Basic Principles for Thermoplastic Parts Finishing With Impulse Thermal Energy Method

2022 ◽  
pp. 49-87
Author(s):  
Sergiy Plankovskyy ◽  
Olga Shypul ◽  
Yevgen Tsegelnyk ◽  
Dmytro Brega ◽  
Oleg Tryfonov ◽  
...  

Impulse thermal energy method (ITEM) as modification of the thermal energy method that is successfully used for finishing is considered for application to thermoplastics. The chapter focuses to highlight the basic principles of the thermoplastics treatment by acting heat fluxes inherent to ITEM providing the time-controlled production of combustion species. The properties of thermoplastics and the requirements for their treatment have the greatest impact on processing settings. Thus, the questions of the choice of the preferred fuel mixture, the type of its ignition, and combustion have been studied. By means of numerical situating, the processes of melting and healing of pores during processing are investigated. A method of defining processing settings has been developed, taking into account the limitations on critical temperatures. The promising possibilities of ITEM in relation to the processing of thermoplastics parts obtained by additive technologies are outlined.

Author(s):  
Sergiy Plankovskyy ◽  
Viktor Popov ◽  
Olga Shypul ◽  
Yevgen Tsegelnyk ◽  
Oleg Tryfonov ◽  
...  
Keyword(s):  

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4553
Author(s):  
Timur Valiullin ◽  
Ksenia Vershinina ◽  
Pavel Strizhak

This paper describes modern research methods of the ignition and combustion processes of slurry fuel droplets. The experiments were carried out using a muffle furnace to ensure the conditions of radiation heating, the hot surface to reproduce the conditions of conductive heating, the high-temperature channel with convective heating, the chamber with the processes of soaring, i.e., a significant increase in the time of fuel residence in the combustion chamber. We identified the differences in combustion modes, threshold ignition temperatures, delay times and durations of combustion processes. We obtained the quantitative differences in the characteristics of the ignition and combustion processes for typical registration methods. It was found that for all heating schemes, the minimum ignition temperatures have comparable values. Minimum ignition delay times were recorded during convective heating. The maximum combustion temperatures were achieved with radiation heating. We determined the values of limiting heat fluxes, sufficient to initiate the combustion of slurries fuels during conductive, convective and radiative heating.


Author(s):  
Kang Pan ◽  
James S. Wallace

This paper presents a numerical study on fuel injection, ignition and combustion in a direct-injection natural gas (DING) engine with ignition assisted by a shielded glow plug (GP). The shield geometry is investigated by employing different sizes of elliptical shield opening and changing the position of the shield opening. The results simulated by KIVA-3V indicated that fuel ignition and combustion is very sensitive to the relative angle between the fuel injection and the shield opening, and the use of an elliptical opening for the glow plug shield can reduce ignition delay by 0.1∼0.2ms for several specific combinations of the injection angle and shield opening size, compared to a circular shield opening. In addition, the numerical results also revealed that the natural gas ignition and flame propagation will be delayed by lowering a circular shield opening from the fuel jet center plane, due to the blocking effect of the shield to the fuel mixture, and hence it will reduce the DING performance by causing a longer ignition delay.


2021 ◽  
Vol 2021 ◽  
pp. 1-23
Author(s):  
Karpenko Vasily Nikolaevich ◽  
Yuriy Starodub ◽  
Andrii Havrys

In the article, investigation is given of the developed mathematical models of nonequilibrium in time and distributed in space thermodynamic state of Earth’s matter from its center to its surface depending on the cases of the presence and absence of an internal source of thermal energy concentrated in the center of mass taking into account known geophysical data about the nucleus, mantle, lithosphere and atmosphere, and endogenous and exogenous heat fluxes. The objects of research are as follows: mathematical models of geothermal energy of the Earth, its internal source, and heat balance of endogenous and exogenous heat fluxes on the Earth’s surface. Research methods used are as follows: thermometry in deep wells, ground and remote sensing of heat fluxes of the Earth and the planets of the Solar System, mathematical modeling of heat exchange and thermoelastic processes from compression of Earth’s matter by gravitational field energy information and classical physical and mathematical methods, and computer modeling. The aim of research: in computer modeling to provide new mathematical models that determine the geophysical parameters of geothermal energy, which are aimed on solving problems of energy, environmental and economic security of society, using modern technical means of calculating ground and remote sensing data development of geothermal resources, and regulation of the heat balance of the ecosystem, namely: (i) study of the geological structure of the lithosphere to a depth of 10 km by remote sensing to determine the physical parameters of its layers more accurately than ground methods; (ii) development of projects of geothermal power plants on the basis of single isolated wells of a given depth with a capacity of up to 2 ÷ 3 mW of electricity on continents of the globe; (iii) real-time monitoring and forecasting of the temperature field of the atmosphere according to its physical and chemical composition. The novelty of the obtained research results: (i) developed the mathematical model of the physical process of origin and distribution in the bowels of the density of geothermal energy of the Earth from the surface to its center, which is the density of internal energy of an elementary geological object, and which increases when approaching the center of the planet; (ii) developed the mathematical model of the thermal energy source of infrared (IR) waves of the elementary geophysical object of the Earth’s interior depending on the depth of its occurrence, which allows to determine the stable generation of geothermal energy by rocks in a deep well for extraction and conversion into electricity and to study the geological structure and physical properties of the Earth’s interior; (iii) the mathematical model of heat exchange between the layers of the Earth’s subsoil with the thermal energy of infrared waves according to the laws of Fourier thermal conductivity and Stefan–Boltzmann heat transfer, which together with the geothermal energy source model allows to determine a thermal capacity of rocks in a deep well; (iv) developed the mathematical model of stable action of a source of thermal energy in the center of mass of the Earth, in the absence of which it is hard to explain the power of its endogenous infrared heat flux, parameters of geothermal energy distribution in the Earth, and the current thermodynamic state of the atmosphere, and the change in temperature of which depends on the thermophysical parameters of the physical-chemical composition of the atmosphere more than on changes in the thermal activity of the Sun; (v) determination of new numerical values: thermophysical parameters of the Earth’s interior; kinetic, potential and own gravitational energy of the Earth and own gravitational energy of the planets of the Solar System.


2021 ◽  
Vol 6 (3(31)) ◽  
pp. 35-38
Author(s):  
Yuliya Aleksandrovna Mironova ◽  
Svetlana Aleksandrovna Dedeeva

This article presents the basic principles of pricing in the economy, examines the factors influencing the formation of tariffs in the energy sector. Using the example of the Sakmarskaya termal power stantion, the categories that determine the cost of finished products are distinguished. Measures are proposed that can reduce production costs and thereby reduce the cost of electric and thermal energy by about 1.5 times.


Author(s):  
Sergiy Plankovskyy ◽  
Olga Shypul ◽  
Yevgen Tsegelnyk ◽  
Alexander Pankratov ◽  
Tatiana Romanova

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Mar Alonso ◽  
Eleazar Padrón ◽  
Hirochika Sumino ◽  
Pedro A. Hernández ◽  
Gladys V. Melián ◽  
...  

During July 2016, the first integrated heat flow, CO2, and 3He emission survey was conducted across 0.5 km2 of the summit cone and crater of Teide volcano, Tenerife, Canary Islands, Spain. The thermal energy released from Teide summit cone by diffuse degassing was 2.2 MW, and the heat flux calculated through Dawson’s method was 8.1 MW, difference due to the comparison of purely convective areas as the crater with diffusive areas as the flanks of the volcano. Diffuse CO2 output was 211±20 t d-1, and 3He emission was estimated to be within a range between 0.35 and 0.89 mol y-1. The obtained values of diffuse degassing and heat fluxes are close to others obtained for similar volcanic areas. The calculation of 3He/heat ratio for the first time in this volcanic system supports the presence of an important mantle source for the degassing of Teide volcano.


Sign in / Sign up

Export Citation Format

Share Document