Effect of Mg Content in Matrix on Infiltration Height in Producing MgO/Al Composite by Vacuum Infiltration Method

Author(s):  
Recep Calin ◽  
Ramazan Citak
2007 ◽  
Vol 546-549 ◽  
pp. 611-614 ◽  
Author(s):  
Recep Calin ◽  
Ramazan Citak

Vacuum infiltration is one of the composite production method. Reinforcement volume ratio, vacuum value, molten matrix composition and temperature, infiltration atmosphere and time are important parameters in infiltration of molten metal into preformed reinforcement. In this study, MgO powder and Al were used as reinforcement and matrix respectively. Mixture of MgO and Al powders with –105 μm particle size were filled in quartz tubes freely to form 30 % reinforcement volume ratio. Liquid pure Al with varying Mg contents were vacuum infiltrated into the MgO powder under 550 mmHg vacuum at two different temperatures in normal atmosphere for 3 min. After vacuuming, infiltration height and density of produced composite have been determined. Fracture behavior of composites has also been determined by three point fracture test. Microstructure of composites and fracture surface were investigated by SEM analysis. It has been found that fracture strength of composites decreased although infiltration height and density increased with increasing Mg content of liquid Al. It has been also determined that molten metal temperature facilitates infiltration.


2013 ◽  
Vol 58 (2) ◽  
pp. 509-512 ◽  
Author(s):  
W. Chao ◽  
X. Xiangxin ◽  
C. Xiaozhou ◽  
Y. He ◽  
Ch. Gongjin

In this paper, we studied the effect of Ti addition on the microstructure and fracture toughness of Boron nitride- Aluminum (BN-Al) composite materials that were synthesized by vacuum infiltration. The BN-Al composite materials were fabricated by preheating the [Ti+BN] preforms at 1700º for 1 hour before Al alloys were infiltrated into the preforms in a vacuum atmosphere at 1100º for 2 hours. X-ray diffraction (XRD) patterns showed that the diffraction peaks of titanium diboride (TiB2) appeared when the [Ti+BN] preforms were preheated. It is thought that metal Al protected are visible and this could be achieved by the generation of TiB2 when Al infiltrated into the preform from fractography. The matching fracture toughness of the [Ti+BN] preforms gradually improve when Ti content was increased.


HortScience ◽  
2004 ◽  
Vol 39 (4) ◽  
pp. 865D-865
Author(s):  
Jennifer A. Ehrenberger* ◽  
Adelheid R. Kuehnle

A hybridization strategy for certain coloration could be developed based on accurate histological information of parental material together with the knowledge of heritability of color and color intensity. A sample of 12 Anthurium species and hybrids were histologically examined for pigmentation in spathes using a new method employing vacuum infiltration of spathe tissue with polyethylene glycol (PEG) prior to cross-sectioning. PEG infiltration displaces intercellular air spaces between cells. This method greatly improved the clarity of the cross sections and consequently improved observations of spatial localization of anthocyanins and chloroplasts. This infiltration method accurately identified the spatial localization of pigments for future breeding reference, notably among Anthurium species.


1952 ◽  
Vol 30 (1) ◽  
pp. 28-39 ◽  
Author(s):  
G. Krotkov ◽  
W. Constance G. Bennett

Using the technique of vacuum infiltration, either a mixture of glucose plus fructose or a solution of sucrose alone was introduced into detached wheat leaves, and the rates of sucrose synthesis or hydrolysis from these infiltrated sugars were observed. It was found that these rates were not constant during 24 hr., but depended on the time of the day or night when the leaves were cut. Synthesis was high in leaves detached in the forenoon, before sunset, and in the first part of the night. Changes in the rate of hydrolysis were usually mirror images of those of synthesis. It has been concluded that in wheat leaves there exists a diurnal rhythm in their synthetic and hydrolytic potential and that the observed diurnal changes in the rates of sucrose synthesis and hydrolysis represent one of the manifestations of such a rhythm. Sodium fluoride, sodium cyanide, iodoacetate, and dinitrophenol always increased hydrolysis, and usually decreased synthesis. When glucose-1-phosphate, fructose-6-phosphate, and fructose-1, 6-diphosphate were substituted for the corresponding free sugar in a mixture of glucose plus fructose, a decrease in sucrose synthesis was observed. After 24 hr. of starvation the rate of sucrose synthesis declined, and eventually dropped practically to zero at the end of five days. In the same time there was a progressive increase in the rate of hydrolysis.


2012 ◽  
Vol 43 (7) ◽  
pp. 2514-2519 ◽  
Author(s):  
Chenchong Wang ◽  
Guoqin Chen ◽  
Xu Wang ◽  
Yunhe Zhang ◽  
Wenshu Yang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document