Analysis on Aerodynamic Performance of Horizontal Axis Wind Turbine Based on Nonlinear Wake Model

2013 ◽  
Vol 448-453 ◽  
pp. 1716-1720
Author(s):  
Rui Yang ◽  
Jiu Xin Wang ◽  
Sheng Long Zhang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Optimization Design ◽  
Aerodynamic Performance ◽  
Horizontal Axis ◽  
Wake Vortex ◽  
Horizontal Axis Wind Turbine ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model ◽  
Induced Velocity

A computational method based on nonlinear wake model was established for horizontal axis wind turbines aerodynamic performance prediction. This method makes use of finite difference method to solve the integral differential equation of the model, the induced velocity of wake vortex can be calculated from equations and compared with the induced velocity of wake vortex in linear model. The comparison between the calculated results of wind turbine under axis flow condition, including tip vortex geometry and aerodynamic performance, and available experimental data shows that this method is suitable for wind turbine aerodynamic performance analysis. Finally, a series of numerical calculations were made to investigate the change of wake geometry and aerodynamic performance of the wind turbine when yawing and pitch angle increasing, which provide foundations for aerodynamic optimization design of horizontal axis wind turbines.

scholarly journals A Modified Free Wake Vortex Ring Method for Horizontal-Axis Wind Turbines

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3900 ◽  
Author(s):  
Jing Dong ◽  
Axelle Viré ◽  
Carlos Simao Ferreira ◽  
Zhangrui Li ◽  
Gerard van Bussel
Keyword(s):  
Wind Turbine ◽  
Vortex Ring ◽  
Horizontal Axis ◽  
Wake Vortex ◽  
Horizontal Axis Wind Turbine ◽  
Vortex Model ◽  
Ring Method ◽  
Wake Model ◽  
Free Wake ◽  
Platform Motions

A modified free-wake vortex ring model is proposed to compute the dynamics of a floating horizontal-axis wind turbine, which is divided into two parts. The near wake model uses a blade bound vortex model and trailed vortex model, which is developed based on vortex filament method with straight lifting lines assumption. By contrast, the far wake model is based on the vortex ring method. The proposed model is a good compromise between accuracy and computational cost, for example when compared with more complex vortex methods. The present model is used to assess the influence of floating platform motions on the performance of a horizontal-axis wind turbine rotor. The results are validated on the 5 MW NREL rotor and compared with other aerodynamic models for the same rotor subjected to different platform motions. The results show that the proposed method is reliable. In addition, the proposed method is less time consuming and has similar accuracy when comparing with more advanced vortex based methods.

scholarly journals Observation of the Starting and Low Speed Behavior of Small Horizontal Axis Wind Turbine

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Sikandar Khan ◽  
Kamran Shah ◽  
Izhar-Ul-Haq ◽  
Hamid Khan ◽  
Sajid Ali ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Starting Time ◽  
Speed Range ◽  
Horizontal Axis Wind Turbines ◽  
Starting Torque ◽  
High Angles Of Attack

This paper describes the starting behavior of small horizontal axis wind turbines at high angles of attack and low Reynolds number. The unfavorable relative wind direction during the starting time leads to low starting torque and more idling time. Wind turbine models of sizes less than 5 meters were simulated at wind speed range of 2 m/s to 5 m/s. Wind turbines were modeled in Pro/E and based on the optimized designs given by MATLAB codes. Wind turbine models were simulated in ADAMS for improving the starting behavior. The models with high starting torques and less idling times were selected. The starting behavior was successfully improved and the optimized wind turbine models were able to produce more starting torque even at wind speeds less than 5 m/s.

scholarly journals Establishing a robust testing approach for displacement measurement on a rotating horizontal-axis wind turbine

2018 ◽  
Vol 3 (1) ◽  
pp. 301-311
Author(s):  
Nadia Najafi ◽  
Allan Vesth
Keyword(s):  
Wind Turbine ◽  
Camera Calibration ◽  
Wind Turbines ◽  
Calibration Method ◽  
Horizontal Axis ◽  
Tracking Algorithm ◽  
Displacement Measurement ◽  
Horizontal Axis Wind Turbine ◽  
Damage And Failure ◽  
Horizontal Axis Wind Turbines

Abstract. Health monitoring by conventional sensors like accelerometers or strain gauges becomes challenging for large rotating structures due to the issues with feasibility, sensing and data transmission. In addition, acceleration measurements have low capability of presenting very small frequencies, which happen very often for large structures (for instance, frequencies between 0.2 and 0.5 Hz in horizontal-axis wind turbines). By contrast, displacement measurement using stereo vision is rapid, non-contacting and distributed over the structure. The sensors are cheaper and more easily applied to many places on the object to be measured. Horizontal-axis wind turbines are one of the most important large rotating structures and need to be measured and monitored in time to prevent damage and failure, and the blade tip position is one of the key parameters to measure in order to prevent the blade hitting the turbine tower. This paper presents a clearly described and easily applicable procedure for measuring the displacement on the components of a rotating horizontal-axis wind turbine with stereophotogrammetry. Paper markers have been applied on the rotor and tower of a scaled-down horizontal-axis wind turbine model in the workshop and the displacement measurement method has been demonstrated by measuring displacement during operation. The method is mainly developed in two parts: (1) camera calibration and (2) tracking algorithm. We introduce an efficient camera calibration method for measurement in large fields of view, which has always been a challenge. This method is easy and practical and offers better accuracy compared with 2-D traditional camera calibration. The tracking algorithm also works successfully and is able to track the points during rotation within the measurement time. Finally, the accuracy analysis has been conducted and has shown better accuracy of the new calibration method compared with 2-D traditional camera calibration.

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

2021 ◽  
Author(s):  
Poornima Menon ◽  
Srinivas G
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Performance Enhancement ◽  
Horizontal Axis ◽  
Horizontal Wind ◽  
Horizontal Axis Wind Turbine ◽  
Ansys Fluent ◽  
Horizontal Axis Wind Turbines ◽  
Design Requirements ◽  
Nrel Phase Vi

Abstract Wind turbines are one of the most prominent and popular sources of renewable energy, of which, horizontal axis wind turbines (HAWT) are the majorly chosen design for wind machines. These turbines rotate about the horizontal axis which is parallel to the ground. They comprise of aerodynamic blades (generated from the desired airfoil), that may be twisted or tapered as per the design requirements. The blades are attached to a rotor which is located either upwind or downwind. To help wind the orientation of the turbines, the upwind rotors have a tail vane, while the downwind rotors are coned which in turn help them to self-orient. One of the major reasons for the popularity of the horizontal wind turbine, is its ability to generate a larger amount of electricity for a given amount of wind. Due to its popularity, the enhancement in the design of HAWTs, is a major focus area for research. In the present study, a scaled-down CFD model of the NREL Phase VI was validated against the numerical and experimental data. The model used had a dual blade rotor and applied the S809 airfoil. The simulations were carried out using a rotating mesh in ANSYS Fluent. Validation was carried out for 3 velocities — 7m/s, 10m/s and 20m/s. Once validation was carried out, turbine was modified with the addition of vortex generators, in the form of cylindrical protrusions that reduce flow separation.

Aerodynamic Performance of a Small Horizontal Axis Wind Turbine

2012 ◽  
Vol 134 (2) ◽  
Author(s):  
Maryam Refan ◽  
Horia Hangan
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
High Speed ◽  
Aerodynamic Performance ◽  
Horizontal Axis ◽  
Power Prediction ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Wide Range ◽  
Bem Theory

The aerodynamic performance of an upwind, three-bladed, small horizontal axis wind turbine (HAWT) rotor of 2.2 m in diameter was investigated experimentally and theoretically in order to assess the applicability of the blade element momentum (BEM) theory for modeling the rotor performance for the case of small HAWTs. The wind turbine has been tested in the low and high speed sections of the Boundary Layer Wind Tunnel 2 (BLWT2) at the University of Western Ontario (UWO) in order to determine the power curve over a wide range of wind speeds. Afterward, the BEM theory has been implemented to evaluate the rotor performance and to investigate three-dimensionality effects on power prediction by the theory. Comparison between the theoretical and experimental results shows that the overall prediction of the theory is within an acceptable range of accuracy. However, the BEM theory prediction for the case of small wind turbines is not as accurate as the prediction for larger wind turbines.

Robust Design of Horizontal Axis Wind Turbines Using Taguchi Method

2015 ◽  
Author(s):  
Singiresu S. Rao
Keyword(s):  
Taguchi Method ◽  
Wind Turbine ◽  
Robust Design ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Parameter Design ◽  
Energy Output ◽  
Horizontal Axis Wind Turbine ◽  
Momentum Theory ◽  
Horizontal Axis Wind Turbines

The robust design of horizontal axis wind turbines, including both parameter and tolerance designs, is presented. A simple way of designing robust horizontal axis wind turbine systems under realistic conditions is outlined with multiple design variables, multiple objectives, and multiple constraints simultaneously by using the traditional Taguchi method and its extensions. The performance of the turbine is predicted using the axial momentum theory and the blade element momentum theory. In the parameter design stage, the energy output of the turbine is maximized using the Taguchi method and an extended penalty-based Taguchi method is proposed to solve constrained parameter design problems. Using an appropriate set of tolerance settings of the parameters, the tolerance design problem is formulated so as to yield an economical design while ensuring a minimal variability in the performance of the wind turbine. The present work provides a simple and economical approach for the robust optimal design of horizontal axis wind turbines.

A Modified Free-Wake Vortex Ring Model for the Aerodynamics of Floating Offshore Wind Turbines

2019 ◽  
Author(s):  
Jing Dong ◽  
Axelle Viré ◽  
Simao Ferreira ◽  
Zhangrui Li ◽  
Gerard van Bussel
Keyword(s):  
Wind Turbine ◽  
Vortex Ring ◽  
Horizontal Axis ◽  
Wake Vortex ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Vortex Model ◽  
Ring Model ◽  
Wake Model ◽  
Free Wake

Abstract A modified free-wake vortex ring model is proposed to compute the dynamics of a floating horizontal-axis wind turbine. The model is divided into two parts. The near wake model uses a blade bound vortex model and trailed vortex model, which is developed based on vortex filament method. By contrast, the far wake model is based on the vortex ring method. This is a good compromise between accuracy and computational cost. In this work, the model is used to assess the influence of floating platform motions on the performance of a horizontal-axis wind turbine rotor. The results are validated on the 5MW NREL rotor and compared with other vortex models for the same rotor subjected to different platform motions. It was found that the result from the proposed method are more reliable than the results from BEM theory especially at small angles of attack in the region of low wind speeds, on the one hand, and high wind speeds with blade pitch motions, on the other hand.

Effect of Wind Shear to Horizontal Axis Wind Turbine Aerodynamic

2014 ◽  
Vol 521 ◽  
pp. 99-103
Author(s):  
Ling Zhang ◽  
Hui Xia Sheng ◽  
Da Fei Guo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Shear ◽  
Numerical Study ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Power Calculation ◽  
Horizontal Axis Wind Turbine ◽  
Horizontal Axis Wind Turbines ◽  
And Performance

A three-dimensional unsteady numerical study of the streaming flow field of the1.2 MW horizontal axis wind turbines which operation in the 11.26 m/s under the uniform wind and the shear wind have been carried out in this paper. according to the simulation results to understand the effect of uniform flow and the dynamic wind shear flow to the output power of wind turbine and the aerodynamics. results showed that: Under the uniform wind,Wind turbine power calculation values are in good agreement with the design value ,Wind turbines under the influence of wind shear can lead to change in load and performance on the surface of the blade.

scholarly journals New System for the Acceleration of the Airflow in Wind Turbines

2019 ◽  
Vol 12 (2) ◽  
pp. 158-167
Author(s):  
Alejandro Alonso-Estébanez ◽  
Pablo Pascual-Muñoz ◽  
Felipe P. Alvarez Rabanal ◽  
Daniel Castro-Fresno ◽  
Juan J. Del Coz Díaz
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine ◽  
The Earth ◽  
Air Stream ◽  
Free Air ◽  
Prevailing Wind Direction ◽  
Horizontal Axis Wind Turbines ◽  
Wind Resource

Background: This patent is based on the wind industry technology called Diffuser Augmented Wind Turbines (DAWTs). This technology consists of a horizontal axis wind turbine, which is housed inside a duct with diverging section in the direction of the free air stream. In this paper, a review of preceding patents related to this technology is carried out. Objective: This paper presents an innovative patent to improve the performance of horizontal axis wind turbines. In particular, this system is aimed at improving the performance of those turbines that otherwise might not be installed due to the low wind resource existing at certain locations. Methods: The most innovative elements of this patent are: (1) the semi-spherical grooves, which are mechanized on the surface of the two diffusers in order to guarantee a more energetic boundary layer; (2) the coaxial diffuser, which is located downwind following the first diffuser in order to increase the suction effect on the air mass close to the inlet; (3) the coaxial rings located around the first diffuser outlet, which are used to deflect the external airflow toward the turbine wake; and (4), the selforientating system to orientate the system by the prevailing wind direction. Results: An application of the patent for increasing the power generated by a horizontal axis wind turbine with three blades is presented. The patent is designed and its performance is evaluated by using a Computational Fluid Dynamics code. The numerical results show that this system rises the airflow going through the rotor of the turbine. Conclusion: The patented device is an original contribution aimed at enabling a more profitable installation of wind turbines in places where the wind resource is insufficient because of the wind shear caused both by the proximity of the earth and the obstacles on the earth surface.

scholarly journals Aerodynamic performance simulation of three selected airfoils

2021 ◽  
Vol 25 (111) ◽  
pp. 201-211
Author(s):  
Mariana Montenegro Montero ◽  
Gustavo Richmond Navarro
Keyword(s):  
Renewable Energy ◽  
Turbulent Flow ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Aerodynamic Performance ◽  
Horizontal Axis ◽  
Wind Engineering ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Turbulence Effects

This work presents the lift and drag coefficient curves, as functions of the angle of attack, for the NACA0012, S809 and SG6043 airfoils in turbulent flow conditions. The objective is to identify the airfoil with the best aerodynamic performance under conditions that are descriptive of small scale wind turbine. With the use of OpenFOAM, an analysis was done by numerical simulation. In the case of the NACA0012 airfoil, it was found that the performance is insensitive to the changes in turbulence and the Reynold number. The aerodynamic response of the S809 airfoil is to increase both the drag and lift as the turbulence increases. The SG6043 airfoil responds the best out of the three in turbulent flow, given that the lift curves mostly increase with the turbulence. The curves reported in this work are new and not found in previous literature. Keywords: aerodynamics, lift, drag, turbulence References [1]R. Madriz-Vargas, A. Bruce, M. Watt, L. G. Mogollón and H. R. Álvarez, «Community renewable energy in Panama: a sustainability assessment of the “Bocade Lura” PV-Wind-Battery hybrid power system,» Renewable Energy and Environmental Sustainability, vol. 2, nº 18, pp. 1-7, 2017. https://doi.org/10.1051/rees/2017040. [2]S. Mertenes, «Wind Energy in the Built Environment, » Ph.D. dissertation. Multi-Science, Brentwood, 2006. [3]P. Giguere and M. S. Selig, «New airfoils for small horizontal axis wind turbines,» Journal of Solar Energy Engineering-transactions, vol. 120, pp. 108-114, 1988. https://doi.org/10.1115/1.2888052. [4]A. K. Wright and D. H. Wood, «The starting and low wind speed behaviour of a small horizontal axis wind turbine,» Journal of wind engineering and industrial aerodynamics, vol. 92, nº 14-15, pp. 1265-1279, 2004. https://doi.org/10.1016/j.jweia.2004.08.003. [5]G. Richmond-Navarro, M. Montenegro-Montero and C. Otárola, «Revisión de los perfiles aerodinámicos apropiados para turbinas eólicas de eje horizontal y de pequeña escala en zonas boscosas,» Revista Lasallista de Investigación, vol. 17, nº 1, pp. 233-251, 2020. https://doi.org/10.22507/rli.v17n1a22. [6]A. Tummala, R. K. Velamati, D. K. Sinha, V. Indraja and V. H. Krishna, «A review on small scale wind turbines, » Renewable and Sustainable Energy Reviews,vol. 56, pp. 1351-1371, 2016. https://doi.org/10.1016/j.rser.2015.12.027. [7]L. Pagnini, M. Burlando and M. Repetto, «Experimental power curve of small-size wind turbines in turbulent urban environment,» Applied Energy, vol. 154,pp. 112-121, 2015. https://doi.org/10.1016/j.apenergy. 2015.04.117. [8]W. D. Lubitz, «Impact of ambient turbulence on performance of a small wind turbine,» Renewable Energy, vol. 61, pp. 69-73, 2014. https://doi.org/10.1016/j.renene.2012.08.015. [9]P. Devinant, T. Laverne and J. Hureau, «Experimental study of wind-turbine airfoil aerodynamics in high turbulence, » Journal of Wind Engineering and Industrial Aerodynamics, vol. 90, nº 6, pp. 689-707, 2002. https://doi.org/10.1016/S0167-6105(02)00162-9. [10]C. Sicot, P. Devinant, S. Loyer and J. Hureau, «Rotational and turbulence effects on a wind turbine blade. Investigation of the stall mechanisms,» Journal ofwind engineering and industrial aerodynamics, vol. 96, nº 8-9, pp. 1320-1331, 2008. https://doi.org/10.1016/j.jweia.2008.01.013. [11]C. R. Chu and P. H. Chiang, «Turbulence effects on the wake flow and power production of a horizontal-axis wind turbine,» Journal of Wind Engineering and Industrial Aerodynamics, vol. 124, pp. 82-89, 2014. https://doi.org/10.1016/j.jweia.2013.11.001. [12]Y. Kamada, T. Maeda, J. Murata and Y. Nishida, «Visualization of the flow field and aerodynamic force on a Horizontal Axis Wind Turbine in turbulent inflows,» Energy, vol. 111, pp. 57-67, 2016. https://doi.org/10.1016/j.energy.2016.05.098. [13]Q. A. Li, J. Murata, M. Endo, T. Maeda and Y. Kamada, «Experimental and numerical investigation of the effect of turbulent inflow on a Horizontal Axis WindTurbine (Part I: Power performance),» Energy, vol.113, pp. 713-722, 2016. https://doi.org/10.1016/j.energy.2016.06.138. [14]S. W. Li, S. Wang, J. P. Wang and J. Mi, «Effect of turbulence intensity on airfoil flow: Numerical simulations and experimental measurements,» Applied Mathematics and Mechanics, vol. 32, nº 8, pp. 1029-1038, 2011. https://doi.org/10.1007/s10483-011-1478-8. [15]S. Wang, Y. Zhou, M. M. Alam and H. Yang, «Turbulent intensity and Reynolds number effects on an airfoil at low Reynolds numbers,» Physics of Fluids, vol. 26, nº11, p. 115107, 2014. https://doi.org/10.1063/1.4901969. [16]M. Lin and H. Sarlak, «A comparative study on the flow over an airfoil using transitional turbulence models, » AIP Conference Proceedings, vol. 1738, p.030050, 2016. https://doi.org/10.1063/1.4951806. [17]Langley Research Center, «Turbulence Modelling Resource,» NASA, [Online]. Available: https://turbmodels.larc.nasa.gov/langtrymenter_4eqn.html. [Last access: 08 03 2021].

Sign in / Sign up

Export Citation Format

Share Document