Study on the Panel Fabrication for the Field Emission Display with Symmetrical Electrode Stripe

2011 ◽  
Vol 142 ◽  
pp. 58-61
Author(s):  
Yan Xia Ma
Keyword(s):  
Field Emission ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Emission Characteristics ◽  
Plate Surface ◽  
Insulation Layer ◽  
Field Emission Display ◽  
Ito Film ◽  
Ito Electrode ◽  
Substrate Plate

Using carbon nanotubes as cold cathode material, the panel fabrication for the diode field emission display (FED) with symmetrical electrode stripe was studied. The indium tin oxide (ITO) film was used as conduction electrode on the substrate plate surface, and the precise photolithography method was adopted as the high effective fabrication process. For the both cathode and anode plate, the whole ITO film would be etched in the bar form, and the divided bar ITO stripe would be arranged symmetrically. On the cathode plate surface, the printed silver slurry was used to form the cathode extension lines and the cathode insulation layer was formed with the sintered insulation slurry. Whether for the cathode ITO electrodes or for the anode ITO electrodes, the length of bar ITO electrode become small, which would be beneficial for reducing the panel working-voltage. The FED panel was sealed and measured, which possessed good field emission characteristics.

Fabrication Study on Rectangular Luminous Layer for Field Emission Display Panel

2011 ◽  
Vol 322 ◽  
pp. 152-155
Author(s):  
Yong Sheng Zhu ◽  
Chun Tao Bai ◽  
Dong Feng Zhou ◽  
Qian Wang
Keyword(s):  
Field Emission ◽  
Indium Tin Oxide ◽  
Voltage Drop ◽  
Emission Characteristic ◽  
Field Emission Display ◽  
Image Brightness ◽  
Phosphor Layer ◽  
Ito Film ◽  
Ito Electrode ◽  
Field Emission Characteristic

Using carbon nanotube as field emitter, the field emission display (FED) panel with rectangular luminous layer was fabricated. The etched indium tin oxide (ITO) film was used as the ITO electrodes, and the phosphor powder was prepared to form the phosphor layer, so the rectangular luminous layer was fabricated on the anode back plane. In one anode pixel, the three anode sub-pixels would be included, which would reside on the same ITO electrode surface. The insulation layer would separate the adjacent anode sub-pixels and the adjacent ITO electrode, and the fabricated anode extension line was mainly used to reduce the excessive voltage drop. The FED panel with rectangular luminous layer possessed good field emission characteristic and high image brightness.

Research on the Emission Property of Cold Cathode Emitter with Enhanced Bar Electrode in a FED Panel

2011 ◽  
Vol 204-210 ◽  
pp. 156-159
Author(s):  
Chao Wu ◽  
Yan Cui
Keyword(s):  
Field Emission ◽  
Indium Tin Oxide ◽  
Silver Electrode ◽  
Large Field ◽  
Field Emission Display ◽  
Field Emission Properties ◽  
Ito Film ◽  
Ito Electrode ◽  
Field Emission Current ◽  
Photolithography Process

Using carbon nanotube (CNT) as cathode material, the field emission display (FED) panel with enhanced bar electrode was fabricated. With the photolithography process, the indium tin oxide (ITO) film was divided to form the cathode ITO electrode. The printed silver slurry was sintered to act as the cathode silver electrode, which was prepared on the cathode ITO electrode surface. The insulation layer was also fabricated on the cathode plate. The CNT paste was screen-printed on the surface of cathode ITO electrode and cathode silver electrode to form the field emitter. The detailed fabrication process of FED panel was given, and the sealed FED panel showed better field emission properties. Because of the enhanced bar electrode, the large field emission current was obtained.

Enhanced Field Emission Studies of Carbon Nanotube Emitters with Cross-Like Cathode Electrode for the FED Panel

2011 ◽  
Vol 382 ◽  
pp. 229-232
Author(s):  
Yan Xia Ma
Keyword(s):  
Carbon Nanotube ◽  
Field Emission ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Electrode Structure ◽  
Field Emission Display ◽  
Screen Printing Method ◽  
Field Emission Properties ◽  
Cathode Electrode ◽  
Emission Studies

With screen-printing method, the diode field emission display panel was fabricated. On the cathode back plane, the cross-like cathode electrode structure was developed for improving the field emission properties of field emission display panel. The prepared carbon nanotubes were utilized to form the electron emission sources, and the necessary cathode potential for the carbon nanotube cathode could be conducted by the indium tin oxide stripe. Seen from the fabrication pattern, the divided indium tin oxide stripe was cross-like, but the fabrication surface for the single carbon nanotube cathode pixel was circular. The whole field emission display panel possessed good field emission characteristics.

Improvement and Fabrication of Anode Pixel for FED Panel with Cold Cathode Emitters

2011 ◽  
Vol 322 ◽  
pp. 314-317
Author(s):  
Chun Tao Bai ◽  
Yong Sheng Zhu ◽  
Dong Feng Zhou ◽  
He Niu
Keyword(s):  
Field Emission ◽  
Indium Tin Oxide ◽  
Screen Printing ◽  
Flat Glass ◽  
Soda Lime ◽  
Insulation Layer ◽  
Field Emission Display ◽  
Screen Printing Method ◽  
Field Emitters ◽  
Anode Electrode

With high effective screen-printing process, the diode field emission display (FED) panel was fabricated. The soda-lime flat glass was used as panel anode plate, and the indium tin oxide film covered on the anode plate surface was etched, which was used to form the anode electrodes. With simple screen printing method, the phosphor paste was prepared on the exposed anode electrode surface, so the phosphor dots were fabricated. Using insulation slurry as material, the insulation layer was also fabricated on the anode plate. The fabricated FED panel with carbon nanotube field emitters possessed good field emission characteristics and image displaying performance.

Study of Vacuum-Sealed Field Emission Display Device with Discrete Anode Sub-Pixel Layer

2010 ◽  
Vol 663-665 ◽  
pp. 219-222
Author(s):  
Chao Wu ◽  
Yan Feng Zhang ◽  
Ting Yue Guo
Keyword(s):  
Field Emission ◽  
Indium Tin Oxide ◽  
Layer Structure ◽  
Emission Characteristics ◽  
Display Device ◽  
Field Emission Display ◽  
Image Brightness ◽  
Conventional Sintering ◽  
Anode Electrode ◽  
Photolithography Process

Using carbon nanotube as field emitter, the diode-structure field emission display device was fabricated with conventional sintering techniques. With the precise photolithography process, the indium tin oxide film coated on the anode faceplate surface was etched to form the bar anode electrode. Using the screen-priinting technology, the insulation slurry was prepared on the bar anode electrode surface to form the anode separate layer. So the discrete anode sub-pixels layer structure was developed. For the vacuum-selaed FED device, the typical field emission characteristics were measured and the displayed dot matrix image was also presented. The fabricated FED device with discrete anode sub-pixel layer possessed higher dispaly image brightness, good image disnlay performance and better field emission characteristics.

Fabrication Research and Property of Double Cold Cathode for the Field Emission Display Panel

2011 ◽  
Vol 186 ◽  
pp. 75-78
Author(s):  
Qiang Guo ◽  
Yu Kui Li
Keyword(s):  
Field Emission ◽  
Indium Tin Oxide ◽  
Cold Cathode ◽  
Field Emission Display ◽  
Ito Film ◽  
Screen Printing Technique ◽  
Printing Technique ◽  
Cathode Structure ◽  
The One ◽  
Photolithography Process

With the precise photolithography process and simple screen-printing technique, the double cold cathode structure was fabricated on the cathode plate. The indium tin oxide (ITO) film coated over the cathode plate surface was etched to form bar ITO stripes, which was used as the cathode electrode. The one ITO group was composed of two parallel bar ITO stripes, on which the screen-printed carbon nanotube paste was employed to form the field emitter. The covering layer was also fabricated by the solidified insulation slurry with the pre-determined patterns. The phosphor prepared on the anode plate was utilized to form the panel image. The sealed field emission display panel with double cold cathode structure showed high panel luminous brightness, better field emission characteristics and good emission uniformity.

Fabrication and Properties of the Backlight Field Emission Unit with Meshy Bottom Electrode

2011 ◽  
Vol 204-210 ◽  
pp. 152-155
Author(s):  
Chao Wu ◽  
Wen Jie Zhang
Keyword(s):  
Field Emission ◽  
Indium Tin Oxide ◽  
Bottom Electrode ◽  
Soda Lime ◽  
Oxide Thin Film ◽  
Soda Lime Glass ◽  
Field Emission Properties ◽  
Manufacture Process ◽  
Substrate Plate ◽  
Photolithography Process

Carbon nanotubes (CNTs) had good field emission ability and were adopted to form the cold cathode. The backlight field emission unit (BFEU) with CNTs as field emitter was designed and fabricated, and the detailed manufacture process was also given. The flat soda-lime glass was used as substrate plate. With the photolithography process, the indium tin oxide thin film covered on the cathode plate surface was divided into bar stripes to form the meshy bottom electrode for improving the field emission properties of CNT emitters. The sealed BFEU demonstrated better field emission performance, high luminance brightness. With the simple fabrication process, the total manufacture cost was also low.

scholarly journals Performance of GaN-Based LEDs with Nanopatterned Indium Tin Oxide Electrode

2016 ◽  
Vol 2016 ◽  
pp. 1-7
Author(s):  
Zhanxu Chen ◽  
Wenjie Liu ◽  
Wei Wan ◽  
Gengyan Chen ◽  
Yongzhu Chen ◽  
...  
Keyword(s):  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Ohmic Contacts ◽  
Three Dimensional ◽  
Light Output ◽  
Light Extraction Efficiency ◽  
Experimental Result ◽  
Indium Tin Oxide Electrode ◽  
Light Emitting ◽  
Ito Electrode

The indium tin oxide (ITO) has been widely applied in light emitting diodes (LEDs) as the transparent current spreading layer. In this work, the performance of GaN-based blue light LEDs with nanopatterned ITO electrode is investigated. Periodic nanopillar ITO arrays are fabricated by inductive coupled plasma etching with the mask of polystyrene nanosphere. The light extraction efficiency (LEE) of LEDs can be improved by nanopatterned ITO ohmic contacts. The light output intensity of the fabricated LEDs with nanopatterned ITO electrode is 17% higher than that of the conventional LEDs at an injection current of 100 mA. Three-dimensional finite difference time domain simulation matches well with the experimental result. This method may serve as a practical approach to improving the LEE of the LEDs.

Characterization of electrocatalytic proton reduction and surface adsorption of platinum nanoparticles supported by a polymeric stabilizer on an ITO electrode

2022 ◽  
Author(s):  
Yuta Tsubonouchi ◽  
Masashi Kajita ◽  
Taichi Hayasaka ◽  
Hamada S. A. Mandour ◽  
Mohamed R Berber ◽  
...  
Keyword(s):  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Platinum Nanoparticles ◽  
Colloidal Solution ◽  
Surface Adsorption ◽  
Chemical Adsorption ◽  
Proton Reduction ◽  
Ito Electrode ◽  
Polymeric Stabilizer

Platinum nanoparticles (PAA-Pt) stabilized by polyacrylic acid (PAA) of a polymeric stabilizer were adsorbed on an indium tin oxide (ITO) surface from their colloidal solution due to the chemical adsorption...

scholarly journals Electrochemical Impedance Characterization of Cell Growth on Reduced Graphene Oxide–Gold Nanoparticles Electrodeposited on Indium Tin Oxide Electrodes

2019 ◽  
Vol 9 (2) ◽  
pp. 326 ◽  
Author(s):  
Somasekhar Chinnadayyala ◽  
Jinsoo Park ◽  
Yonghyun Choi ◽  
Jae-Hee Han ◽  
Ajay Yagati ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Graphene Oxide ◽  
Cell Growth ◽  
Reduced Graphene Oxide ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Electrochemical Impedance ◽  
Hek293 Cells ◽  
Ito Electrode ◽  
Reduced Graphene

The improved binding ability of graphene–nanoparticle composites to proteins or molecules can be utilized to develop new cell-based assays. In this study, we fabricated reduced graphene oxide–gold nanoparticles (rGO-AuNP) electrodeposited onto a transparent indium tin oxide (ITO) electrode and investigated the feasibility of the electrochemical impedance monitoring of cell growth. The electrodeposition of rGO–AuNP on the ITO was optically and electrochemically characterized in comparison to bare, rGO-, and AuNP-deposited electrodes. The cell growth on the rGO–AuNP/ITO electrode was analyzed via electrochemical impedance measurement together with the microscopic observation of HEK293 cells transfected with a green fluorescent protein expression vector. The results showed that rGO–AuNP was biocompatible and induced an increase in cell adherence to the electrode when compared to the bare, AuNP-, or rGO-deposited ITO electrode. At 54 h cultivation, the average and standard deviation of the saturated normalized impedance magnitude of the rGO–AuNP/ITO electrode was 3.44 ± 0.16, while the value of the bare, AuNP-, and rGO-deposited ITO electrode was 2.48 ± 0.15, 2.61 ± 0.18, and 3.01 ± 0.25, respectively. The higher saturated value of the cell impedance indicates that the impedimetric cell-based assay has a broader measurement range. Thus, the rGO–AuNP/ITO electrode can be utilized for label-free and real-time impedimetric cell-based assays with wider dynamic range.

Sign in / Sign up

Export Citation Format

Share Document