Optimization Design of Cantilever Supporting Structure

2013 ◽  
Vol 357-360 ◽  
pp. 2410-2413
Author(s):  
Wei Xu ◽  
Jian Sheng Feng ◽  
Fei Fei Feng
Keyword(s):  
Genetic Algorithm ◽  
Optimization Design ◽  
Design Method ◽  
Optimal Solution ◽  
Optimization Method ◽  
Original Design ◽  
Supporting Structure ◽  
Primary Object ◽  
Design Variables ◽  
Optimum Solution

The primary object of this fundamental research is to reveal the application of genetic algorithm improved on the optimization design of cantilever supporting structure. In order to meet the strength of pile body and pile top displacement as well as design variables subjected to constraint, an algorithm is carried on to seek the optimum solution and relevant examples by means of comprehensively considering the effects on center-to-center spacing between piles,pile diameter and quantity of distributed steel, which is taken the lowest engineering cost as objective function. Through the comparison of the optimized scheme and original design, this fruitful work provides explanation to the effectiveness of genetic algorithm in optimization design. These findings of the research lead to the conclusion that the shortcomings of traditional design method is easy to fall into local optimal solution. The new optimization method can overcome this drawback.

Genetic algorithm-based optimization design method of the Formula SAE racing car’s rear wing

2017 ◽  
Vol 232 (7) ◽  
pp. 1255-1269 ◽  
Author(s):  
Hui Wang ◽  
Qiuyang Bai ◽  
Xufei Hao ◽  
Lin Hua ◽  
Zhenghua Meng
Keyword(s):  
Genetic Algorithm ◽  
Optimization Design ◽  
Design Method ◽  
Optimal Solution ◽  
Optimization Procedure ◽  
Formula Sae ◽  
Design Variables ◽  
Rear Wing ◽  
Sample Points ◽  
Lift And Drag

The aerodynamic devices play an important role on the performance of the Formula SAE racing car. The rear wing is the most significant and popular element, which offers primary down force and optimizes the wake. In traditional rear wing optimization, the optimization variables are first selected, and separately enumerated according to the analyzing experience of the racing car’s external flow field, and thus the optimal design is chosen by comparison. This method is complicated, and even might lose some key sample points. In this paper, the attack angle of the rear wing and the relative position parameters are set as design variables; then the design variables’ combination is determined by the DOE experimental design method. The aerodynamic lift and drag of the racing car for these variables’ combinations are obtained by the computational fluid dynamics method. With these sample points, the approximation model is produced by the response surface method. For the sake of gaining the best lift to drag ( FL/ FD) ratio, i.e. maximum down force and the minimum drag force, the optimal solution is found by the genetic algorithm. The result shows that the established optimization procedure can optimize the rear wing’s aerodynamic characteristic on the racing car effectively and have application values in the practical engineering.

scholarly journals A Comprehensive Optimization Design Method of Aerodynamic, Acoustic, and Stealth of Helicopter Rotor Blades Based on Genetic Algorithm

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Mingxu Yi ◽  
Yalin Pan ◽  
Jun Huang ◽  
Lifeng Wang ◽  
Dawei Liu
Keyword(s):  
Genetic Algorithm ◽  
Optimization Design ◽  
Design Method ◽  
Integrated Design ◽  
Optimization Method ◽  
Rotor Blades ◽  
Helicopter Rotor ◽  
Optimization Approach ◽  
Design Variables ◽  
Helicopter Rotor Blades

In this paper, a comprehensive optimization approach is presented to analyze the aerodynamic, acoustic, and stealth characteristics of helicopter rotor blades in hover flight based on the genetic algorithm (GA). The aerodynamic characteristics are simulated by the blade element momentum theory. And the acoustics are computed by the Farassat theory. The stealth performances are calculated through the combination of physical optics (PO) and equivalent currents (MEC). Furthermore, an advanced geometry representation algorithm which applies the class function/shape function transformation (CST) is introduced to generate the airfoil coordinates. This method is utilized to discuss the airfoil shape in terms of server design variables. The aerodynamic, acoustic, and stealth integrated design aims to achieve the minimum radar cross section (RCS) under the constraint of aerodynamic and acoustic requirement through the adjustment of airfoil shape design variables. Two types of rotor are used to illustrate the optimization method. The results obtained in this work show that the proposed technique is effective and acceptable.

An Optimization Design Method of Geometric Parameters of Skid Shoe Referring to Subject Weight of Marine Structures

2014 ◽  
Vol 678 ◽  
pp. 325-332
Author(s):  
Feng Yan Yang ◽  
Xiang Zhen Yan ◽  
Zheng Rong Song ◽  
Ming Wang Yang ◽  
Zi Kun Zhao ◽  
...  
Keyword(s):  
Optimization Design ◽  
Design Method ◽  
Plate Thickness ◽  
Optimization Method ◽  
Geometric Parameters ◽  
Frame Structure ◽  
Complex Method ◽  
Optimized Design ◽  
Original Design ◽  
Marine Structures

The optimization design method of geometric parameters of skid shoe which is used to subject weight of marine structures is proposed. Considering skid shoe as steel frame structure, total weight and the bearing capacity of the skid shoe are selected as optimal objectives, and geometric parameters of the skid shoe are taken as design variables. Taking the strength, stiffness, local stability of the skid shoe as the constraint conditions, multi-objectives constraints optimization model of geometric parameters is established, and solved based on complex method. According to research results, a computer program has been developed using VC language. Then geometric optimum parameters of skid shoe in service of CNOOC are analyzed by the program. The results show that optimized design decreases steel volume, steel plate thickness by 28.7%, 18.4%, respectively, compared with original design. The optimization method has a series of advantages, such as simple model, fast calculating speed, high calculation accuracy.

The Optimization Design of Wind Turbine Gearbox Based on Improved Genetic Algorithm and Feasibility Analysis

2014 ◽  
Vol 889-890 ◽  
pp. 107-112
Author(s):  
Ji Ming Tian ◽  
Xin Tan
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbine ◽  
Optimization Design ◽  
Optimal Solution ◽  
Optimization Method ◽  
Strength Analysis ◽  
Improved Genetic Algorithm ◽  
Global Optimal Solution ◽  
Wind Turbine Gearbox ◽  
Global Optimal

The design of the gearbox must ensure the simplest structure and the lightest weight under the premise of meeting the reliability and life expectancy. According to the requirement of wind turbine, an improved method combined dynamic penalty function with pseudo-parallel genetic algorithm is used to optimize gearbox. It takes the minimum volumes as object functions. It is showed that the ability to search the global optimal solution of improved genetic algorithm and less number of iterations. The global optimal solution is worked out quickly. The size parameters are optimized, as much as the driving stability and efficiency. To verify the feasibility of improved genetic algorithm, ring gear of the gearbox is analyzed. Static strength analysis shows that the optimization method is reasonable and effective.

Study on Optimization Design of a Hoist Roller

2011 ◽  
Vol 415-417 ◽  
pp. 460-463
Author(s):  
Li Liu ◽  
Hong Xia Liu
Keyword(s):  
Optimization Design ◽  
Design Method ◽  
Plate Thickness ◽  
Optimization Method ◽  
Practical Significance ◽  
Application Software ◽  
Side Plate ◽  
Design Variables ◽  
Programming Software ◽  
Set Up

In the design of wrapping hoist, the roller strength is always a larger problem. In this paper, diameter, wall thickness and side plate thickness of the roller were selected as design variables, and volume of the roller acts as object function. Through analyzing its inner stresses, the mechanical model and mathematical model were set up. Adopting the optimization method of covering complex and VB programming software, an application software of a hoist roller optimization design was got. An example is used to verify correctness and practicability of the software. This optimization design method has practical significance on reducing the weight and material of a hoist roller.

Optimization, design and testing for morphing leading edge

2020 ◽  
pp. 095440622094188
Author(s):  
Yu Yang ◽  
Zhigang Wang ◽  
Binwen Wang ◽  
Shuaishuai Lyu
Keyword(s):  
Optimization Design ◽  
Design Method ◽  
Leading Edge ◽  
Optimization Method ◽  
Collaborative Optimization ◽  
Noise Abatement ◽  
Deformation Control ◽  
Design Variables ◽  
Weight Penalty

Wing's morphing leading edge, drooping in a seamless way, has significant potential for noise abatement and drag reduction. Innovative design methods for compliant skin and internal actuating mechanism, respectively, are proposed and validated through a mockup in this paper. For the skin, a collaborative optimization method is presented, which takes all design variables, continuous and discrete, into account simultaneously. Moreover, to overcome the drawback of conventional algorithm, which is insufficient for deformation control in critical regime, weight penalty is imposed on present objective function. On the other hand, an internal kinematic actuating mechanism is designed from an improved concept, of which positions of level-rod hinges are optimized in a larger zone to fit the deflection requirement. The test of mockup validates the above methods, and excellent morphing quality of the compliant skin proves the advancement of the collaborative optimization method. However, the design method of internal actuating mechanism needs further improvement, and the error induced deteriorates the final morphing quality of the mockup.

Multidisciplinary Design Optimization of Small Canister-Launched Space Launch Vehicle Using Genetic Algorithm

2013 ◽  
Vol 302 ◽  
pp. 583-588 ◽  
Author(s):  
Fredy M. Villanueva ◽  
Lin Shu He ◽  
Da Jun Xu
Keyword(s):  
Genetic Algorithm ◽  
Design Optimization ◽  
Multidisciplinary Design Optimization ◽  
Optimal Solution ◽  
Optimization Method ◽  
Launch Vehicle ◽  
Low Earth Orbit ◽  
Multidisciplinary Design ◽  
Optimization Approach ◽  
Design Variables

A multidisciplinary design optimization approach of a three stage solid propellant canister-launched launch vehicle is considered. A genetic algorithm (GA) optimization method has been used. The optimized launch vehicle (LV) is capable of delivering a microsatellite of 60 kg. to a low earth orbit (LEO) of 600 km. altitude. The LV design variables and the trajectory profile variables were optimized simultaneously, while a depleted shutdown condition was considered for every stage, avoiding the necessity of a thrust termination device, resulting in reduced gross launch mass of the LV. The results show that the proposed optimization approach was able to find the convergence of the optimal solution with highly acceptable value for conceptual design phase.

Multi-Objective Aerodynamic Optimization of Axial Turbine Blades Using a Novel Multilevel Genetic Algorithm

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Özhan Öksüz ◽  
İbrahim Sinan Akmandor
Keyword(s):  
Genetic Algorithm ◽  
Gas Turbine ◽  
Design Method ◽  
Turbine Blades ◽  
Optimization Method ◽  
Navier Stokes ◽  
Test Cases ◽  
Aerodynamic Optimization ◽  
Multi Objective ◽  
Design Variables

In this paper, a new multiploid genetic optimization method handling surrogate models of the CFD solutions is presented and applied for a multi-objective turbine blade aerodynamic optimization problem. A fast, efficient, robust, and automated design method is developed to aerodynamically optimize 3D gas turbine blades. The design objectives are selected as maximizing the adiabatic efficiency and torque so as to reduce the weight, size, and cost of the gas turbine engine. A 3D steady Reynolds averaged Navier–Stokes solver is coupled with an automated unstructured grid generation tool. The solver is verified using two well-known test cases. The blade geometry is modeled by 36 design variables plus the number of blade variables in a row. Fine and coarse grid solutions are respected as high- and low-fidelity models, respectively. One of the test cases is selected as the baseline and is modified by the design process. It was found that the multiploid multi-objective genetic algorithm successfully accelerates the optimization and prevents the convergence with local optimums.

scholarly journals Optimization Design of I-Type Plastic Extrusion Die Based on Flow Balance

2014 ◽  
Vol 8 (1) ◽  
pp. 694-698 ◽  
Author(s):  
Hai-Feng Fang ◽  
Li-Hua Cai ◽  
Ming-Qiang Wang ◽  
Qi Wang ◽  
De-Fang He
Keyword(s):  
Flow Velocity ◽  
Optimization Design ◽  
Design Method ◽  
Optimization Method ◽  
Mean Flow ◽  
Transition Section ◽  
Average Flow Velocity ◽  
Advantages And Disadvantages ◽  
Extrusion Die ◽  
Design Variables

With the I-type plastic extrusion die for example, the advantages and disadvantages between the traditional design method and optimization design method were compared. The design was studied via finite element numeric analysis combined with optimization, whose objective was the equal average flow velocity of each sub-field of profile cross section at extrusion die. And the optimization design was studied by tacking the thickness of the entrance of transition section and the sectional dimension of forming section as the design variables. An example was provided to illustrate the optimization method proposed above. Results showed that the flow nonuniformity index could be reduced almost 9% and the mean flow velocity could be improved 28% by optimizing the design variables such as the thickness of the entrance of transition section and the sectional dimension of forming section.

An Integrated Optimization Design Method Based on Surrogate Modeling Applied to Diverging Duct Design

2016 ◽  
Vol 33 (4) ◽  
Author(s):  
Lu Hanan ◽  
Li Qiushi ◽  
Li Shaobin
Keyword(s):  
Genetic Algorithm ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Optimization Design ◽  
Design Method ◽  
Uniform Design ◽  
Qualitative Variable ◽  
Integrated Optimization ◽  
Design Variables ◽  
Integrated Optimization Design

AbstractThis paper presents an integrated optimization design method in which uniform design, response surface methodology and genetic algorithm are used in combination. In detail, uniform design is used to select the experimental sampling points in the experimental domain and the system performance is evaluated by means of computational fluid dynamics to construct a database. After that, response surface methodology is employed to generate a surrogate mathematical model relating the optimization objective and the design variables. Subsequently, genetic algorithm is adopted and applied to the surrogate model to acquire the optimal solution in the case of satisfying some constraints. The method has been applied to the optimization design of an axisymmetric diverging duct, dealing with three design variables including one qualitative variable and two quantitative variables. The method of modeling and optimization design performs well in improving the duct aerodynamic performance and can be also applied to wider fields of mechanical design and seen as a useful tool for engineering designers, by reducing the design time and computation consumption.

Sign in / Sign up

Export Citation Format

Share Document