scholarly journals An Economic Examination of Solar Energy with Storage based Supply Options: Solar PV-Battery and CSP with Thermal-Storage

Renewable energy is being promoted amidst rising environmental concerns associated with fossil-fuel usage for power generation. The stock of such fuels is also limited and is fast depleting. Renewable energy sources such as solar photovoltaic (PV) systems present a clean alternative that has become cost-competitive with conventional thermal power generation systems. However, to counter the intermittent nature of solar power and ensure firm power supply, energy storage is essential. This paper presents a comparative analysis of power supply options based on two solar energy technologies - PV and concentrated solar power (CSP). Energy storage in the form of battery and thermal energy respectively has been included and different combinations of supply options, along with utility grid, have been analyzed in terms of the levelized cost of electricity (LCOE). The LCOE values for supplying a particular substation load in India have been compared and it was found that CSP with thermal energy storage emerged to be the economically viable option for supplying the load.

2020 ◽  
Vol 6 (2) ◽  
pp. 76-85
Author(s):  
Nur Hafeizza Ramly

Emergency Portable Solar Power Supply is a product which uses renewable energy sources as the main sources of electricity which is sunlight. According to World Energy Outlook (WEO) 2018, the percentage of renewable energy used as a source to generate electricity grew by 17% higher than the 10-year average and solar energy contributed more than a third despite accounting for just 21% of the total. The main objective of this product is to create clean energy emergency portable solar power supply by using non-conventional energy source and green technology which can be used during any contingency happens and also for the usage for rural area with non-electric power source. This project was started by calculation of the system design for determining the characteristic that need to be used for all components that related to this solar system such as battery, charge controller, solar panel and etc. The overall system of this portable solar power supply is 12V system. This design can last for 2 days without charging and the minimum hour for the battery to be charged is around 6 hours. This product can supply maximum up to 100W of DC and AC power supply. In a conclusion, this product is very portable and greener product the usage of solar energy as the main sources to generate electricity.


2017 ◽  
Vol 19 (10) ◽  
pp. 2427-2438 ◽  
Author(s):  
Xinyue Peng ◽  
Thatcher W. Root ◽  
Christos T. Maravelias

Concentrating solar power (CSP) with thermal energy storage has the potential for grid-scale dispatchable power generation.


Author(s):  
N. V. Tsopa ◽  
A. E. Dikarev

in the article provides a comparative analysis of the development of solar energy in the world, in the European Union, in Russia and in Crimea; the advantages and disadvantages of the use of solar energy, the features of the use of renewable energy sources are considered, the use of solar energy in the Crimea is justified; describes the mechanism of a feasibility study for the use of autonomous power supply for low-rise buildings in Crimea.


2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Huang Huanhai

The potential crisis of energy and the deterioration of ecological environment make the world's cumbersomedevelopment of renewable energy including new energy, including solar energy. Traditional energy in the coal, oil andnatural gas are evolved from ancient fossils, it is collectively referred to as fossil fuels. As the world's energy needscontinue to increase, fossil fuels will also be depleted, it is necessary to fi nd a new energy to replace the traditionalenergy. Solar energy is a clean renewable energy with mineral energy incomparable superiority. Modern society shouldbe a conservation-oriented society, and social life should also be a life-saving energy. At the same time, Premier WenJiabao also proposed on June 30, 2005 and stressed the need to speed up the construction of a conservation-orientedsociety. And solar energy as an inexhaustible new environmentally friendly energy has become the world's energyresearch work in the world an important issue. Is the world in the economic situation to take a simpler, economical,environmentally friendly and reliable building heating and heating energy-saving measures. This paper summarizes thecurrent global energy status, indicating the importance of solar power and prospects. Details of the various solar powergeneration methods and their advantages, and made a comparison of this power generation parameters. At the sametime pointed out that the diffi culties faced by solar power and solutions, as well as China's solar power of the favorableconditions and diffi culties. The future of China's solar energy made a prospect.


2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Ligan Budi Pratomo ◽  
Nazaruddin Sinaga

Energy use always increases, especially fossil energy. Through the National Energy Policy, the government continues to strive to increase the role of new and renewable energy sources so as to reduce dependence on fossil energy. Solar power generation is a type of renewable energy generator that capable to convert solar energy to electric energy. The main components of solar power generatios are batteries, solar panels, charger controllers, and inverters.  Solar power generations technology itself is always being developed, such as automatic monitoring and sun tracking systems designed to improve system performance. One of the applications of solar power generations is in the household sector. In this sector consumes 49% of the national electricity energy in 2018. This type of generator is categorized as a roof solar power generations. Based on existing data, there were 1400  roof solar power generations users in September 2019. The development of solar energy utilization for the household sector is very appropriate because it can help achieve renewable energy about 23% in 2025 and 31% in 2050 in the national energy mix.


2015 ◽  
Vol 5 (1) ◽  
pp. 4 ◽  
Author(s):  
Clement Ehimika Ohireime Onime ◽  
James Uhomoibhi ◽  
Ermanno Pietrosemoli

It is becoming increasingly important to include information about power generation from renewable energy sources in the training of electrical engineers. Solar energy is arguably the most common renewable energy source in use today. Providing practical hands-on training on solar energy power generation today requires the use of photovoltaic panel devices which are used for transforming solar energy into electrical energy. In many developing countries, practical hands-on training on solar power generation is limited due to the cost of photovoltaic panel devices and so the training consists of theoretical and tutorial classes sometimes supported by remote and virtual laboratories. This paper presents an augmented virtuality tool where real-time information from a mobile device’s sensors is used directly within a virtual or computer generated environment. The tool provides a practical context for hands-on tutorial exercises on solar energy power generation.


Author(s):  
Mykhailo Syvenko ◽  
Oleksandr Miroshnyk

A detailed substantiation of the use of electric energy storage devices in the presence of generators on renewable energy sources in the power supply system is given. The dependence of the storage parameters on the composition and priority of generation in the system is investigated. The solution of the problem of determining the parameters of electricity storage devices by means of purposeful simulation of generation parameters is considered. The results of the choice of power and capacity of the energy storage using technical and economic indicators are shown. Optimal parameters of electric energy storage devices as one of the most important means of ensuring the activity of isolated power supply systems together with selection of generating devices are determined. The results of calculations of capacity of renewable energy sources in isolated power supply systems in combination with classical energy sources are given. The necessity of using the principle of activity of the distribution electric network and the possibility of its realization is demonstrated. The optimal storage capacity as a function of the share of renewable generation, the non-integrated energy produced by renewable sources and the total storage capacity are plotted for several isolated systems. The main points of the used model of the power supply system of isolated networks are given. In the studied isolated power supply systems, wind power plants and solar power plants, which have significant unpredictability of generation, are used as generation based on renewable energy sources. The problem of undersupply of electricity to the grid by stepwise increase of generation is analysed. The results of the multi-step selection of power and energy consumption of electricity storage are determined by technical criteria.


Author(s):  
K. T. N. Ihsan ◽  
A. D. Sakti ◽  
K. Wikantika

Abstract. Increasing the production of clean and environmentally friendly energy has become one of the world agendas as a strategic effort in dealing with long-term climate change. Seeing the potential of the energy produced, the ease in the installation process, with the small risk of harm generated, solar energy has received significant attention from many countries in the world. The potential for solar energy in Indonesia alone reaches 207 GWp, but only 145.81 MWp has been utilized. Currently, the Indonesian government has set a target to build a Solar Power Plant capacity in 2025 of 6.5 GWh. Urban areas are areas with higher energy demand than rural areas, but the availability of vacant land in urban areas is very minimal for installing solar power plants. Therefore, rooftop solar PV(Photovoltaic) can be a solution in dense areas such as cities. Good planning by looking at the potential resources and energy needs in spatial is needed to manage and utilize energy optimally and sustainably in urban areas. This study aims to develop a geospatial assessment for plan smart energy city that uses rooftop solar PV's potential energy in every building that is effective and efficient. The novelty in the analysis of the distribution of the potential for rooftop solar PV development in urban areas integrates meteorological and spatial aspects and socio-economic aspects. Integration of multi-dynamic spatial data uses in determining the rooftop solar PV construction location, such as meteorological data for solar energy potential, increasing energy needs of each building, and socio-economy data. The data source used comes from statistical data and remote sensing data. The analysis will be carried out temporally (2008, 2013, and 2018) to see the pattern of changes in aspects used in a certain period so that the development plan can be carried out more optimally. This research's output is the formation of a priority analysis of solar PV rooftop construction in urban areas, especially the city of Bandung. The result of energy can also produce by the construction of rooftop solar PV in a potential area. This research is expected to be utilized by policymakers to develop renewable energy in the city of Bandung and increase community participation in switching to renewable energy.


Author(s):  
A. Tunc ◽  
G. Tuncay ◽  
Z. Alacakanat ◽  
F. S. Sevimli

<p><strong>Abstract.</strong> Today, countries are shifting their energy policies towards to renewable energy sources. The main reasons for this can be summarized as the reduction of fossil fuel resources, resulting in cost increase and their harmful effect on the ecological balance. Since renewable energy sources are both economical and eco-friendly, for countries which have high solar energy potential such as Turkey, it is reasonable to direct their energy policies to solar energy which is a renewable energy source.</p><p>In this study, the development of renewable energy legislation in Turkey, from past to present has been examined and implementation steps for the licenced and unlicensed generation of electricity from solar energy have been introduced. Ten impact factors have been identified as the first step for the implementation of the solar power plant site selection in Istanbul, which was determined as the pilot region. Impact factors weighted using Analytical Hierarchy Process (AHP) method. Concurrently, the weights of these determined impact factors were compared with the weights obtained by evaluating the results of the “Evaluation of Solar Energy Power Plant Site Selection Factors” survey conducted during the study. After obtaining the weights, the relevant data were collected and the necessary analyses were performed with the help of the GIS software and the most suitable places were provided for the solar power plant for Istanbul.</p>


Sign in / Sign up

Export Citation Format

Share Document