a sustainable carbon withdrawer from the atmosphere. This work is performed with the aid of professional software for a rigorous mass and energy balances simulation to achieve process data for plant technical and economic analysis. The combustion of sugarcane bagasse is the only source of energy of the plant, which provides steam for the distillery and generates electricity through cogeneration system. The ethanol production from sugars fermentation produces CO2 which, jointly with the CO2 from combustion, is released directly into the atmosphere contributing to global warming. Results demonstrate that for processing capacity of 1,000 t/h of sugarcane, the plant emits 0.7 tCO2 per ton of sugarcane, with net water consumption of 3,600 m3/h as make-up water to replace blowdown and evaporation losses in the cooling tower. The cogeneration system generates 320MW of net power for exportation as electricity. The economic analysis reveals a fixed capital investment of 910MMUSD and a net present value of 378MMUSD considering as revenues the ethanol produced and the electricity from cogeneration at an annual discount rate of 10%.

Parametric Study on Economic Feasibility of Microturbine Cogeneration Systems by an Optimization Approach

2003 ◽  
Author(s):  
Satoshi Gamou ◽  
Koichi Ito ◽  
Ryohei Yokoyama
Keyword(s):  
Energy Demand ◽  
Unit Cost ◽  
Maximum Energy ◽  
Optimal Number ◽  
Economic Feasibility ◽  
Optimization Approach ◽  
Energy Demands ◽  
Equation Problem ◽  
Non Linear Equation ◽  
Cogeneration System

Economic feasibility of microturbine cogeneration systems is investigated by analyzing relationships between the optimal number of microturbine units and the maximum energy demands under various conditions. For this purpose, a method to obtain the maximum energy demand at which the optimal number changes is proposed by combining a non-linear equation problem and an optimal unit sizing problem hierarchically. Based on the proposed method, a map expressing the aforementioned relationships can be illustrated. Through numerical studies carried out on systems installed in hotels by changing the electrical generating efficiency and the capital unit cost of the microturbine cogeneration unit as parameters, the influence of the parameters on the economic feasibility of the microturbine cogeneration system is clarified.

Sign in / Sign up

Export Citation Format

Share Document