One-step Synthesis of Barium Hexaferrite Nanocrystals via Microwave-assisted Sol-Gel auto-Combustion and their Magnetic Properties

2009 ◽  
Vol 24 (6) ◽  
pp. 1193-1196
Author(s):  
Jun-Liang LIU ◽  
Cui-Jing GUO ◽  
Wei ZHANG ◽  
Rong-Jin JI ◽  
Yan-Wei ZENG
2010 ◽  
Vol 30 (4) ◽  
pp. 993-997 ◽  
Author(s):  
Liu Junliang ◽  
Zeng Yanwei ◽  
Guo Cuijing ◽  
Zhang Wei ◽  
Yang Xiaowei

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5873
Author(s):  
Abdulmumeen Lohmaah ◽  
Komkrich Chokprasombat ◽  
Supree Pinitsoontorn ◽  
Chitnarong Sirisathitkul

The copper (Cu) substitution in barium hexaferrite (BaFe12O19) crystals from the sol-gel auto-combustion synthesis is demonstrated as a cost-effective pathway to achieve alterable magnetic properties. Subsequent heat treatments at 450 °C and 1050 °C result in irregularly shaped nanoparticles characterized as the M-type BaFe12O19 with the secondary phase of hematite (α-Fe2O3). Despite the mixed phase, the substantial coercivity of 2626 Oe and magnetization as high as 74.8 emu/g are obtained in this undoped ferrite. The copper (Cu) doing strongly affects morphology and magnetic properties of BaFe12−xCuxO19 (x = 0.1, 0.3, and 0.5). The majority of particles become microrods for x = 0.1 and microplates in the case of x = 0.3 and 0.5. The coercivity and magnetization tend to reduce as Cu2+ increasingly substitutes Fe3+. From these findings, magnetic properties for various applications in microwave absorbers, recording media, electrodes, and permanent magnets can be tailored by the partial substitution in hexaferrite crystals.


2016 ◽  
Vol 494 ◽  
pp. 33-40 ◽  
Author(s):  
I. Odeh ◽  
H.M. El Ghanem ◽  
S.H. Mahmood ◽  
S. Azzam ◽  
I. Bsoul ◽  
...  

2014 ◽  
Vol 493 ◽  
pp. 656-660 ◽  
Author(s):  
Widyastuti ◽  
Endah Kharismawati ◽  
M. Zainuri ◽  
Hosta Ardhyananta

Barium hexaferrite (BaFe12O19) with hexagonal structure has been known as the high performance magnetic for Radar Absorber Material (RAM). Barium hexaferrite (BaM) was synthesized by sol gel auto combustion to get an homogeneous nanoparticle of BaM. Barium hexaferrites obtained from solution mixture between barium nitrate and ferri nitrate nonahidrat with precipitation of ion barium (Ba2 +) and ferri (Fe3 +) by solution of sodium hydroxide. Sample prepared with mol ratio of Fe / Ba 11 then added ammoniac in order that pH varies become 7,5; 9; and 11. Citric acid added in order that happen process of combustion. The stirring time was varieties by 1, 2, 3 hours. The effect of pH, stirring time, microstructure, phase,and magnetic properties were investigated using X-ray diffraction (XRD), Scanning Electron Microscope (SEM) and a vibrating sample magnetometer (VSM). The results showed that the highest coercivity was 0.6 Tesla and the smallest crystal size 414.409 nm was obtained for pH 7.5 and stirring time 2 hours. The largest magnetic saturation 55.54 emu /g was reached for pH 7.5 with stirring time 1 hour


2020 ◽  
Vol 10 (2) ◽  
pp. 152-156 ◽  
Author(s):  
Muhammad Hanif bin Zahari ◽  
Beh Hoe Guan ◽  
Lee Kean Chuan ◽  
Afiq Azri bin Zainudin

Background: Rare earth materials are known for its salient electrical insulation properties with high values of electrical resistivity. It is expected that the substitution of rare earth ions into spinel ferrites could significantly alter its magnetic properties. In this work, the effect of the addition of Samarium ions on the structural, morphological and magnetic properties of Ni0.5Zn0.5SmxFe2-xO4 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) synthesized using sol-gel auto combustion technique was investigated. Methods: A series of Samarium-substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5SmxFe2-xO4 where x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by sol-gel auto-combustion technique. Structural, morphological and magnetic properties of the samples were examined through X-Ray Diffraction (XRD), Field-Emission Scanning Electron Microscope (FESEM) and Vibrating Sample Magnetometer (VSM) measurements. Results: XRD patterns revealed single-phased samples with spinel cubic structure up to x= 0.04. The average crystallite size of the samples varied in the range of 41.8 – 85.6 nm. The prepared samples exhibited agglomerated particles with larger grain size observed in Sm-substituted Ni-Zn ferrite as compared to the unsubstituted sample. The prepared samples exhibited typical soft magnetic behavior as evidenced by the small coercivity field. The magnetic saturation, Ms values decreased as the Sm3+ concentration increases. Conclusion: The substituted Ni-Zn ferrites form agglomerated particles inching towards more uniform microstructure with each increase in Sm3+ substitution. The saturation magnetization of substituted samples decreases with the increase of samarium ion concentration. The decrease in saturation magnetization can be explained based on weak super exchange interaction between A and B sites. The difference in magnetic properties between the samples despite the slight difference in Sm3+ concentrations suggests that the properties of the NiZnFe2O4 can be ‘tuned’, depending on the present need, through the substitution of Fe3+ with rare earth ions.


Sign in / Sign up

Export Citation Format

Share Document