Texture measurements in Al2O3 using BEKP

1994 ◽  
Vol 52 ◽  
pp. 608-609
Author(s):  
M. D. Vaudin ◽  
J. P. Cline
Keyword(s):  
Neutron Diffraction ◽  
Rapid Method ◽  
Crystallographic Orientation ◽  
Specimen Surface ◽  
X Ray Diffraction ◽  
Anisotropic Crystal ◽  
X Ray ◽  
Verification Method ◽  
Crystal Properties ◽  
Backscattered Electron

The study of preferred crystallographic orientation (texture) in ceramics is assuming greater importance as their anisotropic crystal properties are being used to advantage in an increasing number of applications. The quantification of texture by a reliable and rapid method is required. Analysis of backscattered electron Kikuchi patterns (BEKPs) can be used to provide the crystallographic orientation of as many grains as time and resources allow. The technique is relatively slow, particularly for noncubic materials, but the data are more accurate than any comparable technique when a sufficient number of grains are analyzed. Thus, BEKP is well-suited as a verification method for data obtained in faster ways, such as x-ray or neutron diffraction. We have compared texture data obtained using BEKP, x-ray diffraction and neutron diffraction. Alumina specimens displaying differing levels of axisymmetric (0001) texture normal to the specimen surface were investigated.BEKP patterns were obtained from about a hundred grains selected at random in each specimen.

X-ray microprobe for materials science

1994 ◽  
Vol 52 ◽  
pp. 56-57
Author(s):  
G.E. Ice
Keyword(s):  
Crystallographic Orientation ◽  
Local Structure ◽  
Materials Science ◽  
Chemical Information ◽  
X Ray Diffraction ◽  
Ray Optics ◽  
X Ray ◽  
Novel Materials ◽  
New Information ◽  
Elemental Sensitivity

The increasing availability of synchrotron x-ray sources has stimulated the development of advanced hard x-ray (E≥5 keV) microprobes. With new x-ray optics these microprobes can achieve micron and submicron spatial resolutions. The inherent elemental and crystallographic sensitivity of an x-ray microprobe and its inherently nondestructive and penetrating nature will have important applications to materials science. For example, x-ray fluorescent microanalysis of materials can reveal elemental distributions with greater sensitivity than alternative nondestructive probes. In materials, segregation and nonuniform distributions are the rule rather than the exception. Common interfaces to whichsegregation occurs are surfaces, grain and precipitate boundaries, dislocations, and surfaces formed by defects such as vacancy and interstitial configurations. In addition to chemical information, an x-ray diffraction microprobe can reveal the local structure of a material by detecting its phase, crystallographic orientation and strain.Demonstration experiments have already exploited the penetrating nature of an x-ray microprobe and its inherent elemental sensitivity to provide new information about elemental distributions in novel materials.

Investigation of Residual Strains of the Second Kind in Plastically Deformed Metallic Materials

1994 ◽  
Vol 376 ◽  
Author(s):  
M. Vrána ◽  
P. Klimanek ◽  
T. Kschidock ◽  
P. Lukáš ◽  
P. Mikula
Keyword(s):  
High Resolution ◽  
Neutron Diffraction ◽  
Stacking Faults ◽  
Metallic Materials ◽  
Line Broadening ◽  
X Ray Diffraction ◽  
X Ray ◽  
Neutron Diffractometer ◽  
Residual Strains ◽  
Good Agreement

ABSTRACTInvestigation of strongly distorted crystal structures caused by dislocations, stacking-faults etc. in both plastically deformed f.c.c. and b.c.c. metallic materials was performed by the analysis of the neutron diffraction line broadening. Measurements were realized by means of the high resolution triple-axis neutron diffractometer equipped by bent Si perfect crystals as monochromator and analyzer at the NPI Řež. The substructure parameters obtained in this manner are in good agreement with the results of X-ray diffraction analysis.

Investigation of Residual Stress/Strain and Texture in a Large Dissimilar Metal Weld Using Synchrotron Radiation and Neutrons

2013 ◽  
Vol 772 ◽  
pp. 193-199 ◽  
Author(s):  
Carsten Ohms ◽  
Rene V. Martins
Keyword(s):  
Synchrotron Radiation ◽  
Neutron Diffraction ◽  
Residual Stresses ◽  
Large Scale ◽  
High Energy ◽  
X Ray Diffraction ◽  
Butt Weld ◽  
X Ray ◽  
Component Size ◽  
Thin Slice

Bi-metallic piping welds are frequently used in light water nuclear reactors to connect ferritic steel pressure vessel nozzles to austenitic stainless steel primary cooling piping systems. An important aspect for the integrity of such welds is the presence of residual stresses. Measurement of these residual stresses presents a considerable challenge because of the component size and because of the material heterogeneity in the weld regions. The specimen investigated here was a thin slice cut from a full-scale bi-metallic piping weld mock-up. A similar mock-up had previously been investigated by neutron diffraction within a European research project called ADIMEW. However, at that time, due to the wall thickness of the pipe, stress and spatial resolution of the measurements were severely restricted. One aim of the present investigations by high energy synchrotron radiation and neutrons used on this thin slice was to determine whether such measurements would render a valid representation of the axial strains and stresses in the uncut large-scale structure. The advantage of the small specimen was, apart from the easier manipulation, the fact that measurement times facilitated a high density of measurements across large parts of the test piece in a reasonable time. Furthermore, the recording of complete diffraction patterns within the accessible diffraction angle range by synchrotron X-ray diffraction permitted mapping the texture variations. The strain and stress results obtained are presented and compared for the neutron and synchrotron X-ray diffraction measurements. A strong variation of the texture pole orientations is observed in the weld regions which could be attributed to individual weld torch passes. The effect of specimen rocking on the scatter of the diffraction data in the butt weld region is assessed during the neutron diffraction measurements.

Exploring the 3D Structure and Defects of a Self-Assembled Gold Mesocrystal by Coherent X-ray Diffraction Imaging

Nanoscale ◽  
2021 ◽  
Author(s):  
Jerome Carnis ◽  
Felizitas Kirner ◽  
Dmitry Lapkin ◽  
Sebastian Sturm ◽  
Young Yong Kim ◽  
...  
Keyword(s):  
Nanostructured Materials ◽  
Crystallographic Orientation ◽  
3D Structure ◽  
Structural Heterogeneity ◽  
X Ray Diffraction ◽  
Length Scales ◽  
X Ray ◽  
Diffraction Imaging ◽  
Self Assembled

Mesocrystals are nanostructured materials consisting of individual nanocrystals having a preferred crystallographic orientation. On mesoscopic length scales, the properties of mesocrystals are strongly affected by structural heterogeneity. Here, we report...

scholarly journals Accurate H-atom parameters for the two polymorphs of L-histidine at 5, 105 and 295 K

2021 ◽  
Vol 77 (5) ◽  
pp. 785-800
Author(s):  
Giulia Novelli ◽  
Charles J. McMonagle ◽  
Florian Kleemiss ◽  
Michael Probert ◽  
Horst Puschmann ◽  
...  
Keyword(s):  
Neutron Diffraction ◽  
Single Crystal ◽  
Diffraction Data ◽  
Crystal Packing ◽  
Basis Sets ◽  
X Ray Diffraction ◽  
X Ray ◽  
Refinement Method ◽  
Primary Amino ◽  
Precision And Accuracy

The crystal structure of the monoclinic polymorph of the primary amino acid L-histidine has been determined for the first time by single-crystal neutron diffraction, while that of the orthorhombic polymorph has been reinvestigated with an untwinned crystal, improving the experimental precision and accuracy. For each polymorph, neutron diffraction data were collected at 5, 105 and 295 K. Single-crystal X-ray diffraction experiments were also performed at the same temperatures. The two polymorphs, whose crystal packing is interpreted by intermolecular interaction energies calculated using the Pixel method, show differences in the energy and geometry of the hydrogen bond formed along the c direction. Taking advantage of the X-ray diffraction data collected at 5 K, the precision and accuracy of the new Hirshfeld atom refinement method implemented in NoSpherA2 were probed choosing various settings of the functionals and basis sets, together with the use of explicit clusters of molecules and enhanced rigid-body restraints for H atoms. Equivalent atomic coordinates and anisotropic displacement parameters were compared and found to agree well with those obtained from the corresponding neutron structural models.

scholarly journals Influence of pretreatment on the properties of α-Fe2O3 and the effect on photocatalytic degradation of methylene blue under visible light

2020 ◽  
Vol 82 (11) ◽  
pp. 2415-2424
Author(s):  
S. Mokhtari ◽  
N. Dokhan ◽  
S. Omeiri ◽  
B. Berkane ◽  
M. Trari
Keyword(s):  
Methylene Blue ◽  
Average Crystallite Size ◽  
Sample Surface ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Lattice Constants ◽  
Electrochemical Pretreatment ◽  
Crystal Properties ◽  
Rhombohedral Symmetry

Abstract The hematite (α-Fe2O3) nanostructures were synthesized by thermal oxidation of metal at 500 °C under atmospheric pressure. We studied the effect of the electrochemical pretreatment of the substrate before calcinations and its impact on the morphology, crystalline structure, lattice microstructural, and optical properties of α-Fe2O3. Uniform nanosheets were observed on the sample surface after calcination; their dimension and morphology were accentuated by the pretreatment, as confirmed by the SEM images. The characteristics of the nanostructures, analyzed by X-ray diffraction (XRD), revealed a rhombohedral symmetry with the space group R-3c and lattice constants: a = 0.5034 nm and c = 1.375 nm. The average crystallite size and strain, determined from the Williamson-Hall (W-H) plot, showed substantial variations after the substrate pretreatment. The Raman spectroscopy confirmed the changes in the crystal properties of the hematite submitted to pretreatment. The diffuse reflectance allowed to evaluate the optical gap which lies between 1.2 and 1.97 eV, induced by the electrochemical processing. The photocatalytic activity of α-Fe2O3 films was assessed by the degradation of methylene blue (MB) under LED light; 15% enhancement of the degradation for the pretreated specimens was noticed.

The structure of oxide glasses studied by high-energy x-ray diffraction

2020 ◽  
Vol 61 (6) ◽  
pp. 233-238
Author(s):  
S. Kohara ◽  
◽  
N. Umesaki ◽  
H. Ohno ◽  
K. Suzuya ◽  
...  
Keyword(s):  
Neutron Diffraction ◽  
Structural Information ◽  
Structural Models ◽  
High Energy ◽  
Reverse Monte Carlo ◽  
Oxide Glasses ◽  
Neutron Diffraction Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
Approaches To Study

The use of high‑energy x‑ray diffraction techniques with the latest generation synchrotron sources has created new approaches to study quantitatively the structure of noncrystalline materials. Recently, this technique has been combined with neutron diffraction at pulsed source to provide more detailed and reliable structural information not previously available. This article reviews and summarises recent results obtained from the high energy x‑ray diffraction on several oxide glasses, SiO2, B2O3 and PbSiO3, using bending magnet beamlines at SPring‑8. In particular, it addresses the structural models of the oxide glasses obtained by the reverse Monte Carlo (RMC) modelling technique using both the high energy x‑ray and neutron diffraction data.

Sign in / Sign up

Export Citation Format

Share Document