scholarly journals Drying Behavior and Drying Promotion Effects of Inorganic Sludge with a Resin Type Drying Accelerator

Author(s):  
Nobusuke Kobayashi ◽  
Yuma Tachibana ◽  
Kenji Kamiya ◽  
Yoshinori Itaya ◽  
Akira Suami ◽  
...  
Keyword(s):  
Author(s):  
Adugna Mosissa Bikila ◽  
Yetenayet Bekele Tola ◽  
Tarekegn Berhanu Esho ◽  
Sirawdink Fikreyesus Forsido

Foods ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 147 ◽  
Author(s):  
Saheeda Mujaffar ◽  
Sheena Ramsumair

Pumpkin seeds are a major agricultural waste from the fresh-cut produce industry. The objective of this study was to investigate the drying behavior of untreated, whole pumpkin seeds in a fluidized bed dryer at 50–80 °C (2.87 m/s), with a view to producing a high-quality pumpkin powder from dried seeds. Seeds were dried at 50–80 °C to an average equilibrium moisture value of 0.035 to 0.006 g H2O/g DM (3.4 to 0.6% wb). Drying occurred in the falling rate period only and drying rate constants ranged from 0.0226 to 0.0900 1/min with corresponding diffusivity values for the first falling-rate period ranging from 4.68 to 18.63 × 10−10 m2/s. The activation energy (Ea)—for the first falling rate period was determined to be 43.9 kJ/mol. Of the nineteen thin layer models tested, the Alibas model could be successfully used as a general model to predict the Moisture Ratio (MR) data for all temperatures investigated. After drying, seeds were blended to produce powders, which were found to be high in fat, crude protein and fiber.


2016 ◽  
Vol 49 (10) ◽  
pp. 4029-4048 ◽  
Author(s):  
H. Samouh ◽  
A. Soive ◽  
E. Rozière ◽  
A. Loukili

2018 ◽  
Vol 18 (2) ◽  
pp. 7-19 ◽  
Author(s):  
Maria Cláudia de Freitas Salomão ◽  
Elton Bauer ◽  
Claudio de Souza Kazmierczak

Abstract The objective of this article was to study the drying behavior of rendering mortars. Cement-lime mortars with different mix proportions were evaluatedto analyze the influence of mix materials on water transport. The experimental program was produced to observe the transport of liquid water and vapor water in mortars during the drying process. The liquid water transport was studied through capillary absorption and the water vapor transport by the water vapor permeability test. The drying curves used to investigate drying kinetics were obtained according to the methodology recommended by European standard EN 16322. In summary, it is possible to affirm that the aggregate, the binder and water contents determine the behavior of the mortars regarding water transport. The drying index is considered a good indicator of the easiness of both liquid and vapor water transport.


2018 ◽  
Vol 36 (16) ◽  
pp. 2022-2029 ◽  
Author(s):  
Baek Sung Park ◽  
Won-Gi Ahn ◽  
Kevin Injoe Jung ◽  
Seong Jae Lee ◽  
Kwan-Young Lee ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document