scholarly journals Hydrothermal Crystal Growth Rate of Goethite and Haematite from Amorphous Iron(III) Hydroxide Investigated by X-Ray Diffraction and Neutron Diffraction.

1980 ◽  
Vol 34a ◽  
pp. 771-776 ◽  
Author(s):  
A. Nørlund Christensen ◽  
P. Convert ◽  
M. S. Lehmann ◽  
Grethe Neerland ◽  
V. P. Spiridonov ◽  
...  
1997 ◽  
Vol 30 (5) ◽  
pp. 675-679 ◽  
Author(s):  
P. P. E. A. de Moor ◽  
T. P. M. Beelen ◽  
R. A. van Santen

The correlation between the formation of colloidal aggregates and the crystallization of silicalite-1 from a clear solution has been investigated with in situ combined small-angle X-ray scattering and wide-angle X-ray scattering, and in situ ultra-small-angle X-ray scattering using synchrotron radiation. Increasing the aging time at room temperature of the synthesis mixture prior to heating to the reaction temperature reduced the induction period and increased the crystal growth rate without affecting the formation of colloidal aggregates. Dilution of the synthesis mixtures did not influence the nucleation and crystal growth rate, and did not affect the formation of colloidal aggregates.


2000 ◽  
Vol 338-342 ◽  
pp. 75-78 ◽  
Author(s):  
Naoki Oyanagi ◽  
Shin Ichi Nishizawa ◽  
Tomohisa Kato ◽  
Hirotaka Yamaguchi ◽  
Kazuo Arai

2011 ◽  
Vol 415-417 ◽  
pp. 1979-1982
Author(s):  
Zhi Ping Zheng ◽  
Jing Wang ◽  
Lin Quan ◽  
Shu Ping Gong ◽  
Dong Xiang Zhou

Electro Dynamic Gradient (EDG) method was utilized for TlBr crystal growth in this paper. The influence of crystal growth conditions such as temperature gradient and growth rate on optical and electrical properties of grown TlBr crystals was investigated. The quality of TlBr crystals was characterized by infrared (IR) transmittance spectrum, X-ray diffraction, and I-V measurements.


Author(s):  
M. D. Vaudin ◽  
J. P. Cline

The study of preferred crystallographic orientation (texture) in ceramics is assuming greater importance as their anisotropic crystal properties are being used to advantage in an increasing number of applications. The quantification of texture by a reliable and rapid method is required. Analysis of backscattered electron Kikuchi patterns (BEKPs) can be used to provide the crystallographic orientation of as many grains as time and resources allow. The technique is relatively slow, particularly for noncubic materials, but the data are more accurate than any comparable technique when a sufficient number of grains are analyzed. Thus, BEKP is well-suited as a verification method for data obtained in faster ways, such as x-ray or neutron diffraction. We have compared texture data obtained using BEKP, x-ray diffraction and neutron diffraction. Alumina specimens displaying differing levels of axisymmetric (0001) texture normal to the specimen surface were investigated.BEKP patterns were obtained from about a hundred grains selected at random in each specimen.


1987 ◽  
Vol 48 (C1) ◽  
pp. C1-661-C1-662 ◽  
Author(s):  
J. R. PETIT ◽  
P. DUVAL ◽  
C. LORIUS

1990 ◽  
Vol 55 (7) ◽  
pp. 1691-1707 ◽  
Author(s):  
Miloslav Karel ◽  
Jiří Hostomský ◽  
Jaroslav Nývlt ◽  
Axel König

Crystal growth rates of copper sulphate pentahydrate (CuSO4.5 H2O) determined by different authors and methods are compared. The methods included in this comparison are: (i) Measurement on a fixed crystal suspended in a streaming solution, (ii) measurement on a rotating disc, (iii) measurement in a fluidized bed, (iv) measurement in an agitated suspension. The comparison involves critical estimation of the supersaturation used in measurements, of shape factors used for data treatment and a correction for the effect of temperature. Conclusions are drawn for the choice of values to be specified when data of crystal growth rate measurements are published.


2020 ◽  
Vol 18 (1) ◽  
pp. 951-961
Author(s):  
Qiuju Chen ◽  
Tao Hui ◽  
Hongjuan Sun ◽  
Tongjiang Peng ◽  
Wenjin Ding

AbstractVarious morphologies of magnesium carbonate hydrate had been synthesized without using any organic additives by carefully adjusting the reaction temperature and time during the talc carbonation process. At lower temperatures, magnesium carbonate hydrate was prone to display needle-like morphology. With the further increase of the carbonation temperature, the sheet-like crystallites became the preferred morphology, and at higher aging temperatures, these crystallites tended to assemble into layer-like structures with diverse morphologies, such as rose-like particles and nest-like structure. The reaction time had no effect on the crystal morphology, but it affected the particle size and situation of the crystal growth. X-Ray diffraction results showed that these various morphologies were closely related to their crystal structure and compositions. The needle-like magnesium carbonate hydrate had a formula of MgCO3·3H2O, whereas with the morphological transformation from needle-like to sheet-like, rose-like, and nest-like structure, their corresponding compositions also changed from MgCO3·3H2O to 4MgCO3·Mg(OH)2·8H2O, 4MgCO3·Mg(OH)2·5H2O, and 4MgCO3·Mg(OH)2·4H2O.


Sign in / Sign up

Export Citation Format

Share Document