scholarly journals Using Co-Precipitation Method Determining Synthesis and Characterization of Fe Doped Zinc Oxide Nanoparticles

In through concoction co-precipitation strategy using ferric nitrate, zinc nitrate and sodium hydroxide in fluid arrangements, orchestrate and portrayal of Fe doped ZnO nanoparticles were prepared in the present work. X-beam diffraction has confirmed the growth of Fe doped ZnO from the precursor. This result has revealed that nanoparticles have integrated excellent crystalline forces in nature. SEM investigations show that ZnO nanoparticles have been doped by the round and minimally agglomerated Fe. Room temperature powerless ferromagnetism, distinctive in the appealing characteristics of Fe doped ZnO powderKeywords in relation to room temperature: zinc oxide, SEM, chemical precipitation, XRD, VSM

2020 ◽  
Vol 1007 ◽  
pp. 143-147
Author(s):  
Sujittra Kaenphakdee ◽  
Supan Yodyingyong ◽  
Jeerapond Leelawattanachai ◽  
Wannapong Triampo ◽  
Noppakun Sanpo ◽  
...  

Undoped ZnO and Ag-doped ZnO were prepared to use as near-infrared (NIR) shielding by simple precipitation method with zinc acetate and zinc nitrate as Zn precursor and silver nitrate as Ag precursor. The Ag-doped ZnO and undoped ZnO were characterized by XRD, SEM, and UV-vis-NIR spectrophotometer. The NIR reflectance performance reveals that Ag-doping improves the NIR shielding and optical property of pure ZnO. The 10 mol% Ag loading shows the lowest reflection in the visible region of about 15% and the highest reflection in the NIR region of about 50%. It not only shows the best NIR reflection but also exhibits the best thermal insulation. It reduces the inner temperature of the in-lab setup to mimic a house by 7.5°C when compared to the uncoated glass window. It is concluded that 10 mol% Ag-doped ZnO nanoparticles can result in UV-NIR shielding coatings.


2016 ◽  
Vol 675-676 ◽  
pp. 69-72
Author(s):  
Krisana Chongsri ◽  
Wanichaya Mekprasart ◽  
Wisanu Pecharapa

In this work, we reported the preparation of F-doped ZnO nanoparticles by facile precipitation process using zinc nitrate and ammonium fluoride as starting precursors for Zn and F, respectively dissolved in deionized water. The precursor solution was prepared at various fluoride composition ranging from 1-5 wt%. The as-precipitated powders were calcined at different temperature from 500 °C to 700 °C for 2 h. Effect of calcination temperature and fluoride concentration on structural, morphologies, optical and electrical properties were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), UV-Vis spectroscopy, respectively. XRD results indicated the complete formation of hexagonal wurtzite structure of ZnO. SEM micrographs showed the agglomeration for each sample that noticeably influenced by fluoride content.


RSC Advances ◽  
2017 ◽  
Vol 7 (63) ◽  
pp. 39657-39665 ◽  
Author(s):  
Anju Anna Jacob ◽  
L. Balakrishnan ◽  
K. Shambavi ◽  
Z. C. Alex

Cobalt doping enhances visible absorption in ZnO nanoparticles as a result of d–d transitions. By co-precipitation method, Zn1−xCoxO nanoparticles had been synthesised and multiband photodetectors were fabricated after characteristic analysis.


2010 ◽  
Vol 129-131 ◽  
pp. 1233-1237
Author(s):  
Hong Yan Xu ◽  
Mei Sheng Liang ◽  
Chun Hu Li

Using ferric nitrate, zinc nitrate, ammonia liquor and binder as main raw materials, five kinds of zinc ferrite sorbents were prepared by the co-precipitation method. The effects of the different binders on the structure and texture of zinc ferrite sorbents were investigated. The morphology, composite structure, pore properties, and mechanical strength were studied by using modern several physicochemical techniques such as powder X-ray diffraction (XRD), scanning electronic microscopy (SEM), strength tester and gas absorption meter. It is showed that spinel structure ZnFe2O4 is not affected by different binders,and its particle diameter is in micron leve1. The spinel structures are present in the sorbents that have been calcined at 750 0C.. The sorbent employed kaolinite as binder is the best one of the five types of sorbents for desulfurization, while the one employed diatomite is the worst.Different binders modify the textural properties, modifying consequently the sorbent reactivity. Furthermore, the reactivity and sulfur capacity of sorbents are increasing with an increase in the pore volume.


2006 ◽  
Vol 17 (5) ◽  
pp. 1278-1285 ◽  
Author(s):  
O D Jayakumar ◽  
H G Salunke ◽  
R M Kadam ◽  
Manoj Mohapatra ◽  
G Yaswant ◽  
...  

2015 ◽  
Vol 827 ◽  
pp. 43-48
Author(s):  
Annisa Noorhidayati ◽  
Mia Putri Rahmawati ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh

Transition metal ions (Co and Cr) doped ZnO nanoparticles supported on natural zeolite were synthesized using co-precipitation method. The synthesized samples were characterized by means of X-ray diffraction, energy dispersive X-ray, Fourier-transform infrared absorption, and UV-visible diffuse reflectance spectroscopy. The samples were further used as photocatalyst for degradation of methyl orange and methylene blue in aqueous solutions under UV light irradiation. The results showed that zeolite supported Cr-doped ZnO nanoparticles is more efficient compared with zeolite supported Co-doped ZnO nanoparticles. It is also revealed that zeolite supported samples possessed higher photocatalytic efficiency compared to bare samples.


Sign in / Sign up

Export Citation Format

Share Document