scholarly journals Effect of Er:YAG Laser and Reduced Time of Acid Etching on Bond Strength of Self-adhesive Resin Cement to MTA and Biodentine

2021 ◽  
Vol 12 (1) ◽  
pp. e36-e36
Author(s):  
Paria Dehghanian ◽  
Fereshteh Shafiei ◽  
Nasrin Kianimanesh
Keyword(s):  
Bond Strength ◽  
Adhesive Bonding ◽  
Er:Yag Laser ◽  
Resin Cement ◽  
Acid Etching ◽  
Control Group ◽  
Laser Etching ◽  
Adhesive Resin ◽  
Surface Pretreatment ◽  
Adhesive Resin Cement

Introduction: Considering the recent trend to use mineral trioxide aggregate (MTA) and Biodentine and resin cements, more conservative approaches concurrent with adequate bond strength have always been requested. The present study aimed to evaluate the effect of pretreatment with Er:YAG laser etching versus acid-etching for 5 and 15 seconds on the micro shear bond strength of self-adhesive resin cement (SRC) to MTA and Biodentine. Materials and Methods: Forty-eight samples of each cement (MTA and Biodentine) were prepared and distributed into four groups based on surface pretreatment: 1) control, no treatment; 2) Er:YAG laser etching with energy of 60 mJ; 3) 5-second acid-etching; 4) 15-second acid-etching. All specimens were cemented using SRC. Microshear bond strengths were tested following 24-hour water storage. Debonded specimens were examined and surface topography was assessed using an atomic force machine (AFM). Data analysis was performed using the two-way ANOVA and Tukey multiple comparisons test. Results: The three testing groups of laser etch and 5-s and 15-s acid-etch demonstrated a significantly higher SBS than the control group (P<0.05) with negligible differences among them (P > 0.05). Furthermore, Biodentine showed better adhesive bonding than MTA in all groups. Conclusion: Laser etching of 60 mJ and 5-s acid-etching were as beneficial as 15-s acid-etching in terms of bond strength of SRC to MTA and Bodentine.

scholarly journals Influence of Non-Thermal Atmospheric Pressure Plasma Treatment on Shear Bond Strength between Y-TZP and Self-Adhesive Resin Cement

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3321 ◽  
Author(s):  
Dae-Sung Kim ◽  
Jong-Ju Ahn ◽  
Eun-Bin Bae ◽  
Gyoo-Cheon Kim ◽  
Chang-Mo Jeong ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Atmospheric Pressure ◽  
Shear Bond Strength ◽  
Atmospheric Pressure Plasma ◽  
Resin Cement ◽  
Control Group ◽  
Adhesive Resin ◽  
Pressure Plasma ◽  
Adhesive Resin Cement

The purpose of this study was to evaluate the effect of non-thermal atmospheric pressure plasma (NTP) on shear bond strength (SBS) between yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and self-adhesive resin cement. For this study, surface energy (SE) was calculated with cube-shaped Y-TZP specimens, and SBS was measured on disc-shaped Y-TZP specimens bonded with G-CEM LinkAce or RelyX U200 resin cylinder. The Y-TZP specimens were classified into four groups according to the surface treatment as follows: Control (no surface treatment), NTP, Sb (Sandblasting), and Sb + NTP. The results showed that the SE was significantly higher in the NTP group than in the Control group (p < 0.05). For the SBS test, in non-thermocycling, the NTP group of both self-adhesive resin cements showed significantly higher SBS than the Control group (p < 0.05). However, regardless of the cement type in thermocycling, there was no significant increase in the SBS between the Control and NTP groups. Comparing the two cements, regardless of thermocycling, the NTP group of G-CEM LinkAce showed significantly higher SBS than that of RelyX U200 (p < 0.05). Our study suggests that NTP increases the SE. Furthermore, NTP increases the initial SBS, which is higher when using G-CEM LinkAce than when using RelyX U200.

Effect of Different Adhesive Systems Used for Immediate Dentin Sealing on Bond Strength of a Self-Adhesive Resin Cement to Dentin

2018 ◽  
Vol 43 (4) ◽  
pp. 391-397 ◽  
Author(s):  
RC Ferreira-Filho ◽  
C Ely ◽  
RC Amaral ◽  
JA Rodrigues ◽  
J-F Roulet ◽  
...  
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Water Storage ◽  
Resin Cement ◽  
Control Group ◽  
Adhesive Systems ◽  
Adhesive Resin ◽  
Etch And Rinse ◽  
Adhesive Resin Cement ◽  
Self Etch

SUMMARY Objective: The purpose of this study was to investigate the immediate and three-month water storage behavior of adhesives when used for immediate dentin sealing (IDS). Methods and Materials: Four adhesive systems were used to perform IDS: a one-step self-etch (Xeno V), a two-step self-etch (Clearfil SE Bond), a two-step etch-and-rinse (XP Bond), and a three-step etch-and-rinse (Optibond FL). For the control group, IDS was not performed. The self-adhesive resin cement RelyX Unicem was used for the luting procedures. After seven days of water storage, specimens (n=6) were sectioned into beams (n=5) with an approximately 1-mm2 cross-sectional area. Half of the specimens were tested in tension after seven days of water storage at 37°C, while the other half was stored for three months prior to testing in tension using a universal testing machine (1 mm/min). The failure pattern was determined using a stereomicroscope and scanning electron microscopy. Microtensile bond strength (μTBS) data were statistically analyzed by two-way analysis of variance and Tukey post hoc test (α=0.05). Results: After seven days, the control group presented the lowest μTBS but did not differ from XP Bond and Clearfil SE Bond. After three months, there was no μTBS difference between the IDS groups and the control. Conclusions: After seven days of water storage, the groups with IDS presented higher μTBS values than the control group, although XP Bond and Clearfil SE Bond did not present significant differences. However, after three months of storage in water, IDS groups did not differ significantly from control group, which did not receive IDS.

The Effect of Aging and Surface treatments on Micro-shear Bond Strength of Resin Nano-Ceramic Material Using Two Resin Cements

2020 ◽  
Author(s):  
Ayman Mohammed Said
Keyword(s):  
Bond Strength ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Resin Cement ◽  
Acid Etching ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Mean Values ◽  
Adhesive Resin Cement

Purpose: To evaluate the effect of aging and different surface treatments on micro-shear bond strength of two resin cements to resin nano-ceramic composite blocks using an in-vitro study. Materials and methods: Blocks of resin nano-ceramic (Lava Ultimate, 3M, St Paul, Minnesota, USA) were used to prepare eight plates having the following dimensions: (14mm × 12mm × 2mm). After plates preparation they were assigned to two main groups according to the surface treatment applied, either hydrofluoric acid etching and silane or sandblasting and silane. Scanning electron microscope (SEM) was used to analyze the surface topography of the Lava-Ultimate plates before and after application of surface treatments. Two resin cements were used; dual cured adhesive resin cement (Bifix QM, VOCO, Cuxhafen, Germany) and dual cured self-adhesive resin cement (Bifix SE, VOCO, Cuxhafen, Germany) to create a five resin micro-cylinders received on each lava ultimate plate. Ten specimens from each subgroup were tested after 24 hours and the other ten specimens were tested after aging in saline for 6 months. Micro-shear bond strength test was applied until failure. . Multi-factorial ANOVA test and One-way ANOVA followed by pair-wise Tukey’s post-hoc tests were used to analyze the data. Results: Both resin cements showed statistically significant decrease on bond strength after aging. Before aging, both surface treatments with adhesive resin cement showed statistically significant higher micro-shear bond strength mean values than with self-adhesive resin cement. After aging sandblasting showed a statistically significant higher micro-shear bond strength mean values with adhesive resin cement, while hydrofluoric acid etching revealed a statistically non-significant higher values with adhesive resin cement than self-adhesive resin cement. Conclusion: For both surface treatments and resin cements aging had a detrimental effect on micro- shear bond strength.

scholarly journals Shear Bond Strength of MDP-Containing Self-Adhesive Resin Cement and Y-TZP Ceramics: Effect of Phosphate Monomer-Containing Primers

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Jin-Soo Ahn ◽  
Young-Ah Yi ◽  
Yoon Lee ◽  
Deog-Gyu Seo
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Tetragonal Zirconia ◽  
Resin Cement ◽  
Control Group ◽  
Air Abrasion ◽  
Adhesive Resin ◽  
Multiple Comparison Test ◽  
Ceramic Surfaces ◽  
Adhesive Resin Cement

Purpose. This study was conducted to evaluate the effects of different phosphate monomer-containing primers on the shear bond strength between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramics and MDP-containing self-adhesive resin cement.Materials and Methods. Y-TZP ceramic surfaces were ground flat with #600-grit SiC paper and divided into six groups (n=10). They were treated as follows: untreated (control), Metal/Zirconia Primer, Z-PRIME Plus, air abrasion, Metal/Zirconia Primer with air abrasion, and Z-PRIME Plus with air abrasion. MDP-containing self-adhesive resin cement was applied to the surface-treated Y-TZP specimens. After thermocycling, a shear bond strength test was performed. The surfaces of the Y-TZP specimens were analyzed under a scanning electron microscope. The bond strength values were statistically analyzed using one-way analysis of variance and the Student–Newman–Keuls multiple comparison test (P<0.05).Results. The Z-PRIME Plus treatment combined with air abrasion produced the highest bond strength, followed by Z-PRIME Plus application, Metal/Zirconia Primer combined with air abrasion, air abrasion alone, and, lastly, Metal/Zirconia Primer application. The control group yielded the lowest results (P<0.05).Conclusion. The application of MDP-containing primer resulted in increased bond strength between Y-TZP ceramics and MDP-containing self-adhesive resin cements.

scholarly journals Effect of Anatomical Customization of the Fiber Post on the Bond Strength of a Self-Adhesive Resin Cement

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Adricyla Teixeira Rocha ◽  
Leticia Machado Gonçalves ◽  
Ana Júlia de Carvalho Vasconcelos ◽  
Etevaldo Matos Maia Filho ◽  
Ceci Nunes Carvalho ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Cement ◽  
Control Group ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement ◽  
Push Out

Aim. The aim of the study was to evaluate, by means of the push-out test, the effect of the anatomical customization of the fiber post on the bond strength of a self-adhesive resin cement. Methods. Twelve endodontically treated, human, upper central incisors were randomly divided into two groups (n=6): control (glass fiber posts cemented with Relyx® U200) and customized (glass fiber posts anatomically customized with translucent composite resin cemented with Relyx U200). The roots were sectioned into three slices, cervical, middle, and apical, and photographed with a digital camera attached to a stereomicroscopic loupe. The images were analyzed by software, for evaluation of the cement line. The slices were subsequently submitted to the push-out test until the post had completely extruded, and the fracture mode was analyzed with a stereomicroscopic loupe. Results. The results showed significant differences between the groups in the different root thirds in relation to the area occupied by air bubbles (p<0.05). Bond strength, when all the thirds are considered, was 8.77 ± 4.89 MPa for the control group and 16.96 ± 4.85 MPa for the customized group. Conclusion. The customized group showed greater bond resistance than the control group and a more uniform cement layer.

scholarly journals Push-Out Bond Strength Evaluation of Fiber-Reinforced Composite Resin Post Cemented with Self-Adhesive Resin Cement Using Different Adhesive Bonding Systems

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3639
Author(s):  
Yoon Lee ◽  
Junghyun Kim ◽  
Yooseok Shin
Keyword(s):  
Bond Strength ◽  
Adhesive Bonding ◽  
Resin Cement ◽  
Fiber Reinforced ◽  
Universal Adhesive ◽  
Universal Primer ◽  
Adhesive Resin ◽  
Adhesive Resin Cement ◽  
Push Out ◽  
One Way Anova

The purpose of this in vitro study was to evaluate the push-out bond strength of fiber-reinforced resin posts using self-adhesive cements with different adhesive systems. A total of 50 single-rooted human maxillary premolars with fully developed apices and 15–16 mm straight root canals were selected. The teeth were divided into 10 groups with coronal and apical parts according to the adhesive bonding system and luting material used: one universal adhesive with MDP-containing self-adhesive resin cement; another universal adhesive with MDP-containing self-adhesive resin cement; universal primer with MDP-containing self-adhesive resin cement; universal primer with dual-cure resin cement; MDP-containing self-adhesive resin cement only (Control). Each specimen was subjected to a fatigue load of 600,000 cycles using a chewing simulator with sliding movement and cut horizontally for push-out bond strength testing. Statistical evaluation consisted of a one-way ANOVA test using SPSS v23.0. The highest bond strength (7.05 MPa) was obtained in the coronal part of the Single Bond universal group treated with MDP-containing self-adhesive resin cement and the lowest strength (4.77 MPa) was observed in apical part of MDP-containing self-adhesive resin cement group (Control). However, the one-way ANOVA results showed no significant difference between all 10 groups (p > 0.05). The self-adhesive cement without adhesive bonding showed no statistically different value compared to self-adhesive cements with adhesive bonding.

scholarly journals Effect of Post-Space Irrigation with NaOCl And CaOCl at Different Concentrations on the Bond Strength of Posts Cemented with a Self-Adhesive Resin Cement

2018 ◽  
Vol 29 (5) ◽  
pp. 446-451 ◽  
Author(s):  
Vivian Gehm Seballos ◽  
Mirela Sangoi Barreto ◽  
Ricardo Abreu da Rosa ◽  
Eduardo Machado ◽  
Luiz Felipe Valandro ◽  
...  
Keyword(s):  
Bond Strength ◽  
Sodium Hypochlorite ◽  
Saline Solution ◽  
Resin Cement ◽  
Control Group ◽  
Calcium Hypochlorite ◽  
Root Canal Filling ◽  
Adhesive Resin ◽  
Adhesive Resin Cement ◽  
Post Space

Abstract The aim of this study was to evaluate the effect of post-space irrigation with NaOCl and CaOCl at different concentrations on the bond strength of posts cemented with a self-adhesive resin cement. Eighty premolars were sectioned 14 mm from the apex, and endodontically treated. The root canal filling was partially removed. Specimens were randomly assigned into 8 groups (n=10), according to the irrigant for post-space irrigation: SS - 0.9% saline solution (control group); CHX - 2% chlorhexidine; 1% NaOCl - 1% sodium hypochlorite; 2.5% NaOCl - 2.5% sodium hypochlorite; 5% NaOCl - 5% sodium hypochlorite; 1% CaOCl - 1% calcium hypochlorite; 2.5% CaOCl - 2.5% calcium hypochlorite; and 5% CaOCl - 5% calcium hypochlorite. For each group, irrigation was performed continuously with 2 ml of solution. The post-spaces were dried with paper points (#80), and glass fiber posts were cemented using a self-adhesive resin cement. The specimens were sectioned perpendicularly and the push-out test was performed. Optical microscopy was used to analyze the failure mode. ANOVA and Bonferroni tests analyzed the bond strength data. NaOCl and CaOCl presented similar bond strength regardless the concentration used to irrigate the post-space (p>0.05). SS showed the highest bond strength (11.47 MPa) (p<0.05). Adhesive failures at the cement/dentin interface were predominant (58.33%). Saline solution should be irrigant of choice to irrigate the post-space before fiber post cementation with self-adhesive resin cement. NaOCl and CaOCl negatively affect the bond strength values.

scholarly journals Influence of Different Surface Pretreatments on Shear Bond Strength of an Adhesive Resin Cement to Various Zirconia Ceramics

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 652 ◽  
Author(s):  
Marco Colombo ◽  
Simone Gallo ◽  
Sara Padovan ◽  
Marco Chiesa ◽  
Claudio Poggio ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Tetragonal Zirconia ◽  
Resin Cement ◽  
Zirconia Ceramic ◽  
Adhesive Resin ◽  
Surface Pretreatment ◽  
Significant Difference ◽  
Computer Aided ◽  
Adhesive Resin Cement

The aim of this in vitro study was to assess the influence of surface pretreatment on shear bond strength (SBS) of an adhesive resin cement (G-CEM Link Force TM, GC Corporation, Tokyo, Japan) to three different yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramics: (1) Copran Zirconia Monolith HT, COP; (2) Katana ML Zirconia, KAT; and (3) Metoxit Z-CAD HTL Zirconia, MET. In total, 45 cylinders (5 mm in diameter, 1 mm height) for each type of zirconia ceramic were prepared used a computer-aided design and computer-aided manufacturing (CAD/CAM) machine (software CEREC 4.2). Each type of zirconia was subdivided into three groups and each group received a different surface pretreatment; 15 samples were not conditioned as control (groups COP 1, KAT 1, MET 1), 15 samples were air-borne particle abraded with aluminum dioxide particles of 50-μm size at 0.3 MPa for 20 s (groups COP 2, KAT 2, MET 2), and 15 samples were hot-etched with a solution of hydrochloric acid and ferric chloride (groups COP 3, KAT 3, MET 3). After specimen fabrication, the adhesive cement–ceramic interface was analyzed using an SBS test. Subsequently, the adhesive remnant index (ARI) was measured. Data were submitted to statistical analysis. Air-borne particle abraded specimens showed the highest SBS values for COP and KAT groups. For MET, no significant difference was reported between air-borne particle abraded specimens and untreated controls. The lowest values were detected for acid-etched groups. A higher frequency of ARI = “1” and ARI = “2” was reported in control and air-borne particle abraded groups, whereas ARI = “3” was detected in hot-etched groups. No correlation was found between ARI score and shear bond strength. Air-borne particle abrasion is considered the best treatment for Zirconia Copran and Zirconia Katana ML, if it is followed by using dual-curing resin cement.

scholarly journals Pengaruh ukuran mesh permukaan logam terhadap kuat rekat geser semen resin adesif pada restorasi gigitiruan jembatan adesif Effect of metal surface mesh size to shear bond strength of adhesive resin cement to denture adhesive bridge

2012 ◽  
Vol 11 (3) ◽  
pp. 149
Author(s):  
Edy Machmud ◽  
Moh. Dharmautama ◽  
Cencen Tjandi Yanto
Keyword(s):  
Bond Strength ◽  
Metal Surface ◽  
Shear Bond Strength ◽  
Metal Surfaces ◽  
Resin Cement ◽  
Control Group ◽  
Adhesive Resin ◽  
Treatment Groups ◽  
Wax Pattern ◽  
Adhesive Resin Cement

To overcome the failure of cement adhesive bond between tooth and metal surfaces, a variety of alternative treatmentsis applied to the metal and tooth surfaces. In order to overcome this disadvantage, this study deals with the treatmenton the metal surface in mesh form. This research examined different mesh sizes of 40, 60 and 80 mesh to the metalsurface treatment in shear bond strength of adhesive resin cement. 40 pairs of upper central incisors samples wereprepared in palatal surfaces with a thickness of 0.3 mm and made a pattern of blue wax. The samples were divided intofour groups; three mesh treatment groups (40, 60 and 80) and a control group (no mesh). In the treatment groups, amesh was positioned to the opposing surface of wax pattern to the tooth preparation surface, was casted with nickelchromiumalloy, attached to the palatal surface of the teeth with adhesive resin cement, immersed in artificial salivafor 24 hours at 37°C. Moreover, shear bond strength test and residual resin cement on the metal surface were tested inLaboratory of the Department of Metallurgical Engineering. Data was analyzed using one-way ANOVA (p=0.05).Shear bond strength adherence of mesh plates 60 was found greater than 40, 80 and control group. Stereomicroscopeinspection of adhesive resin cement remaining on mesh 60 was similar than 40, but more than mesh 80 or controlgroup. It was concluded shear bond strength of adhesive resin cement to metal surfaces depends on the size of meshused, and shear bond strength of adhesive resin cement that still intact on the mesh surface.

Development of a Cavity Disinfectant Containing Antibacterial Monomer MDPB

2016 ◽  
Vol 95 (13) ◽  
pp. 1487-1493 ◽  
Author(s):  
N. Hirose ◽  
R. Kitagawa ◽  
H. Kitagawa ◽  
H. Maezono ◽  
A. Mine ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Bond Strength ◽  
Bacterial Species ◽  
Oral Bacteria ◽  
Resin Cement ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Significant Difference ◽  
Adhesive Resin Cement

An experimental cavity disinfectant (ACC) that is intended to be used for various direct and indirect restorations was prepared by adding an antibacterial monomer 12-methacryloyloxydodecylpyridinum bromide (MDPB) at 5% into 80% ethanol. The antibacterial effectiveness of ACC and its influences on the bonding abilities of resin cements were investigated. To examine the antibacterial activity of unpolymerized MDPB, the minimum inhibitory and bactericidal concentrations (MIC and MBC) were determined for Streptococcus mutans, Lactobacillus casei, Actinomyces naeslundii, Parvimonas micra, Enterococcus faecalis, Fusobacterium nucleatum, and Porphyromonas gingivalis. Antibacterial activities of ACC and the commercial cavity disinfectant containing 2% chlorhexidine and ethanol (CPS) were evaluated by agar disk diffusion tests through 7 bacterial species and by MIC and MBC measurement for S. mutans. The effects of ACC and CPS to kill bacteria in dentinal tubules were compared with an S. mutans–infected dentin model. Shear bond strength tests were used to examine the influences of ACC on the dentin-bonding abilities of a self-adhesive resin cement and a dual-cure resin cement used with a primer. Unpolymerized MDPB showed strong antibacterial activity against 7 oral bacteria. ACC produced inhibition zones against all bacterial species similar to CPS. For ACC and CPS, the MIC value for S. mutans was identical, and the MBC was similar with only a 1-step dilution difference (1:2). Treatment of infected dentin with ACC resulted in significantly greater bactericidal effects than CPS ( P < 0.05, analysis of variance and Tukey’s honest significant difference test). ACC showed no negative influences on the bonding abilities to dentin for both resin cements, while CPS reduced the bond strength of the self-adhesive resin cement ( P < 0.05). This study clarified that the experimental cavity disinfectant containing 5% MDPB is more effective in vitro than the commercially available chlorhexidine solution to eradicate bacteria in dentin, without causing any adverse influences on the bonding abilities of resinous luting cements.

Sign in / Sign up

Export Citation Format

Share Document