Surface Modification for Porous Artificial Lightweight Aggregate and Mechanical Properties of the Resulting Concrete

2011 ◽  
Vol 117-119 ◽  
pp. 1302-1305
Author(s):  
Ning Liao ◽  
Hong Zhi Cui
Keyword(s):  
Mechanical Properties ◽  
Surface Modification ◽  
Water Absorption ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
High Water ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
High Water Absorption ◽  
Change Material

This research is one part of preliminary work for integrated structural-functional energy storage concrete by using porous artificial lightweight aggregate and phase change material. Lightweight aggregate concrete (LWAC) has been applied more and more extensively in recent years, but high water absorption of porous artificial lightweight aggregate (LWA) is inconvenient for LWAC production. In order to improve LWA application, in this paper, two aspects of lightweight aggregate (LWA) study have been carried out, namely, a) LWA surface modification. The effects of different concentration of surface modifier on water absorption of modified LWA were studied. b) Mechanical properties of lightweight aggregate concrete made of the unmodified and modified LWAs Through comparing the water absorption of unmodified and modified LWAs, it can be known that the surface modification for LWA can reduce the water absorption obviously. The three kinds of lightweight concrete possess nearly same strength at 7-day and, at 28-day, the strength of LWAC using 1:20 modified LWA is highest and that of LWAC using 1:5 modified LWA is lowest. 28 days compressive strength of LWAC using 1:20 modified LWA could be up to 46.1MPa.

Lightweight Aggregate Concrete as an Alternative for Dense Concrete in Post-Tensioned Concrete Slab

2018 ◽  
Vol 926 ◽  
pp. 140-145 ◽  
Author(s):  
Małgorzata Mieszczak ◽  
Lucyna Domagała
Keyword(s):  
Mechanical Properties ◽  
Lightweight Concrete ◽  
Concrete Slab ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Large Span ◽  
Shrinkage And Creep ◽  
Theoretical Results ◽  
Post Tensioned

The paper presents the results of tests conducted on two lightweight aggregate concretes made of new national Certyd artificial aggregate. This research is intended to first application of lightweight concrete to construct large-span post-tensioned slab. In addition to mechanical properties development, shrinkage and creep during 3 months of loading were tested. The obtained results are compared with theoretical results predicted by standard. Conducted tests indicated, that measured values of shrinkage and creep are significantly lower than predicted ones. This is promise for application of tested concrete in construction of post-tensioned slabs.

Water Absorbing and Releasing of Lightweight Aggregate and its Influence on Frost-Resistance of Combined Aggregate Concrete

2011 ◽  
Vol 217-218 ◽  
pp. 51-56 ◽  
Author(s):  
Li Xiong Gao ◽  
Li Juan Kong ◽  
Yong Ge
Keyword(s):  
Water Absorption ◽  
Cement Paste ◽  
Frost Resistance ◽  
Lightweight Aggregate ◽  
High Water ◽  
Interfacial Zone ◽  
Aggregate Concrete ◽  
High Water Absorption ◽  
Dense Shell ◽  
Curing Age

Water absorbing and releasing property of lightweight aggregate (LWA) in concrete and its influence on microstructure of interfacial zone as well as frost-resistance of combined aggregate prepared with different water absorption LWA and w/b ratios were investigated. The results show that, as for concrete with low w/b ratio, the 28d frost-resistance of concrete prepared with high water absorption LWA is worse, however with the increase of curing age, the 90d frost-resistance of concrete improves obviously, which is due to the water releasing of LWA that leads to the recovery of its air entraining effect as well as the densification and thicken of interfacial zone. So the LWA with moderate water absorption should be selected to prepare the low w/b ratio concrete. As for concrete with high w/b ratio, the frost-resistance of concrete prepared with low water absorption LWA is the best. This is account for the dense shell of ceramsite that could reduce the soakage from loose cement paste under frozen pressure.

scholarly journals Design Efficiency, Characteristics, and Utilization of Reinforced Foamed Concrete: A Review

Crystals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 948
Author(s):  
Mugahed Amran ◽  
Yeong Huei Lee ◽  
Nikolai Vatin ◽  
Roman Fediuk ◽  
Shek Poi-Ngian ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lightweight Concrete ◽  
Direct Method ◽  
Construction Material ◽  
Lightweight Aggregate ◽  
Reduction Factor ◽  
Lightweight Aggregate Concrete ◽  
Limit States ◽  
Design Efficiency ◽  
Aggregate Concrete

Foam concrete (FC) serves as an efficient construction material that combines well thermal insulation and structural properties. The studies of material characteristics, including the mechanical, physical, rheological, and functional properties of lightweight concrete, have been conducted rigorously. However, a lack of knowledge on the design efficiency of reinforced FC (RFC) was found in current research trends, compared to reinforced lightweight aggregate concrete. Therefore, this paper presents a review of the performance and adaption in structures for RFC. According to the code specifications, the feasibility investigation was preliminarily determined in structural use through the summary for the mechanical properties of FC of FC’s mechanical properties. For reinforced concrete design, a direct method of reduction factors is introduced to design lightweight aggregate concrete, which is also suggested to be adapted into a lightweight FC design. It was found that flexural shear behavior is a more complex theoretical analysis than flexure. However, a reduction factor of 0.75 was recommended for shear, torsion, and compression; meanwhile, 0.6 for flexural members. Serviceability limit states design should be applied, as the crack was found predominant in RFC design. The deflection controls were recommended as 0.7 by previous research. Research on RFC’s compression members, such as a column or load load-bearing wall, were rarely found. Thus, further study for validating a safe design of RFC applications in construction industries today is highly imperative.

Mix Proportion Design and Basic Mechanical Properties Experiment of Self-Compacting Lightweight Concrete

2012 ◽  
Vol 450-451 ◽  
pp. 329-333
Author(s):  
Xi Jun Liu ◽  
Yu Mei Wang
Keyword(s):  
Mechanical Properties ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Compression Tests ◽  
Normal Concrete ◽  
Aggregate Concrete ◽  
Mix Proportion ◽  
Sand And Gravel ◽  
Volume Method

In order to get the requirements of workability and basic mechanical properties of self-compacting lightweight aggregate concrete, fixed sand and gravel volume method and overall calculation method are used to mix design. Slump flow and L-box tests are used to test the workability of self-compacting lightweight aggregate concrete, the strength increasing and the final value are tested by compression tests. For contrast, a set of common concrete is selected to compare the differences of efficiency. Tests indicated that the 5 groups of self-compacting lightweight aggregate concrete can get the requirements of workability and compressive strength, and the structure efficiency can be significantly higher than normal concrete.

Permeability of Lightweight Aggregate Concrete with Mineral Admixture

2013 ◽  
Vol 857 ◽  
pp. 105-109
Author(s):  
Xiu Hua Zheng ◽  
Shu Jie Song ◽  
Yong Quan Zhang
Keyword(s):  
Pore Structure ◽  
Lightweight Concrete ◽  
Chloride Ion ◽  
Lightweight Aggregate ◽  
Total Porosity ◽  
Normal Weight ◽  
Mineral Admixture ◽  
Mineral Admixtures ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete

This paper presents an experimental study on the permeability and the pore structure of lightweight concrete with fly ash, zeolite powder, or silica fume, in comparison to that of normal weight aggregate concrete. The results showed that the mineral admixtures can improve the anti-permeability performance of lightweight aggregate concrete, and mixed with compound mineral admixtures further more. The resistance to chloride-ion permeability of light weight concrete was higher than that of At the same strength grade, the anti-permeability performance of lightweight aggregate concrete is better than that of normal weight aggregate concrete. The anti-permeability performance of LC40 was similar to that of C60. Mineral admixtures can obviously improve the pore structure of lightweight aggregate concrete, the total porosity reduced while the pore size decreased.

Evaluation of fire performance of lightweight concrete wall panels using finite element analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Irindu Upasiri ◽  
Chaminda Konthesingha ◽  
Anura Nanayakkara ◽  
Keerthan Poologanathan ◽  
Brabha Nagaratnam ◽  
...  
Keyword(s):  
Finite Element ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fire Performance ◽  
Concrete Wall ◽  
Aggregate Concrete ◽  
Content Type ◽  
Wall Panels ◽  
Foamed Concrete

Purpose In this study, the insulation fire ratings of lightweight foamed concrete, autoclaved aerated concrete and lightweight aggregate concrete were investigated using finite element modelling. Design/methodology/approach Lightweight aggregate concrete containing various aggregate types, i.e. expanded slag, pumice, expanded clay and expanded shale were studied under standard fire and hydro–carbon fire situations using validated finite element models. Results were used to derive empirical equations for determining the insulation fire ratings of lightweight concrete wall panels. Findings It was observed that autoclaved aerated concrete and foamed lightweight concrete have better insulation fire ratings compared with lightweight aggregate concrete. Depending on the insulation fire rating requirement of 15%–30% of material saving could be achieved when lightweight aggregate concrete wall panels are replaced with the autoclaved aerated or foamed concrete wall panels. Lightweight aggregate concrete fire performance depends on the type of lightweight aggregate. Lightweight concrete with pumice aggregate showed better fire performance among the normal lightweight aggregate concretes. Material saving of 9%–14% could be obtained when pumice aggregate is used as the lightweight aggregate material. Hydrocarbon fire has shown aggressive effect during the first two hours of fire exposure; hence, wall panels with lesser thickness were adversely affected. Originality/value Finding of this study could be used to determine the optimum lightweight concrete wall type and the optimum thickness requirement of the wall panels for a required application.

scholarly journals Characterization of lightweight concrete made of palm oil clinker aggregates

2018 ◽  
Vol 250 ◽  
pp. 03002 ◽  
Author(s):  
Muhammad Sazlly Nazreen ◽  
Roslli Noor Mohamed ◽  
Mariyana Aida Ab Kadir ◽  
Nazry Azillah ◽  
Nazirah Ahmad Shukri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Palm Oil ◽  
Lightweight Concrete ◽  
Flexural Modulus ◽  
Pulse Velocity ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Fine Aggregate ◽  
Test Results ◽  
Aggregate Concrete

Lightweight concrete (LWC) has been identified as an innovative technique for construction purposes. Lightweight concrete can be categorized into three different types which are no-fine aggregate concrete, lightweight aggregate concrete and aerated concrete. This paper studied the characteristic of the lightweight concrete in term of mechanical properties utilizing the palm oil clinker (POC) as lightweight aggregates. Two mixes of lightweight concrete were developed, namely as POCC100 and POCC50 where each mix utilized 100% and 50% of total replacement to fine and coarse aggregates, respectively. The fresh and hardened POC concrete was tested and compared to the normal concrete (NC). The hardened state of the concrete was investigated through density test, ultrasonic pulse velocity, cube compressive, splitting tensile, flexural, modulus of elasticity and Poisson's ratio. From density test results, POC falls into the category of lightweight concrete with a density of 1990.33 kg/m3, which are below than normal weight concrete density. The mechanical properties test results on POCC100 and POCC50 showed that the concrete compressive strength was comparable about 85.70% and 96% compared to NC specimen, respectively. For the flexural strength, POCC50 and POCC100 were comparable about 98% and 97% to NC specimen, respectively. While splitting tensile strength of POCC50 and POCC100 was only 0.6% and 4% lower than NC specimen, respectively. In terms of sustainability of solid waste management, the application of the POC in construction will reduce the redundant of by-products resulted from the palm oil industries. After undergoing various testing of concrete mechanical properties, it can be concluded that POC aggregates was compatible to be used in ligtweight concrete mix proportion.

Sign in / Sign up

Export Citation Format

Share Document