Enzymatic Saccharification of Cellulose Pretreated from Lignocellulosic Biomass: Status and Prospect

2012 ◽  
Vol 446-449 ◽  
pp. 2809-2814
Author(s):  
Yu Xiao Wang ◽  
Meng Jiao Dong ◽  
Wen Chang Zhuang
Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 680
Author(s):  
Giuseppe Olivieri ◽  
René H. Wijffels ◽  
Antonio Marzocchella ◽  
Maria Elena Russo

Saccharification of lignocellulosic biomass is a fundamental step in the biorefinery of second generation feedstock. The physicochemical and enzymatic processes for the depolymerization of biomass into simple sugars has been achieved through numerous studies in several disciplines. The present review discusses the development of technologies for enzymatic saccharification in industrial processes. The kinetics of cellulolytic enzymes involved in polysaccharide hydrolysis has been discussed as the starting point for the design of the most promising bioreactor configurations. The main process configurations—proposed so far—for biomass saccharification have been analyzed. Attention was paid to bioreactor configurations, operating modes and possible integrations of this operation within the biorefinery. The focus is on minimizing the effects of product inhibition on enzymes, maximizing yields and concentration of sugars in the hydrolysate, and reducing the impact of enzyme cost on the whole process. The last part of the review is focused on an emerging process based on the catalytic action of laccase applied to lignin depolymerization as an alternative to the consolidated physicochemical pretreatments. The laccases-based oxidative process has been discussed in terms of characteristics that can affect the development of a bioreactor unit where laccases or a laccase-mediator system can be used for biomass delignification.


Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2110
Author(s):  
Vitor B. Furlong ◽  
Luciano J. Corrêa ◽  
Roberto C. Giordano ◽  
Marcelo P. A. Ribeiro

The enzymatic hydrolysis of lignocellulosic biomass incorporates many physico-chemical phenomena, in a heterogeneous and complex media. In order to make the modeling task feasible, many simplifications must be assumed. Hence, different simplified models, such as Michaelis-Menten and Langmuir-based ones, have been used to describe batch processes. However, these simple models have difficulties in predicting fed-batch operations with different feeding policies. To overcome this problem and avoid an increase in the complexity of the model by incorporating other phenomenological terms, a Takagi-Sugeno Fuzzy approach has been proposed, which manages a consortium of different simple models for this process. Pretreated sugar cane bagasse was used as biomass in this case study. The fuzzy rule combines two Michaelis-Menten-based models, each responsible for describing the reaction path for a distinct range of solids concentrations in the reactor. The fuzzy model improved fitting and increased prediction in a validation data set.


Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 331 ◽  
Author(s):  
Huiyang Bian ◽  
Xinxing Wu ◽  
Jing Luo ◽  
Yongzhen Qiao ◽  
Guigan Fang ◽  
...  

Developing economical and sustainable fractionation technology of lignocellulose cell walls is the key to reaping the full benefits of lignocellulosic biomass. This study evaluated the potential of metal chloride-assisted p-toluenesulfonic acid (p-TsOH) hydrolysis at low temperatures and under acid concentration for the co-production of sugars and lignocellulosic nanofibrils (LCNF). The results indicated that three metal chlorides obviously facilitated lignin solubilization, thereby enhancing the enzymatic hydrolysis efficiency and subsequent cellulose nanofibrillation. The CuCl2-assisted hydrotropic pretreatment was most suitable for delignification, resulting in a relatively higher enzymatic hydrolysis efficiency of 53.2%. It was observed that the higher residual lignin absorbed on the fiber surface, which exerted inhibitory effects on the enzymatic hydrolysis, while the lower lignin content substrates resulted in less entangled LCNF with thinner diameters. The metal chloride-assisted rapid and low-temperature fractionation process has a significant potential in achieving the energy-efficient and cost-effective valorization of lignocellulosic biomass.


2013 ◽  
Vol 2013.49 (0) ◽  
pp. 69-70
Author(s):  
Kouhei KOBAYASHI ◽  
Jianhui QIU ◽  
Takuya KAWAI ◽  
Eiichi SAKAI ◽  
Junichi KOBAYASHI ◽  
...  

2018 ◽  
Vol 18 (1) ◽  
Author(s):  
Ronald R. Navarro ◽  
Yuichiro Otsuka ◽  
Masanobu Nojiri ◽  
Shigehiro Ishizuka ◽  
Masaya Nakamura ◽  
...  

2015 ◽  
Vol 102 ◽  
pp. 38-44 ◽  
Author(s):  
Sunil K Khare ◽  
Ashok Pandey ◽  
Christian Larroche

Sign in / Sign up

Export Citation Format

Share Document