Rock’s Acoustic Emission and Damage Deformation Characteristic in Uniaxial Compression Condition

2012 ◽  
Vol 170-173 ◽  
pp. 486-491 ◽  
Author(s):  
Zi Hong Guo ◽  
Qian Tao ◽  
Bao Xian Liu ◽  
Chao Luo ◽  
Li Meng ◽  
...  
Keyword(s):  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Deformation Characteristic ◽  
Constitutive Models ◽  
Emission Characteristic ◽  
Uniaxial Compression Test ◽  
Strength Based ◽  
Damage Constitutive Model ◽  
Set Up ◽  
Ae Counts

Rock’s uniaxial compression test is completed and the datum is analyzed, then relationship between loading time and AE amplitude, AE counts sum, AE total energy’s released rate come out. Rock’s critical damage is defined which equal result of one minus ratios of residual strength to critical strength. Based on strain equivalence discipline, damage constitutive models related with acoustic emission characteristic are set up. With damage constitutive models established with AE counts sum and AE total energy serving as damage variables respectively and testing datum, the relationship between rock’s damage and stress and strain is described. Then conclusions come out: 1) damage constitutive model with AE counts sum serving as damage variable manifest rock’s damage increasing process and accords with testing result better; 2) theoretical curve is well consistent with testing curve at rock’s peak strength zone.

Experimental Research on Acoustic Emission of Granite under Uniaxial Compression and Splitting Tensile

2012 ◽  
Vol 232 ◽  
pp. 24-27
Author(s):  
Zong Zhan Li ◽  
Jun Lin Tao ◽  
Yi Li
Keyword(s):  
Compressive Strength ◽  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Uniaxial Compressive Strength ◽  
Loading Rate ◽  
Testing Machine ◽  
Peak Stress ◽  
Uniaxial Compression Test ◽  
Peak Strain ◽  
Ae Energy

This paper makes the acoustic emission of granite under uniaxial compression and splitting tensile test by electro-hydraulic testing machine and AE .We studied the relationship of uniaxial compressive strength and splitting tensile strength with the loading rate and AE characteristics of granite .The results show that uniaxial compressive strength and peak strain raise with loading rate, the AE energy gradually increases and get maximum in the 30% of the peak stress in the process of uniaxial compression test, and in the splitting tensile AE energy generates in the initial loading and gets maximum when the granite brittle fracture.

Uniaxial Compression with Acoustic Emission Experimental Study on Rock Damage Process

2012 ◽  
Vol 204-208 ◽  
pp. 173-176
Author(s):  
Jing Hong Liu ◽  
Xiao Hua Liu ◽  
Wen Han
Keyword(s):  
Acoustic Emission ◽  
Crack Propagation ◽  
Uniaxial Compression ◽  
Failure Process ◽  
Structure Stability ◽  
Uniaxial Compression Test ◽  
Concrete Material ◽  
Deformation And Failure ◽  
Disaster Assessment ◽  
Contrast Analysis

Acoustic emission technique is an important technique for monitoring crack propagation and failure process of rock, coal and concrete material. A uniaxial compression test with acoustic emission monitoring on coal and rock samples’ deformation and failure process were carried out. Failure precursor information of rock, coal and concrete material were studied through contrast analysis the experiment result include acoustic emission signals, strain, load correlation of sample inner crack propagation to failure process. The test provided necessary data to further understand on rock burst failure disaster. The test result provides a theoretical basis for further application of acoustic emission for prediction coal rock dynamic disaster, assessment rock and concrete structure stability and study rock concrete material failure process mechanism.

Study on Acoustic Emission and Failure Modes of Rock in Uniaxial Compression Test

2011 ◽  
Vol 261-263 ◽  
pp. 1393-1400
Author(s):  
Ji Liang Zhang ◽  
Chang Hong Li
Keyword(s):  
Compressive Strength ◽  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Compression Test ◽  
Failure Modes ◽  
Soft Rock ◽  
Development Stage ◽  
Uniaxial Compression Test ◽  
Whole Process ◽  
Shear Rupture

Based on uniaxial compression test, the mechanical properties and acoustic emission characteristics of rock had been obtained, including the relationship between AE and time, AE and stress level, and so on, in the whole process of rock failure. Research shows AE rate of rock has the subparagraph features obviously. There are three obvious AE sections for the higher strength elastic-brittle rock: First section is compaction stage, corresponding stress is 10% of compressive strength of rock; Second section is crack-development stage, corresponding stress is 80% of compressive strength; Third section is rupture stage, corresponding stress is the compressive strength. Furthermore, AE signals for the rupture stage is strongest. The law is still correct in cycle loading conditions. However, the subparagraph phenomenon isn’t clear for elastic-plastic rock, and the AE peak is lagging behind the ultimate strength of rock, the AE signal in the decline stage of strength is the most intensive and strong. The lagging phenomenon is due to X-shear rupture model of soft rock. The significant stress concentration in cone tip between the two relative extrusion cones leads to local rock broken seriously. Then, many acoustic signals have been observed.

scholarly journals A Creep Damage Constitutive Model for a Rock Mass with Nonpersistent Joints under Uniaxial Compression

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Shuran Lv ◽  
Wanqing Wang ◽  
Hongyan Liu
Keyword(s):  
Rock Mass ◽  
Constitutive Model ◽  
Mechanical Behavior ◽  
Uniaxial Compression ◽  
Damage Model ◽  
Creep Damage ◽  
Model Parameters ◽  
Damage Constitutive Model ◽  
Set Up ◽  
Creep Damage Model

As part of the rock mass, both the mesoscopic and macroscopic flaws will affect the creep mechanical behavior of the rock mass with nonpersistent joints. This study focuses on this kind of rock mass and establishes a creep damage model to account for the effect of the joint on its creep mechanical behavior. First, on basis of analyzing the rock element creep mechanism and the typical creep deformation curve, a new creep damage constitutive model for the rock element is set up by introducing the damage theory and Kachanov damage evolution law into the classic creep constitutive model such as J body model. Second, the determination method of the proposed model parameters is studied in detail. Third, the calculation method of the macroscopic damage caused by the joint proposed by others is introduced which can consider the joint geometry, strength, and deformation parameters at the same time. Finally, the creep damage model for the rock mass with nonpersistent joints under uniaxial compression is proposed. The calculation examples indicate that it can present the effect of the joint on the rock mass creep mechanical behavior.

scholarly journals Mechanical Properties of Bump-Prone Coal with Different Porosities and Its Acoustic Emission-Charge Induction Characteristics under Uniaxial Compression

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Xin Ding ◽  
Xiaochun Xiao ◽  
Xiangfeng Lv ◽  
Di Wu ◽  
Jun Xu
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Quantitative Description ◽  
Volumetric Strain ◽  
Geological Structure ◽  
Uniaxial Compression Test ◽  
Theoretical Derivation ◽  
Initial Damage ◽  
Charge Induction

Discreteness of mechanical property affected by the intimal damage, which emerged with various degrees of material composition and geological structure, is the difference in porosity macroscopically. Although various porosities directly affect fracture activity, damage evolution and mechanical behaviour of coal bring on the bump-prone assessment error, and disaster happened “ahead of time” in deep underground energy source exploration, little research to date has focused on them. In this paper, the mechanical properties of bump-prone coal samples with different porosities were studied by uniaxial compression test and the initial damage caused by gangue and organic fracture in coal observed by CT. The result indicated that the evolution of coal strength and the logarithm of porosity were expressed by a linear negative correlation and the elastic modules decreased with the initial damage increased. A new quantitative description of damage variables is established by theoretical derivation to reflect the process of cracks formation and expiation in coal, based on volumetric strain and initial porosity. According to the Mohr–Coulomb principle, the effective stress of coal sample with higher the porosity is more likely to reach the shear strength and destruction. The amplitudes and accumulation of AE energy and charge pulse indeed vary with the stress loading stages and strength. The frequency of AE waveform is dominated in three bands (1∼50 kHz, 100∼150 kHz, and 175∼200 kHz) and that of charge induction had one frequency band 1∼100 Hz, and the amplitudes of time domain and main frequency components increased with stress improved. Both of them originated from cracks and belong to homologous signals, crack development bound to be accompanied by stress wavelet, not necessarily free charge; meanwhile, charge pulse being emerged means there must be cracks interaction and the acoustic emission signals are generated prior to charge induction.

Mechanical and Acoustic Emission Characteristics of Limestone after High Temperature

2012 ◽  
Vol 446-449 ◽  
pp. 23-28
Author(s):  
Gang Wu ◽  
De Yong Wang
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
High Temperature ◽  
Strain Curve ◽  
Peak Stress ◽  
Mechanical Parameter ◽  
Emission Characteristic ◽  
Uniaxial Compression Test ◽  
Peak Strain ◽  
Different Temperatures

The mechanical properties and acoustic emission evolution process of limestone under the action of high temperature load were investigated by combining methods of uniaxial compression test and acoustic emission (AE) technique. The temperature varies in the range of 100, 200, 400, 600 and 800°C. By analysis of AE parameters and the mechanical parameter, the relations of stress-time (strain)-accumulative counts of AE, stress-time (strain)-AE rates under different temperatures are analyzed. The results show that the temperature does not obviously affect the mechanical properties of limestone at the temperature ranging from 100 to 400°C, the accumulative ring-down counts and accumulative energy increase with the rise of temperature. However, when the temperature is above 400°C, the mechanical properties of limestone deteriorate rapidly with the increase of temperature, and also the peak stress of limestone decrease in different extents. In the meantime, the accumulative ring-down counts decrease coupled with the change of mechanical parameter. The brittle fracture is main failure mode of limestone when the temperature is below 800°C and the change of peak strain of limestone is unobvious. The stress-strain curve conforms to the acoustic emission curve which shows that changes of minerals formation and microstructure due to high temperature result in the changes of mechanical and acoustic emission characteristic of limestone.

Sign in / Sign up

Export Citation Format

Share Document