scholarly journals Adsorption Of Heavy Metals From Groundwater Using Titanate Nanoparticles Doped With Cross-Linked Polyvinyl Alcohol. Bahr El-Baqar Drain Region, El-Husinia, East Delta-Egypt

2019 ◽  
Vol 378 ◽  
pp. 120751 ◽  
Author(s):  
Huafeng Tian ◽  
Li Yuan ◽  
Jianguo Wang ◽  
Hao Wu ◽  
Hailiang Wang ◽  
...  

2015 ◽  
Vol 41 (1) ◽  
pp. 43-52 ◽  
Author(s):  
Małgorzata Kuczajowska-Zadrożna ◽  
Urszula Filipkowska ◽  
Tomasz Jóźwiak

Abstract This study was undertaken to determine the effectiveness of biosurfactants - saponin, tannin and rhamnolipids JBR 515 and 425, for the removal of cadmium, zinc and copper from activated sludge immobilized in 1.5% sodium alginate with 0.5% polyvinyl alcohol. We also established the impact of pH value on biosorbent regeneration with the analyzed biosurfactants and determined the critical micelle concentration (CMC) in solutions containing the biosorbent and biosurfactant and in exact samples with heavy metals. Saponin exhibited the highest effectiveness of metals leaching at pH 1-5, and rhamnosides at pH 5-6. In addition, the study demonstrated a significant effect of the ratio of biosorbent mass to washing agent volume (m/V) on the effectiveness of metals leaching. Of the biosurfactants analyzed, saponin was ca. 100% effective in leaching zinc and copper. The effectiveness of the other biosurfactants was lower and depended on the metal being leached


2016 ◽  
Vol 74 (10) ◽  
pp. 2305-2313 ◽  
Author(s):  
Majid Riahi Samani ◽  
Parisa Ebrahimbabaie ◽  
Hamed Vafaei Molamahmood

Over the past few years, heavy metals have been proved to be one of the most important contaminants in industrial wastewater. Chromium is one of these heavy metals, which is being utilized in several industries such as textile, finishing and leather industries. Since hexavalent chromium is highly toxic to human health, removal of it from the wastewater is essential for human safety. One of the techniques for removing chromium (VI) is the use of different adsorbents such as polyaniline. In this study, composites of polyaniline (PANi) were synthesized with various amounts of polyvinyl alcohol (PVA). The results showed that PANi/PVA removed around 76% of chromium at a pH of 6.5; the PVA has altered the morphology of the composites and increased the removal efficiency. Additionally, synthesis of 20 mg/L of PVA by PANi composite showed the best removal efficiency, and the optimal stirring time was calculated as 30 minutes. Moreover, the chromium removal efficiency was increased by decreasing the pH, initial chromium concentration and increasing stirring time.


2017 ◽  
Vol 98 ◽  
pp. 266-275 ◽  
Author(s):  
Katayoon Kalantari ◽  
Amalina M. Afiffi ◽  
Ariesman Salleh ◽  
Edzrol Niaz Mohamad ◽  
Zahra Izadiyan

Author(s):  
Randall W. Smith ◽  
John Dash

The structure of the air-water interface forms a boundary layer that involves biological ,chemical geological and physical processes in its formation. Freshwater and sea surface microlayers form at the air-water interface and include a diverse assemblage of organic matter, detritus, microorganisms, plankton and heavy metals. The sampling of microlayers and the examination of components is presently a significant area of study because of the input of anthropogenic materials and their accumulation at the air-water interface. The neustonic organisms present in this environment may be sensitive to the toxic components of these inputs. Hardy reports that over 20 different methods have been developed for sampling of microlayers, primarily for bulk chemical analysis. We report here the examination of microlayer films for the documentation of structure and composition.Baier and Gucinski reported the use of Langmuir-Blogett films obtained on germanium prisms for infrared spectroscopic analysis (IR-ATR) of components. The sampling of microlayers has been done by collecting fi1ms on glass plates and teflon drums, We found that microlayers could be collected on 11 mm glass cover slips by pulling a Langmuir-Blogett film from a surface microlayer. Comparative collections were made on methylcel1ulose filter pads. The films could be air-dried or preserved in Lugol's Iodine Several slicks or surface films were sampled in September, 1987 in Chesapeake Bay, Maryland and in August, 1988 in Sequim Bay, Washington, For glass coverslips the films were air-dried, mounted on SEM pegs, ringed with colloidal silver, and sputter coated with Au-Pd, The Langmuir-Blogett film technique maintained the structure of the microlayer intact for examination, SEM observation and EDS analysis were then used to determine organisms and relative concentrations of heavy metals, using a Link AN 10000 EDS system with an ISI SS40 SEM unit. Typical heavy microlayer films are shown in Figure 3.


Sign in / Sign up

Export Citation Format

Share Document