Design and Optimization of Two-Dimensional Laser Source Used for Projection

2013 ◽  
Vol 40 (10) ◽  
pp. 1016001
Author(s):  
张运方 Zhang Yunfang ◽  
李慧 Li Hui ◽  
董辉 Dong Hui ◽  
孔庆善 Kong Qingshan ◽  
施安存 Shi Ancun ◽  
...  
2006 ◽  
Vol 18 (S1) ◽  
pp. 316-322
Author(s):  
Ching-Yeh Hsin ◽  
Jia-Lin Wu ◽  
Sheng-Fong Chang

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 1557-1577 ◽  
Author(s):  
Xianguang Yang ◽  
Baojun Li

AbstractTransition metal dichalcogenides are two-dimensional semiconductors with strong in-plane covalent and weak out-of-plane interactions, resulting in exfoliation into monolayers with atomically thin thickness. This creates a new era for the exploration of two-dimensional physics and device applications. Among them, MoS2 is stable in air and easily available from molybdenite, showing tunable band-gaps in the visible and near-infrared waveband and strong light-matter interactions due to the planar exciton confinement effect. In the single-layer limit, monolayer MoS2 exhibits direct band-gaps and bound excitons, which are fundamentally intriguing for achieving the nanophotonic and optoelectronic applications. In this review, we start from the characterization of monolayer MoS2 in our group and understand the exciton modes, then explore thermal excitons and band renormalization in monolayer MoS2. For nanophotonic applications, the recent progress of nanoscale laser source, exciton-plasmon coupling, photoluminescence manipulation, and the MoS2 integration with nanowires or metasurfaces are overviewed. Because of the benefits brought by the unique electronic and mechanical properties, we also introduce the state of the art of the optoelectronic applications, including photoelectric memory, excitonic transistor, flexible photodetector, and solar cell. The critical applications focused on in this review indicate that MoS2 is a promising material for nanophotonics and optoelectronics.


Proceedings ◽  
2019 ◽  
Vol 27 (1) ◽  
pp. 25
Author(s):  
Lorenzo Palombi ◽  
Gabriele Inglese ◽  
Valentina Raimondi ◽  
Roberto Olmi

Laser-induced thermography is a an active technique using a laser source to heat a very small area on a side of a crack in a building material. The presence of a crack is easily detected as a sharp change in the temperature due to its insulating nature, but no information about its depth is directly available from the thermal image. The method described in this paper uses a heuristic form of the temperature on the surface of the heated specimen, which is transformed to a two-dimensional distribution. Then, a relation is used (called β -tool) between the thermal gap across the crack and the unknown depth of the damage. The purpose is that of making it possible to distinguish between shallow and deep fractures (more than 15mm deep).


2012 ◽  
Vol 232 ◽  
pp. 635-638
Author(s):  
Jin Hua Zhang

Granularity is the main parameter of evaluating materials, from the analysis of powder producing system that made of vibration mill, the material’s size can be controlled through controlling the speed of motor. Focus on the complex nonlinear in the processing of ground breaking, the two dimensional controller is designed. Due to the subjectivity and randomness in the designing method of classic fuzzy controller, so genetic algorithm is used to put fuzzy controller some learning function in order to obtain better control effect of the system.


1998 ◽  
Author(s):  
Eric Besnard ◽  
Adeline Schmitz ◽  
Edwan Boscher ◽  
Nicolas Garcia ◽  
Tuncer Cebeci

2013 ◽  
Vol 9 (12) ◽  
pp. 995-1000 ◽  
Author(s):  
Qingshan Kong ◽  
Youwan Tong ◽  
Hui Dong ◽  
Qing Fang ◽  
Yan Zhou ◽  
...  

2014 ◽  
Vol 43 (12) ◽  
pp. 1223002
Author(s):  
王晨歌 WANG Chen-ge ◽  
张彩妮 ZHANG Cai-ni ◽  
陈侃 CHEN Kan ◽  
黄腾超 HUANG Teng-chao ◽  
舒晓武 SHU xiao-wu ◽  
...  

2018 ◽  
Vol 8 (11) ◽  
pp. 2283 ◽  
Author(s):  
Xinghui Li ◽  
Haiou Lu ◽  
Qian Zhou ◽  
Guanhao Wu ◽  
Kai Ni ◽  
...  

In this paper, an orthogonal type two-axis Lloyd’s mirror interference lithography technique was employed to fabricate two-dimensional planar scale gratings for surface encoder application. The two-axis Lloyd’s mirror interferometer is composed of a substrate and two reflective mirrors (X- and Y-mirrors), which are placed edge by edge perpendicularly. An expanded and collimated beam was divided into three beams by this interferometer, a direct beam and two reflected beams, projected onto the substrate, X- and Y-mirrors, respectively. The unexpected beam sections having twice reflected off the mirrors were blocked by a filter. The remaining two reflected beams interfered with the direct beam on the substrate, generating perpendicularly cross patterns thus forming two-dimensional scale gratings. However, the two reflected beams undesirably interfere with each other and generate a grating pattern along 45-degree direction against the two orthogonal direction, which influence the pattern uniformity. Though an undesired grating pattern can be eliminated by polarization modulation with introduction of waveplates, spatial configuration of waveplates inevitably downsized the eventual grating, which is a key parameter for grating interferometry application. For solving this problem, theoretical and experimental study was carefully carried out to evaluate the fabrication quality with and without polarization modulation. Two-dimensional scale gratings with a 1 μm period in X- and Y-directions were achieved by using the constructed experiment system with a 442 nm He-Cd laser source. Atomic force microscopy (AFM) images and the result of diffraction performances demonstrated that the orthogonal type two-axis Lloyd’s mirror interferometer can stand a small order undesired interference, that is, a degree of orthogonality between two reflected beams, denoted by γ, no larger than a nominal value of 0.1.


Sign in / Sign up

Export Citation Format

Share Document