Conditioning Spectral Simulation Method By Horizontal Well Data

Author(s):  
N.S. Ismagilov ◽  
M.A. Lifshits
2014 ◽  
Vol 962-965 ◽  
pp. 489-493
Author(s):  
Zhi Qiang Li ◽  
Yong Quan Hu ◽  
Wen Jiang Xu ◽  
Jin Zhou Zhao ◽  
Jian Zhong Liu ◽  
...  

This article presents a new exploitation method based on the same fractured horizontal well with fractures for injection or production on offshore low permeability oilfields for the purpose of adapting to their practical situations and characteristics, which means fractures close to the toe of horizontal well used for injecting water and fractures near the heel of horizontal well used for producing oil. According to proposed development mode of fracturing, relevant physical model is established, Then reservoir numerical simulation method has been applied to study the effect of arrangement pattern of injection and production fractures, fracture conductivity, fracture length on oil production. Research indicates cumulative oil production is much higher by employing the middle fracture for injecting water compared with using the remote one, suggesting that the middle fracture adopted for injecting water, and hydraulic fracture length and conductivity have been optimized. The proposed development pattern of a staged fracturing for horizontal wells with some fractures applied for injecting water and others for production based on the same horizontal well provides new thoughts for offshore oilfields exploitation.


2020 ◽  
Vol 38 (6) ◽  
pp. 2217-2230
Author(s):  
Lijun Lin ◽  
Wei Lin ◽  
Shengchun Xiong ◽  
Zhengming Yang

Staged fracturing horizontal well technology is an important means of improving tight reservoir development efficiency. Taking a typical tight oil block in the Oilfield A as the studied area, the vertical well–horizontal well joint arrangement pattern is adopted in this study. The energy supplementary development effects of multiple permeability scales, different arrangement spacing, and different media (H2O, CO2) are discussed through the numerical simulation method. Combined with the principles of petroleum technology economics, the economic evaluation model for staged fracturing horizontal wells in tight oil reservoir development is proposed, thereby determining the technical boundary and economic boundary of supplementary energy development with different media. Studies indicate that the technical boundary and economic boundary of water-flooding development in the Oilfield A are 0.4 and 0.8 mD, respectively, and the technical boundary and economic boundary of CO2-flooding development are 0.1 and 0.4 mD, respectively. This study provides theoretical support for field operation of Oilfield A and guidance for selection of development mode for tight oil reservoirs.


Author(s):  
Minhui Qi ◽  
Mingzhong Li ◽  
Yanchao Li ◽  
Tiankui Guo ◽  
Song Gao

Hydraulic fracturing is an economically effective technology developing the glutenite reservoirs, which have far stronger heterogeneity than the conventional sandstone reservoir. According to the field production experience of Shengli Oilfield, horizontal-well fracturing is more likely to develop a complex fractured network, which improves the stimulated volume of reservoir effectively. But the clear mechanism of horizontal-well hydraulic fracture propagation in the glutenite reservoirs is still not obtained, thus it is difficult to effectively carry out the design of fracturing plan. Based on the characteristics of the glutenite reservoirs, a coupled Flow-Stress-Damage (FSD) model of hydraulic fracture propagation is established. The numerical simulation of fracturing expansion in the horizontal well of the glutenite reservoir is conducted. It is shown that a square mesh-like fracture network is developed near the horizontal well in the reservoir with lower stress difference, in which fracture is more prone to propagate along the direction of the minimum principal stress as well. High fracturing fluids injection displacement and high fracturing fluid viscosity lead to the rise of static pressure of the fracture, which results in the rise of fracture complexity, and greater probability to deflect when encountering gravels. As the perforation density increases, the micro-fractures generated at each perforation gather together faster, and the range of the stimulated reservoir is also relatively large. For reservoirs with high gravel content, the complexity of fracture network and the effect of fracture communication are obviously increased, and the range of fracture deflection is relatively large. In the case of the same gravel distribution, the higher the tensile strength of the gravel, the greater fracture tortuosity and diversion was observed. In this paper, a simulation method of horizontal well fracture network propagation in the reservoirs is introduced, and the result provides the theoretical support for fracture network morphology prediction and plan design of hydraulic fracturing in the glutenite reservoir.


2013 ◽  
Vol 785-786 ◽  
pp. 998-1004
Author(s):  
Song Wang ◽  
Xi Ran Guo ◽  
You Shi Jiang ◽  
Chang Yu Liu ◽  
Yong Ming Li ◽  
...  

Multi-stage horizontal well fracturing with several perforating clusters in each stage is an important completion technique in tight gas and shale gas reservoirs. Due to the stress field interference, different perforation parameters and unevenly distributed cluster distance lead to individual fracture pressure, which determines whether the clusters can all be initiated during the fracturing process. The ABAQUS software can be used to create the 3D finite element model of horizontal multi-stage fracturing with several clusters and to analyze the fracture pressure influenced by different parameter set of helix perforation, such as phase angle, tunnel diameter, tunnel depth and perforating density. Based on the results of perforation parameter analysis, the simulation method can be validated with actual treatment data from Jilin oil field.


Sign in / Sign up

Export Citation Format

Share Document