Optimization of Pan Coating Process for Increased Efficiency of Controlled-Release Urea Fertilizer

2021 ◽  
Vol 57 (4) ◽  
pp. 333-342
Author(s):  
Trung Huu Nguyen ◽  
Tran Nguyen Minh An ◽  
Mahboob Alam ◽  
Duc Hoai Tran ◽  
Nghi Tran ◽  
...  
Keyword(s):  
Controlled Release ◽  
Layer Thickness ◽  
Release Time ◽  
Coating Process ◽  
Analysis Method ◽  
Sauter Mean Diameter ◽  
Urea Fertilizer ◽  
The Relationship ◽  
Central Composite ◽  
Controlled Release Urea

The goal of the research is to develop an experimental mathematical model of pan coating process effect on the biodegradable polymer and to determine optimal process parameters. The polymer solution was conducted with phosphated di-starch phosphate, polyvinyl alcohol, and polyacrylic acid and performed as material coating for the controlled-release urea fertilizer. The image analysis method has been used to determine the particle size distribution, Sauter mean diameter of the particle and layer thickness that is novel. The central composite rotatable design has been selected to determine the regression models of the process, which described the relationship between two objective variables as layer thickness, release time with angle of pan, spray flow, and coating time. The statistical analysis results indicate the fitness of model.

scholarly journals Synthesis and Characterization of Controlled-Release Urea Fertilizer from Superabsorbent Hydrogels

2020 ◽  
Vol 20 (3) ◽  
pp. 616
Author(s):  
Salih Muharam ◽  
Afria Fitri ◽  
Lela Mukmilah Yuningsih ◽  
Yulia Mariana Tessa Ayudia Putri ◽  
Isnaini Rahmawati
Keyword(s):  
Controlled Release ◽  
Ph Control ◽  
Superabsorbent Hydrogel ◽  
Urea Fertilizer ◽  
Urea Release ◽  
Controlled Release Urea ◽  
Carboxy Methyl ◽  
Controlled Release Fertilizers ◽  
Superabsorbent Hydrogels

It is very important to develop controlled-release fertilizers to ensure efficiency and environmental protection. This study aims to make a superabsorbent hydrogel-based controlled-release urea fertilizer. Superabsorbent hydrogels were prepared from the cellulose of corn cobs cross-linking with epichlorohydrin, and then an amount of urea as a fertilizer was stored inside the hydrogels (GEL-A). The GEL-A functionalization with carboxy-methyl was also carried out in this study to improve the hydrophilicity of hydrogels (GEL-B). GEL-A and GEL-B were immersed in water at a certain pH and temperature range and the urea concentration released from the hydrogels was monitored by a spectrophotometer. The results showed that the urea released by GEL-A and GEL-B was not much different. Respectively, the urea efficiency of GEL-A and GEL-Bwas around 5.29% and 5.56% for 180 min. The urea released from both hydrogels was not significantly affected by changes in the temperature of the solution. Urea release was influenced by pH, and the rate of urea release of GEL-B was faster than GEL-A, so pH control was needed in the application of this slow-release fertilizer.

Soil microbial community response to controlled-release urea fertilizer under zero tillage and conventional tillage

2010 ◽  
Vol 45 (3) ◽  
pp. 254-261 ◽  
Author(s):  
Newton Z. Lupwayi ◽  
Cynthia A. Grant ◽  
Yoong K. Soon ◽  
George W. Clayton ◽  
Shabtai Bittman ◽  
...  
Keyword(s):  
Microbial Community ◽  
Controlled Release ◽  
Soil Microbial Community ◽  
Conventional Tillage ◽  
Community Response ◽  
Zero Tillage ◽  
Urea Fertilizer ◽  
Soil Microbial ◽  
Controlled Release Urea

Synthesis of Biodegradable Mixing-Polymer as Coating Material for Controlled-Release Urea Fertilizer

2019 ◽  
Vol 1152 ◽  
pp. 43-51 ◽  
Author(s):  
Huu Trung Nguyen ◽  
Van Dat Doan ◽  
Van Dung Trinh
Keyword(s):  
Controlled Release ◽  
Low Cost ◽  
Coating Material ◽  
Urea Fertilizer ◽  
Bonding Structure ◽  
Physico Chemical ◽  
Coating Method ◽  
Urea Release ◽  
Kinetics Of ◽  
Controlled Release Urea

The biodegradable mixing-polymer as low cost, environmentally friendly coating material for controlled-release urea fertilizer was synthesized by borax crosslinked phosphated distarch phosphate (PDSP)/polyvinyl alcohol (PVA) and polyacrylic acid (PAA) via pan coating method. The physico-chemical characteristics of biodegradable mixing-polymer were confirmed by FTIR, TGA and SEM techniques. The kinetics of urea release were also carefully investigated in water and soil. It’s been found that a uniform layer with better bonding structure was created on surface of the mixing-polymer PDSP/PVA-PAA and the time released 70% urea reached 6 hours in water and more than 27 days in soil.

Urea fertilizer forms affect grain corn yield and nitrogen use efficiency

2012 ◽  
Vol 92 (2) ◽  
pp. 341-351 ◽  
Author(s):  
Bernard Gagnon ◽  
Noura Ziadi ◽  
Cynthia Grant
Keyword(s):  
Controlled Release ◽  
Nitrogen Use Efficiency ◽  
Quebec City ◽  
Corn Yield ◽  
N Accumulation ◽  
Nitrogen Use ◽  
Urea Fertilizer ◽  
Significant Difference ◽  
Use Efficiency ◽  
Controlled Release Urea

Gagnon, B., Ziadi, N. and Grant, C. 2012. Urea fertilizer forms affect grain corn yield and nitrogen use efficiency. Can. J. Soil Sci. 92: 341–351. Controlled-release urea may be a good management strategy to increase the efficiency of N fertilizers. In a 3-yr study (2008–2010) conducted on a clay soil near Quebec City, Canada, we compared the effect of polymer-coated urea (PCU), nitrification inhibitor urea (NIU), dry urea and urea ammonium nitrate 32% (UAN) on corn yield, plant N accumulation and soil NO3-N remaining at harvest. Corn was fertilized with urea and PCU at 50, 100 and 150 kg N ha−1 in addition to an unfertilized control (0 N), and NIU and UAN at 150 kg N ha−1. Urea, PCU, and NIU were pre-plant broadcast whereas UAN was side-banded at the six-leaf stage of corn. Response to N fertilization occurred in all years, but the magnitude of the response varied with years. In wet years (2008 and 2009), PCU and NIU resulted in higher grain yield than urea, but the increase was greater for PCU (+0.8 to 1.6 Mg ha−1) than for NIU (+0.3 to 0.6 Mg ha−1). In a dry year (2010), no significant difference was found between urea, PCU and NIU. Yields and apparent N recovery were comparable for PCU and UAN except in the dry year, when plant N accumulation was much higher for the UAN treatment. At harvest, soil NO3-N was increased by PCU in all years. Economic analysis revealed that despite 30% higher cost, PCU gave comparable net returns at equivalent N rate than UAN in wet years. We conclude that controlled-release urea, particularly PCU, would be an additional option to farmers instead of sidedressed UAN application for fertilizing corn grown in eastern Canada.

ÖRGÜTLERDE ÖRGÜTSEL BOLLUĞUN GİRİŞİMSEL ORYANTASYON ÜZERİNDEKİ ETKİSİ

2016 ◽  
Vol 4 (3) ◽  
Author(s):  
Nurdan Gürkan ◽  
Ahmet Ferda Çakmak
Keyword(s):  
Corporate Governance ◽  
Data Analysis ◽  
Panel Data ◽  
Strategic Management ◽  
Significant Relationship ◽  
Entrepreneurial Orientation ◽  
Panel Data Analysis ◽  
Organizational Slack ◽  
Analysis Method ◽  
The Relationship

The concept of entrepreneurial orientation, which emerges with the development of strategic management, refers to entrepreneurship orientations of businesses. The businesses need resources in other words organizational slack in order to develop their entrepreneurial trends. The organizational slack consists of three slack type. These slack types are available slack, recoverable slack and potential slack. The purpose of this study is to examine whether organizational slack in the businesses has an effect on entrepreneurial orientation. The relationship between organizational slack and entrepreneurial orientation was investigated through 20 companies that were traded in Borsa Istanbul Corporate Governance Index for 2010-2014 period using panel data analysis method. The results of the study indicate the existence of a statistically significant relationship between and the available slack and the recoverable slack with the entrepreneurial orientation in the businesses. According to findings; there was no statistically significant relationship between potential slack and entrepreneurial orientation.

PENGARUH KUALITAS PRODUK DAN KUALITAS PELAYANAN TERHADAP PENINGKATAN KEPUASAN DAN LOYALITAS PELANGGAN PERUSAHAAN DAERAH AIR MINUM (PDAM) KOTA MAKASSAR

2019 ◽  
Vol 3 (2) ◽  
pp. 228-244 ◽  
Author(s):  
Muhammad Rezha Pahlawan ◽  
Nurlia Nurlia ◽  
Abdul Rahman Laba ◽  
Erlina Pakki ◽  
Hardiyono Hardiyono
Keyword(s):  
Customer Satisfaction ◽  
Service Quality ◽  
Product Quality ◽  
Customer Loyalty ◽  
Indirect Effects ◽  
Analysis Method ◽  
Water Company ◽  
The Relationship ◽  
Intervening Variables ◽  
Customer Satisfaction And Loyalty

This study aims to determine the effect of Product Quality and Service Quality on Increasing Customer Satisfaction and Loyalty in Makassar Municipal Water Company (PDAM) both directly and through intervening variables or indirect effects. This study uses a quantitative approach conducted with the aim to explain the position of the variables studied and the relationship between one variable with another variable. This research will explain the causal relationship between variables through hypothesis testing. In this study, the analysis method used is path analysis using the SmartPLS program. The results of this study found that directly the product quality had a positive and significant effect on customer satisfaction, service quality had a positive and significant effect on customer satisfaction, product quality had a positive and significant effect on customer loyalty, service quality had a positive and not significant effect on customer loyalty, customer satisfaction positive and significant effect on customer loyalty. The indirect effect of this research is product quality has a positive and significant effect on customer loyalty if mediated by customer satisfaction. Service quality also has a positive and significant effect on customer loyalty if mediated by customer satisfaction.

Sign in / Sign up

Export Citation Format

Share Document