scholarly journals Analysis of the effect of compaction variations on the hardness of the reduced sponge iron from iron sand in South Aceh Regency

2021 ◽  
Vol 17 (1) ◽  
pp. 53
Author(s):  
Reza Putra ◽  
Muhammad Sayuti ◽  
Muhammad Yusuf ◽  
Muhammad Muhammad ◽  
Muhammad Faisal
Keyword(s):  
JOM ◽  
1966 ◽  
Vol 18 (8) ◽  
pp. 923-931
Author(s):  
Leonard Klein
Keyword(s):  

Author(s):  
H. İbrahim Ünal ◽  
Enes Turgut ◽  
Ş. H. Atapek ◽  
Attila Alkan

AbstractIn this study, production of sponge iron by direct reduction of oxides and the effect of reductant on metallization were investigated. In the first stage of the study, scale formed during hot rolling of slabs was reduced in a rotating furnace using solid and gas reductants. Coal was used as solid reductant and hydrogen released from the combustion reaction of LNG was used as the gas one. The sponge iron produced by direct reduction was melted and solidified. In the second stage, Hematite ore in the form of pellets was reduced using solid carbon in a furnace heated up to 1,100°C for 60 and 120 minutes. Reduction degree of process was evaluated as a function of time and the ratio of C


2014 ◽  
Vol 31 (10) ◽  
pp. 541-547 ◽  
Author(s):  
Yan Liu ◽  
Xi-Kui Wang ◽  
Bing Chen ◽  
Chen Wang ◽  
Ting-Ting Shen

2021 ◽  
Vol 98 ◽  
pp. 8-13
Author(s):  
Dung Ngo Quoc ◽  
◽  
Viet Nguyen Hoang

MS1200 steel grade is now widely utilized in the automotive sector because it is a good solution for the current trend of vehicle chassis frame construction. This research presents a technology procedure for producing MS1200 steel grade from low carbon steel scrap and sponge iron – a product of MIREX Vietnam. The smelting using up to 30 % sponge iron briquettes combined with low carbon scrap, FeSi, FeMn, FeCr, FeTi,… was realized in a medium frequency induction furnace. The heat treatment for forged steel was performed to obtain required properties. The steel product has the following properties: tensile strength σb = 1280 MPa, yield strength σ0.2 = 990 MPa and impact toughness ak = 769 J/mm2, that meets the need of industrial use.


2019 ◽  
Vol 9 (1) ◽  
pp. 1
Author(s):  
Sovian Aritonang ◽  
Jupriyanto Jupriyanto ◽  
Riyadi Juhana

<p>The number of iron sand reserves is mostly spread in the coastal waters of Indonesia, from the coast of Sumatra, the southern of Java to Bali, the beaches of Sulawesi, beaches in East Nusa Tenggara (NTT), and the northern coast of Papua. Total reserves for ore are 173,810,612 tons and metal as much as 25,412,652.62 tons. But its utilization was not optimal because PT. Krakatau Steel, and PT. Krakatau Posco has produced steel plates only 24,000 to 36,000 tons per year. While the need for steel plates for the shipping industry each year requires 900,000 tons per year. With the need for raw material for steel plates in the form of iron sponges with Fe ≥ 60%, PT. Krakatau Steel is still imported from abroad. The proof is PT. Krakatau Steel before and during the year 2000 still imported Iron Ore Pellets from the countries of Sweden, Chille and Brazil for 3,500,000 tons per year. This condition is the cause of the national steel industry unable to compete with the foreign steel industry because imported raw materials are subject to import duties. This is an opportunity to build a steel raw material company because all this time the steel raw material industry in Indonesia has only two companies. This condition encourages the manufacture of iron sponges, with the process of making iron sponges with technology adapted to installed production capacity. This study analysed the manufacture of iron sponges using Cipatujah iron sand, as raw material for the manufacture of iron sponges, with the results obtained in the form of iron sponges with the highest levels of Fe ≥60.44%. This can be used for the purposes of raw materials for steel making PT. Krakatau Steel (PT. KS), because so far PT. KS claims that Fe &lt;60% local sponge iron products. This can encourage the independence of steel raw materials, which impacts on the independence of the defence industry. But the government must also protect and prioritize steel raw materials for national production for national steel production. With the national government steel industry, the consortium of vendors supplying raw material (iron sponge) to maintain the quality and supply of continuous sponge iron.</p><p><strong>Keywords</strong>: iron sand, iron pellet, iron sponge</p>


Sign in / Sign up

Export Citation Format

Share Document