scholarly journals Stars Crushed by Black Holes. I. On the Energy Distribution of Stellar Debris in Tidal Disruption Events

2021 ◽  
Vol 923 (2) ◽  
pp. 184
Author(s):  
S. M. J. Norman ◽  
C. J. Nixon ◽  
Eric R. Coughlin

Abstract The distribution of orbital energies imparted into stellar debris following the close encounter of a star with a supermassive black hole is the principal factor in determining the rate of return of debris to the black hole, and thus in determining the properties of the resulting lightcurves from such events. We present simulations of tidal disruption events for a range of β ≡ r t/r p where r p is the pericenter distance and r t the tidal radius. We perform these simulations at different spatial resolutions to determine the numerical convergence of our models. We compare simulations in which the heating due to shocks is included or excluded from the dynamics. For β ≲ 8, the simulation results are well-converged at sufficiently moderate-to-high spatial resolution, while for β ≳ 8, the breadth of the energy distribution can be grossly exaggerated by insufficient spatial resolution. We find that shock heating plays a non-negligible role only for β ≳ 4, and that typically the effect of shock heating is mild. We show that self-gravity can modify the energy distribution over time after the debris has receded to large distances for all β. Primarily, our results show that across a range of impact parameters, while the shape of the energy distribution varies with β, the width of the energy spread imparted to the bulk of the debris is closely matched to the canonical spread, Δ E = GM • R ⋆ / r t 2 , for the range of β we have simulated.

1968 ◽  
Vol 23 (5) ◽  
pp. 752-756
Author(s):  
H. Klingenberg ◽  
A. Siddiqui

The practicability of a method using two wires as transmission line for microwaves as a diagnostic method on a shock tube was investigated. The energy distribution around the wires was calculated which showed a high spatial resolution independent of the frequency for this method. The wires cause bow shocks because the flow is hypersonic which should be taken into account. The geometrical dimensions happen to be the same as those in a probe method used by HOBSON, hence the disadvantages are comparable.


2019 ◽  
Vol 28 (14) ◽  
pp. 1944015
Author(s):  
Martina Toscani ◽  
Giuseppe Lodato ◽  
Elena Maria Rossi

Stars are spheres of gas held together by self-gravity. When flying by a black hole, however, the star self-binding force can be overwhelmed by the black hole tides and the star can be torn apart. This is a physically rich and fascinating event which will be described by first introducing the concept of black hole from a mathematical point of view. We will then dive into the physics of the tidal disruption and proceed describing the accompanying electromagnetic flare and gravitational wave burst in the frequency range of the Laser Interferometer Space Antenna. This empowers such events to discover the elusive black holes with mass intermediate between the solar and the million/billion solar masses.


2020 ◽  
Vol 495 (1) ◽  
pp. 1227-1238
Author(s):  
Andrea Sacchi ◽  
Giuseppe Lodato ◽  
Claudia Toci ◽  
Valentina Motta

ABSTRACT A tidal disruption event (TDE) occurs when a star passes too close to a supermassive black hole and gets torn apart by its gravitational tidal field. After the disruption, the stellar debris form an expanding gaseous stream. The morphology and evolution of this stream are particularly interesting as it ultimately determines the observational properties of the event itself. In this work, we perform 3D hydrodynamical simulations of the TDE of a star modelled as a polytropic sphere of index γ = 5/3 and study the gravitational stability of the resulting gas stream. We provide an analytical solution for the evolution of the stream in the bound, unbound, and marginally bound cases, which allows us to describe the stream properties and analyse the time-scales of the physical processes involved, applying a formalism developed in star formation context. Our results are that, when fragmentation occurs, it is fuelled by the failure of pressure in supporting the gas against its self-gravity. We also show that a stability criterion that includes also the stream gas pressure proves to be far more accurate than one that only considers the black hole tidal forces, giving analytical predictions of the time evolution of the various forces associated with the stream. Our results point out that fragmentation occurs on time-scales longer compared with the observational windows of these events and is thus not expected to give rise to significant observational features.


2014 ◽  
Vol 602-605 ◽  
pp. 3384-3387
Author(s):  
Ting Ting Li

With the rapid development of DOA (direction-of-arrival) estimation methods, the existing beamforming technologies still have the problem of a way to balance high spatial resolution and robust performance. The aperture extension characteristics of fourth-order cumulants is used to raise the spatial resolution of the array in this paper. By using the structure of minimum redundancy array, the calculation of the fourth-order cumulants matrix can be reduced. Simulations of the properties of fourth–order cumulants beamforming method are analyzed in this paper, including the resolution analysis, multi-sources analysis and error analysis. Simulation results show that the fourth-order cumulants beamforming method has a higher spatial resolution than the conventional beamforming method without increasing the number of the array sensors.


2012 ◽  
Vol 8 (S290) ◽  
pp. 329-330
Author(s):  
J. f. Wang

AbstractWe examine the innermost 100 parsec scale region of the Seyfert 2 galaxy NGC 1068 using a high spatial resolution X-ray image obtained with the Chandra X-ray Observatory, which allows comparison between X-ray emission clumps, optical narrow line ([OIII]) clouds and sub-arcsecond scale radio jet. Based on the combined X-ray, [OIII], and radio continuum morphology, we identify the locations of intense radio jet-cloud interaction. The [OIII] to soft X-ray ratios show that some of these clouds are strongly affected by shock heating. We estimate that the kinematic luminosity of the jet-driven shocks is 6 × 1038 erg s−1.


2020 ◽  
Vol 501 (2) ◽  
pp. 1748-1754
Author(s):  
Alexandra Spaulding ◽  
Philip Chang

ABSTRACT Stars that pass too close to a supermassive black hole are disrupted by the black hole’s tidal gravity. Some debris is ejected while the remainder accretes into the black hole. To better study the physics of these debris, we use the moving mesh code manga to follow the evolution of the star from its initial encounter to its complete destruction. By varying the impact parameter (β) of the star, we study the energy distribution of the remaining material and the fallback rate of the material into the black hole as a function of time. We show that the spread of energy in the debris and peak luminosity time (tpeak) are both directly related to the impact parameter. In particular, we find a β1/2 scaling for the energy spread for β = 2 − 10 that levels off at β ≳ 10. We discuss implication of this scaling for the rise time of the light curve and broadness of the luminosity peak for these lower β’s. These relationships provide a possible means of inferring the impact parameters for observed tidal disruption events.


2022 ◽  
Vol 924 (1) ◽  
pp. 34
Author(s):  
M. Cufari ◽  
Eric R. Coughlin ◽  
C. J. Nixon

Abstract Upon entering the tidal sphere of a supermassive black hole, a star is ripped apart by tides and transformed into a stream of debris. The ultimate fate of that debris, and the properties of the bright flare that is produced and observed, depends on a number of parameters, including the energy of the center of mass of the original star. Here we present the results of a set of smoothed particle hydrodynamics simulations in which a 1M ⊙, γ = 5/3 polytrope is disrupted by a 106 M ⊙ supermassive black hole. Each simulation has a pericenter distance of r p = r t (i.e., β ≡ r t/r p = 1 with r t the tidal radius), and we vary the eccentricity e of the stellar orbit from e = 0.8 up to e = 1.20 and study the nature of the fallback of debris onto the black hole and the long-term fate of the unbound material. For simulations with eccentricities e ≲ 0.98, the fallback curve has a distinct, three-peak structure that is induced by self-gravity. For simulations with eccentricities e ≳ 1.06, the core of the disrupted star reforms following its initial disruption. Our results have implications for, e.g., tidal disruption events produced by supermassive black hole binaries.


Author(s):  
K. Przybylski ◽  
A. J. Garratt-Reed ◽  
G. J. Yurek

The addition of so-called “reactive” elements such as yttrium to alloys is known to enhance the protective nature of Cr2O3 or Al2O3 scales. However, the mechanism by which this enhancement is achieved remains unclear. An A.E.M. study has been performed of scales grown at 1000°C for 25 hr. in pure O2 on Co-45%Cr implanted at 70 keV with 2x1016 atoms/cm2 of yttrium. In the unoxidized alloys it was calculated that the maximum concentration of Y was 13.9 wt% at a depth of about 17 nm. SIMS results showed that in the scale the yttrium remained near the outer surface.


Author(s):  
E. G. Rightor

Core edge spectroscopy methods are versatile tools for investigating a wide variety of materials. They can be used to probe the electronic states of materials in bulk solids, on surfaces, or in the gas phase. This family of methods involves promoting an inner shell (core) electron to an excited state and recording either the primary excitation or secondary decay of the excited state. The techniques are complimentary and have different strengths and limitations for studying challenging aspects of materials. The need to identify components in polymers or polymer blends at high spatial resolution has driven development, application, and integration of results from several of these methods.


Sign in / Sign up

Export Citation Format

Share Document