scholarly journals WASTEWATER TREATMENT USING A MODIFIED CELLULOSE ACETATE MEMBRANE

2021 ◽  
Vol 55 (5-6) ◽  
pp. 697-704
Author(s):  
HANANE ABURIDEH ◽  
ZAHIA TIGRINE ◽  
DJAMILA ZIOUI ◽  
SARAH HOUT ◽  
DJILALI TASSALIT ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Cellulose Acetate ◽  
Phase Inversion ◽  
Morphological Structure ◽  
Polymeric Membranes ◽  
Inversion Method ◽  
Cellulose Acetate Membrane ◽  
And Performance ◽  
Phase Inversion Method ◽  
Modified Cellulose

The main objective of this work has been to study the performance of membranes developed for treating purified wastewater. Polymeric membranes have been developed from solutions containing cellulose acetate (AC) and polysulfone (PSF), using N,N-dimethylformamide (DMF) as solvent and polyethylene glycol (PEG) as additive. The phase inversion method was chosen as a technique for producing the membrane films. The incorporation of PEG allowed us to study the effect of the additive on the morphological structure, and to predict the performance of the membranes formed. Examining the flux, permeability and selectivity of the membranes allowed studying the efficiency and performance of each membrane. The application results achieved in wastewater treatment at Chenoua/TIPAZA station were very satisfactory and in accordance with the standards required by WHO. The optimal performance, in terms of permeability and selectivity, was obtained for the MC membrane with the composition: PSF/PEG/AC of 25/12/63.

scholarly journals An Experimental Investigation: Effect of Phase Inversion Methods on Membrane Structure and Its Performance on PEG Filtration

2017 ◽  
Vol 17 (1) ◽  
Author(s):  
Masooma Irfan ◽  
Hatijah Basri ◽  
M. Irfan
Keyword(s):  
Phase Separation ◽  
Phase Inversion ◽  
Multiwall Carbon Nanotubes ◽  
Polymeric Membranes ◽  
Inversion Method ◽  
Inversion Process ◽  
Membrane Morphology ◽  
And Performance ◽  
Phase Inversion Method ◽  
Multiwall Carbon

In this work, the effect of different phase inversion process on membrane morphology and performance was studied. Polyethersulfone (PES) based polymeric membranes was fabricated containing polyvinylpyrrolidone (PVP) and carboxylic functionalized multiwall carbon nanotubes (MWCNT) as additives and polyethylene glycol (PEG) having a molecular weight 1K, 10K and 35K (Dalton) were used as a model solution for observing the rejection/filteration ability of fabricated membranes. Non-solvent induce phase separation (NIP) and dry-wet phase separation (DWP) method was adopted for membrane synthesis. The FTIR spectra showed that PVP/MWCNT was effectively blended with PES polymer and different phase inversion method led to different internal morphologies of membranes as confirmed by FESEM images. The PEG rejection results suggested that membranes formed by DWP method had approximately double rejection ability than membranes formed by NIP process.

Effect of Cellulose Acetate Phthalate (CAP) on Characteristics and Morphology of Polysulfone/Cellulose Acetate Phthalate (PSf/CAP) Blend Membranes

2014 ◽  
Vol 493 ◽  
pp. 640-644 ◽  
Author(s):  
Asmadi Ali ◽  
Rosli Mohd Yunus ◽  
Mohamad Awang ◽  
Anwar Johari ◽  
Ramli Mat
Keyword(s):  
Cellulose Acetate ◽  
Phase Inversion ◽  
Membrane Properties ◽  
Inversion Method ◽  
Hydrophilic Polymer ◽  
Cellulose Acetate Phthalate ◽  
Hydrophobic Membrane ◽  
Blend Membranes ◽  
And Performance ◽  
Uf Membranes

Polysulfone (PSf) membrane is catogorized as hydrophobic membrane that easily fouled during membrane operation process. The presence of second hydrophilic polymer which added into membrane casting solutions plays a crucial role in adjusting the membrane properties. This hydrophilic polymer was employed in hydrophobic polymer membranes in order to improve hydrophilicity and performance as well as formed antifouling ultrafiltration (UF) membranes. In this study, a hydrophilic polymer, cellulose acetate phthalate (CAP) was added into polysulfone (PSf) membrane casting solutions by blending technique to produce PSf/CAP blend membranes. Flat sheet asymmetric PSf/CAP blend membranes were prepared by wet phase inversion method. The results revealed that an increase in CAP increased the hydrophilicity properties of PSf/CAP blend membranes compared to pure PSf membrane. The significant changes in size and numbers of microvoids and macrovoids in the morphological structures of PSf/CAP blend membranes were due to CAP promote the instantaneous liquid-liquid demixing during phase inversion process.

scholarly journals Elaboration and characterization of multilayer polymeric membranes: effect of the chemical nature of polymers

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Youcef Sedkaoui ◽  
Naima Abdellaoui ◽  
Omar Arous ◽  
Hakim Lounici ◽  
Noreddine Nasrallah ◽  
...  
Keyword(s):  
Phase Inversion ◽  
Chemical Nature ◽  
Cellulose Triacetate ◽  
Polymeric Membranes ◽  
Polymeric Membrane ◽  
Inversion Method ◽  
Ion Separation ◽  
Phase Inversion Method ◽  
Pvc Membranes

AbstractThe transport phenomena across polymeric membrane may be enhanced by applying various strengths inside or outside the system. Recently, polymer inclusion membrane (PIM) has been considered one of the most popular methods that acts as a sink for the contaminant and immobilizes it. In the literature, there is no report about how to achieve the synthesis of multi-layer PIMs. In this paper, an improvement of a novel category of membrane without carrier for performing ion separation is reported. Different membranes were elaborated from binary mixtures of polymers, cellulose triacetate (CTA), polymethyl methacrylate (PMMA) and polyvinyl chloride (PVC) using 2-nitrophenyl octyle-ether (NPOE) as plasticizer and carrier in the same time, in order to increase specific interactions between the different polymers. The membranes (Polymer 1– NPOE – Polymer 2) were synthesized by phase inversion method modified by changing the procedure of a plasticizer/carrier addition and characterized by FTIR, TGA, SEM, zeta potential and contact angle. The CTA-based membranes exhibited well-defined pores partially filled with the second polymer and NPOE. Overall, our results showed that the addition of NPOE resulted in homogeneous membranes with modified physical properties, such as thickness, and hydrophobicity. A study of transport of Pb(II) using the synthesized membranes was studied. Dialysis experiments of lead ions across a polymeric membrane have shown that (CTA + NPOE + PMMA) and (PMMA + NPOE + PVC) membranes proved a good performance in one stage by fixing 12.15 and 25.31% of lead, respectively, without any additionally added carrier and acids. These results confirm the affinity between a basic polymer (poly-methyl methacrylate) and the metallic ion (Pb2+).

scholarly journals Investigating the Antibacterial Activity of Polymeric Membranes Fabricated with Aminated Graphene Oxide

Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 510
Author(s):  
Muhammad Zahid ◽  
Saba Akram ◽  
Anum Rashid ◽  
Zulfiqar Ahmad Rehan ◽  
Talha Javed ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Graphene Oxide ◽  
Mechanical Stability ◽  
Water Flux ◽  
Composite Membranes ◽  
Inversion Method ◽  
Cellulose Acetate Membrane ◽  
Functionalized Graphene Oxide ◽  
And Performance ◽  
Phase Inversion Method

A novel, functionalized graphene oxide–based cellulose acetate membrane was fabricated using the phase inversion method to improve the membrane characteristics and performance. We studied the effect of aminated graphene oxide (NH2–GO) composite on the CA membrane characteristics and performance in terms of membrane chemistry, hydrophilicity, thermal and mechanical stability, permeation flux, and antibacterial activity. The results of contact angle and water flux indicate the improved hydrophilic behavior of composite membranes in comparison to that of the pure CA membrane. The AGO-3 membrane showed the highest water flux of about 153 Lm−2h−1. The addition of hydrophilic AGO additive in CA membranes enhanced the antibacterial activity of AGO–CA membranes, and the thermal stability of the resulting membrane also improved since it increases the Tg value in comparison to that of a pristine CA membrane. The aminated graphene oxide (NH2–GO) was, therefore, found to be a promising additive for the fabrication of composite membranes with potent applications in wastewater treatment.

scholarly journals Cellulose acetate butyrate graphene oxide nanocomposite membrane: Fabrication, characterization, and performance

2020 ◽  
pp. 22-22
Author(s):  
Majed Alghamdi ◽  
Adel El-Zahhar
Keyword(s):  
Graphene Oxide ◽  
Cellulose Acetate ◽  
Water Flux ◽  
Cellulose Acetate Butyrate ◽  
Inversion Method ◽  
Dramatic Improvement ◽  
Salt Rejection ◽  
And Performance ◽  
Phase Inversion Method ◽  
Acetate Butyrate

In this study the effects of graphene oxide (GO) nanosheets on the physicochemical properties and performances of cellulose acetate butyrate (CAB) membranes were investigated. Nanocomposite membranes were fabricated using Cand a small amount of GO in the range of 0 to 0.07 wt.%, using a conventional phase-inversion method. Membranes were characterized by different methods and their performances were tested using a dead-end filtration system. Compared with pristine Cmembrane, experimental results demonstrated an improvement in features such as hydrophilicity, permeability, salt rejection, antifouling, and stability. The results proved an increase in the porosity and pore sizes of membranes with GO addition. Furthermore, the membrane containing 0.07 wt.% of GO exhibited a low contact angle of 37? and a dramatic improvement in water flux of about 450% (from 2 to 11 L/m2 h). Moreover, it demonstrated a salt rejection of 39% for NaCl and 87% for Na2SO4, corresponding to improvements of about 144% and 93%, respectively. Furthermore, the results revealed a higher antifouling property with an 86% improvement in flux recovery and higher stability in terms of performance and thermal properties compared to CAB.

scholarly journals Pengolahan Air Limbah Menjadi Air Minum Dengan Menghilangkan Amonium Dan Bakteri E-Coli Melalui Membran Nanofiltrasi

2018 ◽  
Vol 1 (1) ◽  
pp. 6
Author(s):  
Malikhatul Hidayah
Keyword(s):  
Waste Water ◽  
Wastewater Treatment ◽  
Water Treatment ◽  
Cellulose Acetate ◽  
Solid Phase ◽  
Inversion Method ◽  
Cellulose Acetate Membrane ◽  
Cellulose Acetate Membranes ◽  
Treatment Research ◽  
Non Fouling

<p><em>Industrial waste water area that flows in the River Flood Canal Semarang can affect the environment if not done processing. Membrane is one alternative water treatment technologies with the principle of filtration. The presence of fouling is a problem encountered in the use of the membrane. In this study will be made of non-fouling nanofiltration membranes made from cellulose acetate. Manufacture of cellulose acetate membrane is accomplished by phase inversion method, which is changing the shape of the polymer solid phase into the liquid phase rich in solvent into solids (membrane) which is rich in polymer. Therefore, the aim of this study was to create a non-fouling nanofiltration membrane using cellulose acetate polymer as well as assess the effect of PEG additives and pre-treatment with UV light to the surface of the structure and performance of cellulose acetate membranes for produced water treatment. Research using cellulose acetate membranes for wastewater treatment is done by varying the type of PEG 1500 and 4000, variations of PEG of 1, 3 and 5% by weight and a UV irradiation for 10, 20 and 30 seconds. The research followed by testing the performance of the membrane in wastewater treatment using a dead-end filtration with the parameters of flux and rejection. Characterization of the membrane was analyzed with SEM and FTIR. Analysis of the results was conducted to determine the levels of turbidity, TDS, COD, Ca<sup>2+</sup>, S<sup>2-</sup> and oil in waste water before and after passing through the membrane.</em><em></em></p>

Sign in / Sign up

Export Citation Format

Share Document