A study on the processing technology for Rhizoma Coptidis

Background The present study intends to optimize the processing technology for the wine-processing of Rhizoma Coptidis, using alkaloids as indicators. Method In the present study, the Box–Behnken design method was adopted to optimize the processing technology for Rhizoma Coptidis, using the alkaloid component quantities as the index. 100 g of Rhizoma Coptidis slices and 12.5 g of Rhizoma Coptidis wine were used. After full mixing, box-Behnken design method was used to optimize the processing time, processing temperature and processing time of coptis chinensis by taking alkaloid content as index. After mixing well, these components were fried in a container at 125 °C for 6 min and exhibited good parallelism. Results The content of alkaloids in coptis chinensis was the highest after roasting at 125 °C for 6 min. The characteristic components were berberine hydrochloride, and the relative content was about 15.96%. And showed good parallelism. The effective components of Rhizoma Coptidis were primarily alkaloids. Conclusion The optimized processing technology for Rhizoma Coptidis is good.

Tenebrio molitor: possible source of polystyrene-degrading bacteria

Background The excessive use of polystyrene as a packaging material has resulted in a rise in environmental pollution. Polystyrene waste has continually increased water pollution, soil pollution and the closing of landfill sites since it is durable and resistant to biodegradation. Therefore, the challenge in polystyrene disposal has caused researchers to look for urgent innovative and eco-friendly solutions for plastic degradation. The current study focuses on the isolation and identification of bacteria produced by the larvae of beetle Tenebrio molitor (yellow mealworms), that enable them to survive when fed with polystyrene foam as their sole carbon diet. Materials and methods The biodegradation of polystyrene by Tenebrio molitor was investigated by breeding and rearing the mealworms in the presence and absence of polystyrene. A comparison was made between those fed with a normal diet and those fed on polystyrene. The mealworms which were fed with polystyrene were then dissected and the guts were collected to isolate and identify the bacteria in their guts. The viability and metabolic activity of the isolates were investigated. The polymerase chain reaction (PCR) followed by sequencing was used for molecular identification of the isolates. The PCR products were directly sequenced using Sanger’s method and the phylogenetic tree and molecular evolutionary analyses were constructed using MEGAX software with the Neighbour Joining algorithm. The evolutionary distances were computed using the Maximum Composite Likelihood method. Results The decrease in mass of the polystyrene as feedstock confirmed that the mealworms were depending on polystyrene as their sole carbon diet. The frass egested by mealworms also confirmed the biodegradation of polystyrene as it contained very tiny residues of polystyrene. Three isolates were obtained from the mealworms guts, and all were found to be gram-negative. The sequencing results showed that the isolates were Klebsiella oxytoca ATCC 13182, Klebsiella oxytoca NBRC 102593 and Klebsiella oxytoca JCM 1665. Conclusion Klebsiella oxytoca ATCC 13182, Klebsiella oxytoca NBRC 102593 and Klebsiella oxytoca JCM 1665 maybe some of the bacteria responsible for polystyrene biodegradation.

Media optimization for SHuffle T7 Escherichia coli expressing SUMO-Lispro proinsulin by response surface methodology

Background SHuffle is a suitable Escherichia coli (E. coli) strain for high yield cytoplasmic soluble expression of disulfide-bonded proteins such as Insulin due to its oxidative cytoplasmic condition and the ability to correct the arrangement of disulfide bonds. Lispro is an Insulin analog that is conventionally produced in E. coli as inclusion bodies (IBs) with prolonged production time and low recovery. Here in this study, we aimed to optimize cultivation media composition for high cell density fermentation of SHuffle T7 E. coli expressing soluble Lispro proinsulin fused to SUMO tag (SU-INS construct) to obtain high cell density fermentation. Results Factors including carbon and nitrogen sources, salts, metal ions, and pH were screened via Plackett–Burman design for their effectiveness on cell dry weight (CDW) as a measure of cell growth. The most significant variables of the screening experiment were Yeast extract and MgCl2 concentration, as well as pH. Succeedingly, The Central Composite Design was utilized to further evaluate and optimize the level of significant variables. The Optimized media (OM-I) enhanced biomass by 2.3 fold in the shake flask (2.5 g/L CDW) that reached 6.45 g/L (2.6 fold increase) when applied in batch culture fermentation. The efficacy of OM-I media for soluble expression was confirmed in both shake flask and fermentor. Conclusion The proposed media was suitable for high cell density fermentation of E. coli SHuffle T7 and was applicable for high yield soluble expression of Lispro proinsulin.

Enzymatic degradation is an effective means to reduce aflatoxin contamination in maize

Background Aflatoxins are carcinogenic compounds produced by certain species of Aspergillus fungi. The consumption of crops contaminated with this toxin cause serious detrimental health effects, including death, in both livestock and humans. As a consequence, both the detection and quantification of this toxin in food/feed items is tightly regulated with crops exceeding the allowed limits eliminated from food chains. Globally, this toxin causes massive agricultural and economic losses each year. Results In this paper we investigate the feasibility of using an aflatoxin-degrading enzyme strategy to reduce/eliminate aflatoxin loads in developing maize kernels. We used an endoplasmic reticulum (ER) targeted sub-cellular compartmentalization stabilizing strategy to accumulate an aflatoxin-degrading enzyme isolated from the edible Honey mushroom Armillariella tabescens and expressed it in embryo tissue in developing maize kernels. Three transgenic maize lines that were determined to be expressing the aflatoxin-degrading enzyme both at the RNA and protein level, were challenged with the aflatoxin-producing strain Aspergillus flavus AF13 and shown to accumulate non-detectable levels of aflatoxin at 14-days post-infection and significantly reduced levels of aflatoxin at 30-days post-infection compared to nontransgenic control Aspergillus-challenged samples. Conclusions The expression of an aflatoxin-degrading enzyme in developing maize kernels was shown to be an effective means to control aflatoxin in maize in pre-harvest conditions. This aflatoxin-degradation strategy could play a significant role in the enhancement of both US and global food security and sustainability.

Expression, purification and characterisation of a human anti-CDK4 single-chain variable fragment antibody

Background Cyclin-dependent kinase 4 (CDK4) when hyperactivated drives development and maintenance of most tumour types, thus prompting its use as an essential cancer treatment target and a diagnostic tool. Target-binding molecules, such as single-chain variable fragment (scFv) antibodies, hold tremendous potential for use in a wide range of cancer diagnostic and therapeutic applications. Results A human anti-CDK4 scFv antibody (AK2) derived from a human phage display library was expressed in soluble form in Escherichia coli and shown to be secreted into the culture supernatant. Next, soluble AK2 within culture supernatant was successfully purified using affinity chromatography then was shown, using enzyme-linked immunosorbent assays, to bind to recombinant human CDK4 with high affinity and specificity. Further analyses of AK2 interactions with intracellular components demonstrated that AK2 recognised and interacted specifically with endogenous CDK4 and thus could be useful for detection of CDK4 within tumour cells. Conclusions A novel anti-CDK4 scFv antibody that can recognise and interact specifically with recombinant human CDK4 and endogenous CDK4 in tumour cells was expressed and purified successfully. These results suggest that the anti-CDK4 scFv antibody may serve as a new and promising tool for achieving CDK4-targeted diagnosis, prognosis and treatment of numerous types of cancers.

Chloroplast genome sequencing based on genome skimming for identification of Eriobotryae Folium

Background Whole chloroplast genome (cpDNA) sequence is becoming widely used in the phylogenetic studies of plant and species identification, but in most cases the cpDNA were acquired from silica gel dried fresh leaves. So far few reports have been available to describe cpDNA acquisition from crude drugs derived from plant materials, the DNA of which usually was seriously damaged during their processing. In this study, we retrieved cpDNA from the commonly used crude drug Eriobotryae Folium (Pipaye in Chinese, which is the dried leaves of Eriobotrya japonica, PPY) using genome skimming technique. Results We successfully recovered cpDNA sequences and rDNA sequences from the crude drug PPY, and bioinformatics analysis showed a high overall consistency between the cpDNA obtained from the crude drugs and fresh samples. In the ML tree, each species formed distinct monophyletic clades based on cpDNA sequence data, while the phylogenetic relationships between Eriobotrya species were poorly resolved based on ITS and ITS2. Conclusion Our results demonstrate that both cpDNA and ITS/ITS2 are effective for identifying PPY and its counterfeits derived from distantly related species (i.e. Dillenia turbinata and Magnolia grandiflora), but cpDNA is more effective for distinguishing the counterfeits derived from the close relatives of Eriobotrya japonica, suggesting the potential of genome skimming for retrieving cpDNA from crude drugs used in Traditional Chinese Medicine for their identification.

Antibacterial effect of cerium oxide nanoparticle against Pseudomonas aeruginosa

Background Antibiotics have been widely used for the treatment of bacterial infections for decades. However, the rapid emergence of antibiotic-resistant bacteria has created many problems with a heavy burden for the medical community. Therefore, the use of nanoparticles as an alternative for antibacterial activity has been explored. In this context, metal nanoparticles have demonstrated broad-spectrum antimicrobial activity. This study investigated the antimicrobial activity of naked cerium oxide nanoparticles dispersed in aqueous solution (CNPs) and surface-stabilized using Pseudomonas aeruginosa as a bacterial model. Methods Gelatin-polycaprolactone nanofibers containing CNPs (Scaffold@CNPs) were synthesized, and their effect on P. aeruginosa was investigated. The minimum inhibitory and bactericidal concentrations of the nanoparticls were determined in an ATCC reference strain and a clinical isolate strain. To determine whether the exposure to the nanocomposites might change the expression of antibiotic resistance, the expression of the genes shv, kpc, and imp was also investigated. Moreover, the cytotoxicity of the CNPs was assessed on fibroblast using flow cytometry. Results Minimum bactericidal concentrations for the ATCC and the clinical isolate of 50 µg/mL and 200 µg/mL were measured, respectively, when the CNPs were used. In the case of the Scaffold@CNPs, the bactericidal effect was 50 µg/mL and 100 µg/mL for the ATCC and clinical isolate, respectively. Interestingly, the exposure to the Scaffold@CNPs significantly decreased the expression of the genes shv, kpc, and imp. Conclusions A concentration of CNPs and scaffold@CNPs higher than 50 μg/mL can be used to inhibit the growth of P. aeruginosa. The fact that the scaffold@CNPs significantly reduced the expression of resistance genes, it has the potential to be used for medical applications such as wound dressings.

Computational modeling of PET tracer distribution in solid tumors integrating microvasculature

Background We present computational modeling of positron emission tomography radiotracer uptake with consideration of blood flow and interstitial fluid flow, performing spatiotemporally-coupled modeling of uptake and integrating the microvasculature. In our mathematical modeling, the uptake of fluorodeoxyglucose F-18 (FDG) was simulated based on the Convection–Diffusion–Reaction equation given its high accuracy and reliability in modeling of transport phenomena. In the proposed model, blood flow and interstitial flow are solved simultaneously to calculate interstitial pressure and velocity distribution inside cancer and normal tissues. As a result, the spatiotemporal distribution of the FDG tracer is calculated based on velocity and pressure distributions in both kinds of tissues. Results Interstitial pressure has maximum value in the tumor region compared to surrounding tissue. In addition, interstitial fluid velocity is extremely low in the entire computational domain indicating that convection can be neglected without effecting results noticeably. Furthermore, our results illustrate that the total concentration of FDG in the tumor region is an order of magnitude larger than in surrounding normal tissue, due to lack of functional lymphatic drainage system and also highly-permeable microvessels in tumors. The magnitude of the free tracer and metabolized (phosphorylated) radiotracer concentrations followed very different trends over the entire time period, regardless of tissue type (tumor vs. normal). Conclusion Our spatiotemporally-coupled modeling provides helpful tools towards improved understanding and quantification of in vivo preclinical and clinical studies.

Design of a new lyoprotectant increasing freeze-dried Lactobacillus strain survival to long-term storage

Background Stabilization of freeze-dried lactic acid bacteria during long-term storage is challenging for the food industry. Water activity of the lyophilizates is clearly related to the water availability and maintaining a low aw during storage allows to increase bacteria viability. The aim of this study was to achieve a low water activity after freeze-drying and subsequently during long-term storage through the design of a lyoprotectant. Indeed, for the same water content as sucrose (commonly used lyoprotectant), water activity is lower for some components such as whey, micellar casein or inulin. We hypothesized that the addition of these components in a lyoprotectant, with a higher bound water content than sucrose would improve lactobacilli strains survival to long-term storage. Therefore, in this study, 5% whey (w/v), 5% micellar casein (w/v) or 5% inulin (w/v) were added to a 5% sucrose solution (w/v) and compared with a lyoprotectant only composed of 5% sucrose (w/v). Protective effect of the four lyoprotectants was assessed measuring Lactiplantibacillus plantarum CNCM I-4459 survival and water activity after freeze-drying and during 9 months storage at 25 °C. Results The addition whey and inulin were not effective in increasing Lactiplantibacillus plantarum CNCM I-4459 survival to long-term-storage (4 log reduction at 9 months storage). However, the addition of micellar casein to sucrose increased drastically the protective effect of the lyoprotectant (3.6 log i.e. 0.4 log reduction at 9 months storage). Comparing to a lyoprotectant containing whey or inulin, a lyoprotectant containing micellar casein resulted in a lower water activity after freeze-drying and its maintenance during storage (0.13 ± 0.05). Conclusions The addition of micellar casein to a sucrose solution, contrary to the addition of whey and inulin, resulted in a higher bacterial viability to long-term storage. Indeed, for the same water content as the others lyoprotectants, a significant lower water activity was obtained with micellar casein during storage. Probably due to high bound water content of micellar casein, less water could be available for chemical degradation reactions, responsible for bacterial damages during long-term storage. Therefore, the addition of this component to a sucrose solution could be an effective strategy for dried bacteria stabilization during long-term storage.

Optimization of lipase production using fungal isolates from oily residues

Lipases are triacylglycerol hydrolases that catalyze hydrolysis, esterification, interesterification, and transesterification reactions. These enzymes are targets of several industrial and biotech applications, such as catalysts, detergent production, food, biofuels, wastewater treatment, and others. Microbial enzymes are preferable for large scale production due to ease of production and extraction. Several studies have reported that lipases from filamentous fungi are predominantly extracellular and highly active. However, there are many factors that interfere with enzyme production (pH, temperature, medium composition, agitation, aeration, inducer type, and concentration, etc.), making control difficult and burdening the process. This work aimed to optimize the lipase production of four fungal isolates from oily residues (Penicillium sp., Aspergillus niger, Aspergillus sp., and Aspergillus sp.). The lipase-producing fungi isolates were morphologically characterized by optical and scanning electron microscopy. The optimal lipase production time curve was previously determined, and the response variable used was the amount of total protein in the medium after cultivation by submerged fermentation. A complete factorial design 32 was performed, evaluating the temperatures (28 °C, 32 °C, and 36 °C) and soybean oil inducer concentration (2%, 6%, and 10%). Each lipase-producing isolate reacted differently to the conditions tested, the Aspergillus sp. F18 reached maximum lipase production, compared to others, under conditions of 32 °C and 2% of oil with a yield of 11,007 (µg mL−1). Penicillium sp. F04 achieved better results at 36 °C and 6% oil, although for Aspergillus niger F16 was at 36 °C and 10% oil and Aspergillus sp. F21 at 32 °C and 2% oil. These results show that microorganisms isolated from oily residues derived from environmental sanitation can be a promising alternative for the large-scale production of lipases. Graphical Abstract