Preferred Orientation, Microstructures, and Porosity Analysis of Posidonia Shales

2012 ◽  
Author(s):  
F. Kets ◽  
W. Kanitpanyacharoen ◽  
H.R. Wenk ◽  
R. Wirth
Keyword(s):  
Preferred Orientation ◽  
Porosity Analysis

The Microstructure of Shock-Synthesized Diamond

1967 ◽  
Vol 25 ◽  
pp. 324-325
Author(s):  
Lucien F. Trueb
Keyword(s):  
Single Crystals ◽  
Preferred Orientation ◽  
High Magnification ◽  
Texture Pattern ◽  
Shock Process ◽  
New Type ◽  
Diffraction Diagram

A new type of synthetic industrial diamond formed by an explosive shock process has been recently developed by the Du Pont Company. This material consists of a mixture of two basically different forms, as shown in Figure 1: relatively flat and compact aggregates of acicular crystallites, and single crystals in the form of irregular polyhedra with straight edges.Figure 2 is a high magnification micrograph typical for the fibrous aggregates; it shows that they are composed of bundles of crystallites 0.05-0.3 μ long and 0.02 μ. wide. The selected area diffraction diagram (insert in Figure 2) consists of a weak polycrystalline ring pattern and a strong texture pattern with arc reflections. The latter results from crystals having preferred orientation, which shows that in a given particle most fibrils have a similar orientation.

Existence of Cubic ZrO2 at 300°C on Bulk Zirconium

1969 ◽  
Vol 27 ◽  
pp. 166-167
Author(s):  
R.A. Ploc
Keyword(s):  
Metal Oxide ◽  
Metal Substrate ◽  
Preferred Orientation ◽  
Monoclinic Zirconia ◽  
Epitaxial Relationship

The manner in which ZrO2 forms on zirconium at 300°C in air has been discussed in the first reference. In short, monoclinic zirconia nucleates and grows with a preferred orientation relative to the metal substrate. The mode of growth is not well understood since an epitaxial relationship which gives minimum misfit between the zirconium ions in the metal/oxide combination is not realized. The reason may be associated with a thin cubic or tetragonal layer of ZrO2 between the inner oxygen saturated metal and the outer monoclinic zirconia.

Preferred orientation of rolling-induced ε martensite in an Fe-Mn-Si alloy

2003 ◽  
Vol 112 ◽  
pp. 365-368 ◽  
Author(s):  
K. K. Jee ◽  
W. Y. Jang ◽  
Y. H. Chung
Keyword(s):  
Preferred Orientation ◽  
Ε Martensite

PLGA+HA/βTCP scaffold incorporating simvastatin: a promising biomaterial for bone tissue engineering

2020 ◽  
Author(s):  
Mariane Beatriz Sordi ◽  
Ariadne Cristiane Cabral da Cruz ◽  
Águedo Aragones ◽  
Mabel Mariela Rodríguez Cordeiro ◽  
Ricardo de Souza Magini
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Thermal Analyses ◽  
Chemical Properties ◽  
Biological Properties ◽  
Scanning Calorimetry ◽  
Evaporation Technique ◽  
Porosity Analysis ◽  
Biphasic Ceramic

The aim of this study was to synthesize, characterize, and evaluate degradation and biocompatibility of poly(lactic-co-glycolic acid) + hydroxyapatite / β-tricalcium phosphate (PLGA+HA/βTCP) scaffolds incorporating simvastatin (SIM) to verify if this biomaterial might be promising for bone tissue engineering. Samples were obtained by the solvent evaporation technique. Biphasic ceramic particles (70% HA, 30% βTCP) were added to PLGA in a ratio of 1:1. Samples with SIM received 1% (m:m) of this medication. Scaffolds were synthesized in a cylindric-shape and sterilized by ethylene oxide. For degradation analysis, samples were immersed in PBS at 37 °C under constant stirring for 7, 14, 21, and 28 days. Non-degraded samples were taken as reference. Mass variation, scanning electron microscopy, porosity analysis, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetry were performed to evaluate physico-chemical properties. Wettability and cytotoxicity tests were conducted to evaluate the biocompatibility. Microscopic images revealed the presence of macro, meso, and micropores in the polymer structure with HA/βTCP particles homogeneously dispersed. Chemical and thermal analyses presented very similar results for both PLGA+HA/βTCP and PLGA+HA/βTCP+SIM. The incorporation of simvastatin improved the hydrophilicity of scaffolds. Additionally, PLGA+HA/βTCP and PLGA+HA/βTCP+SIM scaffolds were biocompatible for osteoblasts and mesenchymal stem cells. In summary, PLGA+HA/βTCP scaffolds incorporating simvastatin presented adequate structural, chemical, thermal, and biological properties for bone tissue engineering.

Measurement of growth rates for single crystals and pressed tablets of CuSO4.5 H2O on a rotating disc

1989 ◽  
Vol 54 (11) ◽  
pp. 2951-2961 ◽  
Author(s):  
Miloslav Karel ◽  
Jaroslav Nývlt
Keyword(s):  
Growth Rate ◽  
Single Crystal ◽  
Single Crystals ◽  
Growth Rates ◽  
Diffusion Coefficients ◽  
Preferred Orientation ◽  
Rotating Disc ◽  
Dissolution Rates ◽  
Rates Of Growth ◽  
Good Agreement

Measured growth and dissolution rates of single crystals and tablets were used to calculate the overall linear rates of growth and dissolution of CuSO4.5 H2O crystals. The growth rate for the tablet is by 20% higher than that calculated for the single crystal. It has been concluded that this difference is due to a preferred orientation of crystal faces on the tablet surface. Calculated diffusion coefficients and thicknesses of the diffusion and hydrodynamic layers in the vicinity of the growing or dissolving crystal are in good agreement with published values.

Titanohematite lattice-preferred orientation and magnetic anisotropy in high-temperature mylonites

2002 ◽  
Vol 198 (1-2) ◽  
pp. 77-92 ◽  
Author(s):  
Jérôme Bascou ◽  
M.Irene B. Raposo ◽  
Alain Vauchez ◽  
Marcos Egydio-Silva
Keyword(s):  
High Temperature ◽  
Magnetic Anisotropy ◽  
Preferred Orientation ◽  
Lattice Preferred Orientation

Phase transformation and preferred orientation in carboxylate derived ZrO2 thin films on silicon substates

1992 ◽  
Vol 7 (11) ◽  
pp. 3065-3071 ◽  
Author(s):  
Peir-Yung Chu ◽  
Isabelle Campion ◽  
Relva C. Buchanan
Keyword(s):  
Thin Films ◽  
Heat Treatment ◽  
Phase Transformation ◽  
Heating Rate ◽  
Tetragonal Phase ◽  
Monoclinic Phase ◽  
Preferred Orientation ◽  
Si Substrate ◽  
Interfacial Diffusion ◽  
Deposited Films

Phase transformation and preferred orientation in ZrO2 thin films, deposited on Si(111) and Si(100) substrates, and prepared by heat treatment from carboxylate solution precursors were investigated. The deposited films were amorphous below 450 °C, transforming gradually to the tetragonal and monoclinic phases on heating. The monoclinic phase developed from the tetragonal phase displacively, and exhibited a strong (111) preferred orientation at temperature as low as 550 °C. The degree of preferred orientation and the tetragonal-to-monoclinic phase transformation were controlled by heating rate, soak temperature, and time. Interfacial diffusion into the film from the Si substrate was negligible at 700 °C and became significant only at 900 °C, but for films thicker than 0.5 μm, overall preferred orientation exceeded 90%.

Sign in / Sign up

Export Citation Format

Share Document