scholarly journals INFLUENCE OF THE GENETIC FEATURES OF SOILS ON THE PROPERTIES OF SOIL-CONCRETES ON THEIR BASIS

2020 ◽  
pp. 69-75
Author(s):  
T. Dmitrieva ◽  
V. Strokova ◽  
A. Bezrodnykh
Keyword(s):  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Road Construction ◽  
Reinforced Soil ◽  
Soil Reinforcement ◽  
Production Costs ◽  
Forming Process ◽  
Main Hypothesis ◽  
Stabilized Soil ◽  
Clay Rocks

in order to form strong soil-concrete structures in parallel with the introduction of binder, an additive with a multicomponent composition that is activating the structure-forming process should be applied. Such additive is usually called stabilizer of soil, its introduction allows achieving a positive effect for soils with a high proportion of finely dispersed fraction in its composition. The article considers the main aspects of use in road construction of complex soil reinforcement by introducing a stabilizer and binding component. This technology will solve the problems of deficiency of high-quality traditional raw materials, lead to better physical and mechanical properties, increase labor productivity and reduce production costs. As a result of the carried out studies, principles for improving the quality characteristics of reinforced soil were developed, taking into account the mineral composition of clay raw materials. As the main hypothesis of the study an increase in the hydrophobicity of stabilized soil by blocking the hydrophilic centers of clay rocks should be marked. This circumstance helps to reduce the consumption of cement in the reinforced soil without reducing the operational and physical-mechanical characteristics. The dependence of the degree of effectiveness of the introduced stabilizing additive on the structural and chemical characteristics of clay rocks has been established, which decreases from montmorillonite and X-ray amorphous phases to kaolinite. Mixed layered formations, illite and chlorite act as intermediate minerals. Aluminosilicates act as the filler in this system that do not come into contact with the molecules of the stabilizer. To assess the degree of efficiency of interaction of the components of a soil-concrete mixture as an integral indicator it is necessary to use the cationic capacity of the soil.

scholarly journals EFFICIENCY OF REINFORCEMENT OF TECHNOLOGICAL SOIL BY MINERAL MODIFIERS

2019 ◽  
Vol 4 (7) ◽  
pp. 14-23
Author(s):  
Т. Дмитриева ◽  
T. Dmitrieva ◽  
Н. Куцына ◽  
N. Kucyna ◽  
А. Безродных ◽  
...  
Keyword(s):  
Raw Materials ◽  
Road Construction ◽  
Soil Reinforcement ◽  
Production Costs ◽  
Concrete Mixture ◽  
The Road ◽  
Physicomechanical Characteristics ◽  
Advantages And Disadvantages ◽  
Complex Binder ◽  
Technogenic Raw Materials

The paper discusses the main aspects of soil reinforcement in road construction by adding a binder component to them. The use of this technology allows to solve the problem of high-quality raw materials shortage while improving the physicomechanical characteristics or keeping them at the same level, as well as to increase labor productivity and reduce production costs. The technogenic raw materials for the production of soil concrete were studied, the main physicomechanical characteristics and requirements that must be taken into account when selecting the composition of the soil concrete mixture were analyzed. The paper compares the physicomechanical characteristics of the road composite, reveals the advantages and disadvantages of introducing binder components of various types: cement, cement with modifier and a complex binder. It has been established that the introduction of a complex binder or cement with modifier contributes to the improvement of the physicomechanical characteristics while reducing the consumption of cement in the composition of the soil-concrete mixture compared to traditional soil-concrete with cement.

FEATURES OF TECHNOLOGY FOR PRODUCING CONSTRUCTIONAL HEAT INSULATING CELLULAR CONCRETE BASED ON NONCONVENTIONAL RAW MATERIALS

2016 ◽  
Vol 2 (1) ◽  
pp. 138-143 ◽  
Author(s):  
Строкова ◽  
Valeriya Strokova ◽  
Володченко ◽  
Anatoliy Volodchenko
Keyword(s):  
Mechanical Properties ◽  
High Activity ◽  
Energy Production ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Production Costs ◽  
Raw Material ◽  
Porous Concrete ◽  
Clay Rocks ◽  
Cellular Concrete

It was found that the clay rocks unfinished stage mineral suitable as a raw material for thermal insulation materials construction-autoclaved. High activity of raw rock-forming minerals accelerate the synthesis of tumors and the formation of a rational connection cementitious microstructure that provides high physical and mechanical properties of porous concrete. At the same time by reducing the pressure and time of autoclaving and simplify technology possible reduction of energy production costs by 35%.

scholarly journals Potential possibilities of 3D printing for producing composite materials based on natural bioand synthetic polymers (a review)

2021 ◽  
Vol 25 ◽  
pp. 111-118
Author(s):  
D.G. Cheremisin ◽  
◽  
V.R. Mkrtchan ◽  
A.N. Ivankin ◽  
A.V. Ustyugov ◽  
...  
Keyword(s):  
Composite Materials ◽  
3D Printing ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Synthetic Polymers ◽  
Production Costs ◽  
Specific Product ◽  
Wood Processing ◽  
Materials Used ◽  
Natural And Synthetic

A review is presented on the modern method of 3D printing of various composites based on synthetic and natural biopolymers with the inclusion of wood raw materials. Some features of scientific and technological approaches to the formation of a specific product using abstract computer modeling are described. A classification and review of the most common and promising 3D printing technologies using degraded raw materials with the inclusion of wood processing products is given. It is shown that using 3D printing, it is very promising to obtain «artificial wood», which is a mixture of a wood base with an inert polymer binder, which can be either based on synthetic polymers or based on natural biomatrix obtained from ecologically safe constituents of herbal raw materials. It is indicated that an important aspect of the problem of obtaining modern biocomposites is the dispersion of the materials used, which affects the entire complex of physical and mechanical properties of the product. The areas of application of the materials used are given. Trends in the development of 3D printing technology with the use of polymer binders based on natural and synthetic polymers are analyzed and the prospects of using natural biopolymers based on plant raw materials for the production of goods and materials necessary for humans as environmentally friendly products are shown. It is concluded that an impending explosive growth in the production and use of 3D composite materials based on natural and synthetic polymers with the inclusion of cheap wood components in the context of a significant reduction in production costs and the rapid production of the required products with low cost of products in the implementation of a highly efficient method 3D printing.

scholarly journals THE EFFECT OF LONG-TERM STORAGE OF ELECTRIC STEEL SMELTING SLAGS IN DUMPS ON THEIR PROPERTIES

2020 ◽  
pp. 32-39
Author(s):  
Aleksey Pogromskiy ◽  
Tat'yana Anikanova
Keyword(s):  
Raw Materials ◽  
Steel Slag ◽  
Physical And Mechanical Properties ◽  
Road Construction ◽  
Mineral Resources ◽  
Mineralogical Composition ◽  
Electric Steel ◽  
Steel Smelting ◽  
Current Output ◽  
Main Component

construction, repair and reconstruction of roads require high costs of mineral raw materials in the form of sand, gravel, mineral powder. However, its reserves on the territory of our country are distributed unevenly, which causes significant transportation costs for the delivery of mineral resources to construction sites. In addition, mineral resources are inevitably reduced over time, which requires extensive involvement in the construction of roads of non-traditional types of raw materials, as well as industrial waste. The paper presents the results of studies of the properties of electric steel slag, the current output and stored in the dumps for several years. The main component of electric steel-smelting slags, both fresh and dumped, lying in dumps for about 20 years, is shannonite or γ-modification of calcium orthosilicate C2S. It has been established that the mineralogical composition of the Oskol Electrometallurgical Combine's slag is represented by hematite, wuistite, calcite, periclase, and also portlandite, formed during quenching of lime. Analysis of diffractograms of slags of different shelf life shows that in the initial periods of slag storage in the dumps there is a final quenching of lime and its carbonization with the formation of calcite. The results of the determination of the granulometric composition of the slag of different storage periods showed a decrease with time of the number of fine fractions and an increase in large fractions. It is established that when using electric steel-smelting slags in the construction and repair of highways, it is necessary to take into account changes in the physical and mechanical properties of materials. The processes that take place during the maintenance of slags in dumps determine the suitability of the use of slag mineral materials in road construction.

scholarly journals Baryshok. Enriching colour range of ceramic shapes on clay-based materials of low quality

2021 ◽  
Vol 18 (3) ◽  
pp. 318-329
Author(s):  
L. N. Tatski ◽  
L. V. Ilina ◽  
L. A. Baryshok
Keyword(s):  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Raw Material ◽  
Standard Methods ◽  
Ceramic Shard ◽  
Colour Palette ◽  
Modern Methods ◽  
Dry Pressing ◽  
Wall Materials ◽  
Clay Rocks

Introduction. This article discusses the possibility of expanding the colour palette of a ceramic shard. Due to the shortage of high-quality clay raw materials for the manufacture of plastic molded facing bricks, the problem of manufacturing ceramic wall materials by semi-dry pressing from low-quality clay rocks is urgent.Materials and methods. The main raw material was non-caking clay raw material with a low content of clay and a high content of silt particles. Some corrective additives were used to expand the colour palette of ceramic bricks. In the article, the authors used both standard methods for determining the physical and mechanical properties and modern methods for studying the phase composition of materials.Results. The possibility of enriching the colour range of a ceramic shard based on non-sintered clay raw materials has been experimentally confirmed, provided that the mixture contains flux additives. When receiving products with a clarified shard, light-colored flutes should be used.Conclusion. The possibility of enriching the colour range of a ceramic cap by adding white-burning clay, introducing bleaching and chromophore additives and technogenic products has been established. Due to the differences in the chemical composition of clay raw materials from individual deposits, an individual approach to each of them is required.

scholarly journals Determination of the Chemical, Physical and Mechanical Characteristics of Electric Arc Furnace Slags and Environmental Evaluation of the Process for Their Utilization as an Aggregate in Bituminous Mixtures

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 782 ◽  
Author(s):  
Juan María Terrones-Saeta ◽  
Jorge Suárez-Macías ◽  
Evaristo Rafael Moreno-López ◽  
Francisco Antonio Corpas-Iglesias
Keyword(s):  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Road Construction ◽  
Electric Arc Furnace ◽  
Electric Arc ◽  
Arc Furnace ◽  
Environmental Evaluation ◽  
Bituminous Mixtures ◽  
Electric Arc Furnace Slag

Road construction is an activity that demands a significant amount of aggregates for bituminous mixtures. In addition, these aggregates must be of a suitable quality for use, even more so on high traffic roads. In response to this problem, and in order to avoid the extraction of new raw materials, research is being carried out using industrial waste as a substitute for conventional aggregates. In this way, the extraction of raw materials is reduced and landfilling of waste is avoided. However, these wastes must have certain properties and environmental advantages over natural aggregates. Otherwise, the use of waste would not be environmentally beneficial but would be more damaging to the environment. For this reason, this research evaluates the viability of using electric arc furnace slag as aggregates for bituminous mixtures, the main objectives being the determination of the characteristics of the by-product, the particularities and the critical points to be taken into account for its subsequent use in mixtures. At the same time, the environmental advantages of treating this waste to obtain a usable aggregate are evaluated in comparison with the processing of a natural aggregate. The results showed that electric arc furnace slags have a suitable chemical composition and excellent physical and mechanical properties for use in bituminous mixtures, even on high traffic roads. At the same time, it was determined that their use produces a considerable reduction in environmental afflictions. Therefore, it could be affirmed that the use of electric arc furnace slags in bituminous mixtures is recommendable as a way to develop more sustainable materials for construction.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

Experimental Research on the Qualitative Characteristics of Iron Ores and Ferrous Waste That Can Be Used in Blast Furnace Mixt Injection Technology

2019 ◽  
Vol 70 (11) ◽  
pp. 3835-3842
Author(s):  
Mihai Dumitru Tudor ◽  
Mircea Hritac ◽  
Nicolae Constantin ◽  
Mihai Butu ◽  
Valeriu Rucai ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Experimental Research ◽  
Raw Materials ◽  
Coal Dust ◽  
Production Costs ◽  
Iron Ores ◽  
Fine Grained ◽  
Experimental Laboratory ◽  
Injection Technology ◽  
Direct Use

Direct use of iron ores in blast furnaces, without prior sintering leads to a reduction in production costs and energy consumption [1,2]. Fine-grained iron ores and iron oxides from ferrous wastes can be used together with coal dust and limestone in mixed injection technology through the furnace tuyeres. In this paper are presented the results of experimental laboratory investigations for establishing the physic-chemical characteristics of fine materials (iron ore, limestone, pulverized coal) susceptible to be used for mixed injection in blast furnace. [1,4]. The results of the experimental research have shown that all the raw materials analyzed can be used for mixt injection in blast furnace.

New surface treatment techniques to minimize copper alloy leaching in drinking water

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Norikazu Sugaya
Keyword(s):  
Surface Treatment ◽  
Raw Materials ◽  
Organic Film ◽  
Forming Process ◽  
Mixed Acid ◽  
Treatment Techniques ◽  
Acid Washing ◽  
Washing Process ◽  
Film Forming ◽  
Materials Used

This new surface treatment is simple and easy as well as low in cost. The processes can even be performed by hand. Pharmaceutical raw materials used for the surface treatment, such as hydrochloric acid and nitric acid used in a mixed acid washing process and vegetable oil used in an organic film forming process, are easily obtained in many countries.

The Economics of Commodities and Commodity Markets

2018 ◽  
Author(s):  
Florian Ielpo
Keyword(s):  
Raw Materials ◽  
Commodity Prices ◽  
Essential Element ◽  
Commodity Markets ◽  
Production Costs ◽  
Demand And Supply ◽  
Spot Prices ◽  
Supply Shocks ◽  
The Business Cycle

This chapter covers the economic fundamentals of commodity markets (i.e., what shapes the evolution of the price of raw materials) in three steps. First, it covers the theories explaining why the futures curve can be upward or downward sloping, an essential element for commodity producing companies. The evolution of inventories and hedging pressures are the two dominant sources of explanation. Second, the chapter reviews the fundamentals of commodity spot prices: technologies, supply, demand, and speculation. Production costs draw the long-term evolution of prices, but demand and supply shocks can trigger substantial variations in commodity prices. Third, the chapter presents how commodity prices interact with the business cycle. Commodities are influenced by the world activity but can also have a material impact on it.

Sign in / Sign up

Export Citation Format

Share Document