Effect of Wind Shear to Horizontal Axis Wind Turbine Aerodynamic

2014 ◽  
Vol 521 ◽  
pp. 99-103
Author(s):  
Ling Zhang ◽  
Hui Xia Sheng ◽  
Da Fei Guo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Shear ◽  
Numerical Study ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Power Calculation ◽  
Horizontal Axis Wind Turbine ◽  
Horizontal Axis Wind Turbines ◽  
And Performance

A three-dimensional unsteady numerical study of the streaming flow field of the1.2 MW horizontal axis wind turbines which operation in the 11.26 m/s under the uniform wind and the shear wind have been carried out in this paper. according to the simulation results to understand the effect of uniform flow and the dynamic wind shear flow to the output power of wind turbine and the aerodynamics. results showed that: Under the uniform wind,Wind turbine power calculation values are in good agreement with the design value ,Wind turbines under the influence of wind shear can lead to change in load and performance on the surface of the blade.

scholarly journals Study and Design of a Horizontal Axis Wind Turbine (0.5 kW) Using Software Solid Works

2021 ◽  
pp. 1-17
Author(s):  
Hagninou E. V. Donnou ◽  
Drissa Boro ◽  
Jean Noé Fabiyi ◽  
Marius Tovoeho ◽  
Aristide B. Akpo
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wedge Angle ◽  
Three Dimensional ◽  
Synchronous Generator ◽  
Horizontal Axis ◽  
Geometrical Shape ◽  
Horizontal Axis Wind Turbine ◽  
Horizontal Axis Wind Turbines ◽  
Lift And Drag

In the present work, the study and design of a horizontal axis wind turbine suitable for the Cotonou site were investigated on the coast of Benin. A statistical study using the Weibull distribution was carried out on the hourly wind data measured at 10 m from the ground by the Agency for Air Navigation Safety in Africa and Madagascar (ASECNA) over the period from January 1981 to December 2014. Then, the models, techniques, tools and approaches used to design horizontal axis wind turbines were presented and the wind turbine components characteristics were determined. The numerical design and assembly of these components were carried out using SolidWorks software. The results revealed that the designed wind turbine has a power of 571W. It is equipped with a permanent magnet synchronous generator and has three aluminum blades with NACA 4412 biconvex asymmetrical profile. The values obtained for the optimum coefficient of lift and drag are estimated at 1.196 and 0.0189 respectively. The blades are characterised by an attack optimum angle estimated at 6° and the wedge angle at 5°. Their length is 2.50 m and the maximum thickness is estimated at 0.032 m for a rope length of 0.27 m. The wind turbine efficiency is 44%. The computer program designed on SolidWorks gives three-dimensional views of the geometrical shape of the wind turbine components and their assembly has allowed to visualize the compact shape of the wind turbine after export via its graphical interface. The energy quantity that can be obtained from the wind turbine was estimated at 2712,718 kWh/year. This wind turbine design study is the first of its kind for the study area. In order to reduce the technological dependence and the import of wind energy systems, the results of this study could be used to produce lower cost wind energy available on our study site.

scholarly journals Comparison of horizontal axis wind turbine (HAWT) and vertical axis wind turbine (VAWT)

2018 ◽  
Vol 7 (4.13) ◽  
pp. 74 ◽  
Author(s):  
Muhd Khudri Johari ◽  
Muhammad Azim A Jalil ◽  
Mohammad Faizal Mohd Shariff
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Green Technology ◽  
Horizontal Axis ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Current Output ◽  
Voltage Output ◽  
And Performance

As the demand for green technology is rising rapidly worldwide, it is important that Malaysian researchers take advantage of Malaysia’s windy climates and areas to initiate more power generation projects using wind. The main objectives of this study are to build a functional wind turbine and to compare the performance of two types of design for wind turbine under different speeds and behaviours of the wind. A three-blade horizontal axis wind turbine (HAWT) and a Darrieus-type vertical axis wind turbine (VAWT) have been designed with CATIA software and constructed using a 3D-printing method. Both wind turbines have undergone series of tests before the voltage and current output from the wind turbines are collected. The result of the test is used to compare the performance of both wind turbines that will imply which design has the best efficiency and performance for Malaysia’s tropical climate. While HAWT can generate higher voltage (up to 8.99 V at one point), it decreases back to 0 V when the wind angle changes. VAWT, however, can generate lower voltage (1.4 V) but changes in the wind angle does not affect its voltage output at all. The analysis has proven that VAWT is significantly more efficient to be built and utilized for Malaysia’s tropical and windy climates. This is also an initiative project to gauge the possibility of building wind turbines, which could be built on the extensive and windy areas surrounding Malaysian airports.  

Analysis on Aerodynamic Performance of Horizontal Axis Wind Turbine Based on Nonlinear Wake Model

2013 ◽  
Vol 448-453 ◽  
pp. 1716-1720
Author(s):  
Rui Yang ◽  
Jiu Xin Wang ◽  
Sheng Long Zhang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Optimization Design ◽  
Aerodynamic Performance ◽  
Horizontal Axis ◽  
Wake Vortex ◽  
Horizontal Axis Wind Turbine ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model ◽  
Induced Velocity

A computational method based on nonlinear wake model was established for horizontal axis wind turbines aerodynamic performance prediction. This method makes use of finite difference method to solve the integral differential equation of the model, the induced velocity of wake vortex can be calculated from equations and compared with the induced velocity of wake vortex in linear model. The comparison between the calculated results of wind turbine under axis flow condition, including tip vortex geometry and aerodynamic performance, and available experimental data shows that this method is suitable for wind turbine aerodynamic performance analysis. Finally, a series of numerical calculations were made to investigate the change of wake geometry and aerodynamic performance of the wind turbine when yawing and pitch angle increasing, which provide foundations for aerodynamic optimization design of horizontal axis wind turbines.

scholarly journals Observation of the Starting and Low Speed Behavior of Small Horizontal Axis Wind Turbine

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Sikandar Khan ◽  
Kamran Shah ◽  
Izhar-Ul-Haq ◽  
Hamid Khan ◽  
Sajid Ali ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Starting Time ◽  
Speed Range ◽  
Horizontal Axis Wind Turbines ◽  
Starting Torque ◽  
High Angles Of Attack

This paper describes the starting behavior of small horizontal axis wind turbines at high angles of attack and low Reynolds number. The unfavorable relative wind direction during the starting time leads to low starting torque and more idling time. Wind turbine models of sizes less than 5 meters were simulated at wind speed range of 2 m/s to 5 m/s. Wind turbines were modeled in Pro/E and based on the optimized designs given by MATLAB codes. Wind turbine models were simulated in ADAMS for improving the starting behavior. The models with high starting torques and less idling times were selected. The starting behavior was successfully improved and the optimized wind turbine models were able to produce more starting torque even at wind speeds less than 5 m/s.

scholarly journals Establishing a robust testing approach for displacement measurement on a rotating horizontal-axis wind turbine

2018 ◽  
Vol 3 (1) ◽  
pp. 301-311
Author(s):  
Nadia Najafi ◽  
Allan Vesth
Keyword(s):  
Wind Turbine ◽  
Camera Calibration ◽  
Wind Turbines ◽  
Calibration Method ◽  
Horizontal Axis ◽  
Tracking Algorithm ◽  
Displacement Measurement ◽  
Horizontal Axis Wind Turbine ◽  
Damage And Failure ◽  
Horizontal Axis Wind Turbines

Abstract. Health monitoring by conventional sensors like accelerometers or strain gauges becomes challenging for large rotating structures due to the issues with feasibility, sensing and data transmission. In addition, acceleration measurements have low capability of presenting very small frequencies, which happen very often for large structures (for instance, frequencies between 0.2 and 0.5 Hz in horizontal-axis wind turbines). By contrast, displacement measurement using stereo vision is rapid, non-contacting and distributed over the structure. The sensors are cheaper and more easily applied to many places on the object to be measured. Horizontal-axis wind turbines are one of the most important large rotating structures and need to be measured and monitored in time to prevent damage and failure, and the blade tip position is one of the key parameters to measure in order to prevent the blade hitting the turbine tower. This paper presents a clearly described and easily applicable procedure for measuring the displacement on the components of a rotating horizontal-axis wind turbine with stereophotogrammetry. Paper markers have been applied on the rotor and tower of a scaled-down horizontal-axis wind turbine model in the workshop and the displacement measurement method has been demonstrated by measuring displacement during operation. The method is mainly developed in two parts: (1) camera calibration and (2) tracking algorithm. We introduce an efficient camera calibration method for measurement in large fields of view, which has always been a challenge. This method is easy and practical and offers better accuracy compared with 2-D traditional camera calibration. The tracking algorithm also works successfully and is able to track the points during rotation within the measurement time. Finally, the accuracy analysis has been conducted and has shown better accuracy of the new calibration method compared with 2-D traditional camera calibration.

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

2021 ◽  
Author(s):  
Poornima Menon ◽  
Srinivas G
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Performance Enhancement ◽  
Horizontal Axis ◽  
Horizontal Wind ◽  
Horizontal Axis Wind Turbine ◽  
Ansys Fluent ◽  
Horizontal Axis Wind Turbines ◽  
Design Requirements ◽  
Nrel Phase Vi

Abstract Wind turbines are one of the most prominent and popular sources of renewable energy, of which, horizontal axis wind turbines (HAWT) are the majorly chosen design for wind machines. These turbines rotate about the horizontal axis which is parallel to the ground. They comprise of aerodynamic blades (generated from the desired airfoil), that may be twisted or tapered as per the design requirements. The blades are attached to a rotor which is located either upwind or downwind. To help wind the orientation of the turbines, the upwind rotors have a tail vane, while the downwind rotors are coned which in turn help them to self-orient. One of the major reasons for the popularity of the horizontal wind turbine, is its ability to generate a larger amount of electricity for a given amount of wind. Due to its popularity, the enhancement in the design of HAWTs, is a major focus area for research. In the present study, a scaled-down CFD model of the NREL Phase VI was validated against the numerical and experimental data. The model used had a dual blade rotor and applied the S809 airfoil. The simulations were carried out using a rotating mesh in ANSYS Fluent. Validation was carried out for 3 velocities — 7m/s, 10m/s and 20m/s. Once validation was carried out, turbine was modified with the addition of vortex generators, in the form of cylindrical protrusions that reduce flow separation.

Robust Design of Horizontal Axis Wind Turbines Using Taguchi Method

2015 ◽  
Author(s):  
Singiresu S. Rao
Keyword(s):  
Taguchi Method ◽  
Wind Turbine ◽  
Robust Design ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Parameter Design ◽  
Energy Output ◽  
Horizontal Axis Wind Turbine ◽  
Momentum Theory ◽  
Horizontal Axis Wind Turbines

The robust design of horizontal axis wind turbines, including both parameter and tolerance designs, is presented. A simple way of designing robust horizontal axis wind turbine systems under realistic conditions is outlined with multiple design variables, multiple objectives, and multiple constraints simultaneously by using the traditional Taguchi method and its extensions. The performance of the turbine is predicted using the axial momentum theory and the blade element momentum theory. In the parameter design stage, the energy output of the turbine is maximized using the Taguchi method and an extended penalty-based Taguchi method is proposed to solve constrained parameter design problems. Using an appropriate set of tolerance settings of the parameters, the tolerance design problem is formulated so as to yield an economical design while ensuring a minimal variability in the performance of the wind turbine. The present work provides a simple and economical approach for the robust optimal design of horizontal axis wind turbines.

scholarly journals New System for the Acceleration of the Airflow in Wind Turbines

2019 ◽  
Vol 12 (2) ◽  
pp. 158-167
Author(s):  
Alejandro Alonso-Estébanez ◽  
Pablo Pascual-Muñoz ◽  
Felipe P. Alvarez Rabanal ◽  
Daniel Castro-Fresno ◽  
Juan J. Del Coz Díaz
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine ◽  
The Earth ◽  
Air Stream ◽  
Free Air ◽  
Prevailing Wind Direction ◽  
Horizontal Axis Wind Turbines ◽  
Wind Resource

Background: This patent is based on the wind industry technology called Diffuser Augmented Wind Turbines (DAWTs). This technology consists of a horizontal axis wind turbine, which is housed inside a duct with diverging section in the direction of the free air stream. In this paper, a review of preceding patents related to this technology is carried out. Objective: This paper presents an innovative patent to improve the performance of horizontal axis wind turbines. In particular, this system is aimed at improving the performance of those turbines that otherwise might not be installed due to the low wind resource existing at certain locations. Methods: The most innovative elements of this patent are: (1) the semi-spherical grooves, which are mechanized on the surface of the two diffusers in order to guarantee a more energetic boundary layer; (2) the coaxial diffuser, which is located downwind following the first diffuser in order to increase the suction effect on the air mass close to the inlet; (3) the coaxial rings located around the first diffuser outlet, which are used to deflect the external airflow toward the turbine wake; and (4), the selforientating system to orientate the system by the prevailing wind direction. Results: An application of the patent for increasing the power generated by a horizontal axis wind turbine with three blades is presented. The patent is designed and its performance is evaluated by using a Computational Fluid Dynamics code. The numerical results show that this system rises the airflow going through the rotor of the turbine. Conclusion: The patented device is an original contribution aimed at enabling a more profitable installation of wind turbines in places where the wind resource is insufficient because of the wind shear caused both by the proximity of the earth and the obstacles on the earth surface.

Sign in / Sign up

Export Citation Format

Share Document