Design and Behavior of RPC Slab Track

2014 ◽  
Vol 587-589 ◽  
pp. 1100-1105
Author(s):  
Jian Yang ◽  
Jin Sheng Wang ◽  
Xin Peng
Keyword(s):  
Material Properties ◽  
High Speed ◽  
Optimization Design ◽  
Reactive Powder Concrete ◽  
High Speed Railway ◽  
Slab Track ◽  
Existing Problems ◽  
Ballastless Track ◽  
Reactive Powder ◽  
And Behavior

Reactive Powder Concrete is proposed to be used in the ballastless track for its excellent material properties due to existing problems of high speed railway ballastless track. Three different unit types of RPC frame slab track were proposed through optimization design and the mechanical behavior of these frame slab track was analyzed. The results show that the RPC slab track meet the requirements of bearing capacity, the suggested type of RPC slab track is a frame slab with increased thickness because of its higher techno-economic advantages.

scholarly journals Mechanical Performance of a Ballastless Track System for the Railway Bridges of High-Speed Lines: Experimental and Numerical Study under Thermal Loading

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2876
Author(s):  
Yingying Zhang ◽  
Lingyu Zhou ◽  
Akim D. Mahunon ◽  
Guangchao Zhang ◽  
Xiusheng Peng ◽  
...  
Keyword(s):  
High Speed ◽  
Thermal Loading ◽  
Mechanical Performance ◽  
Track Structure ◽  
Box Girder ◽  
High Speed Railway ◽  
Ballastless Track ◽  
Track System ◽  
Girder Bridge ◽  
Track Slab

The mechanical performance of China Railway Track System type II (CRTS II) ballastless track suitable for High-Speed Railway (HSR) bridges is investigated in this project by testing a one-quarter-scaled three-span specimen under thermal loading. Stress analysis was performed both experimentally and numerically, via finite-element modeling in the latter case. The results showed that strains in the track slab, in the cement-emulsified asphalt (CA) mortar and in the track bed, increased nonlinearly with the temperature increase. In the longitudinal direction, the zero-displacement section between the track slab and the track bed was close to the 1/8L section of the beam, while the zero-displacement section between the track slab and the box girder bridge was close to the 3/8L section. The maximum values of the relative vertical displacement between the track bed and the bridge structure occurred in the section at three-quarters of the span. Numerical analysis showed that the lower the temperature, the larger the tensile stresses occurring in the different layers of the track structure, whereas the higher the temperature, the higher the relative displacement between the track system and the box girder bridge. Consequently, quantifying the stresses in the various components of the track structure resulting from sudden temperature drops and evaluating the relative displacements between the rails and the track bed resulting from high-temperature are helpful in the design of ballastless track structures for high-speed railway lines.

The Calculation of the Supporting Stress of Track Plate in Ballastless High-Speed Rail Structure

2011 ◽  
Vol 97-98 ◽  
pp. 3-9
Author(s):  
Yang Wang ◽  
Quan Mei Gong ◽  
Mei Fang Li
Keyword(s):  
Stress Distribution ◽  
High Speed ◽  
Design Theory ◽  
Moving Load ◽  
Structure Design ◽  
Track Structure ◽  
Beam Model ◽  
High Speed Rail ◽  
Slab Track ◽  
Ballastless Track

The slab track is a new sort of track structure, which has been widely used in high-speed rail and special line for passenger. However, the ballastless track structure design theory is still not perfect and can not meet the requirements of current high-speed rail and passenger line ballastless track. In this paper, composite beam method is used to calculate the deflection of the track plate and in this way the vertical supporting stress distribution of the track plate can be gotten which set a basis for the follow-up study of the dynamic stress distribution in the subgrade. Slab track plate’s bearing stress under moving load is analyzed through Matlab program. By calculation and analysis, it is found that the deflection of track plate and the rail in the double-point-supported finite beam model refers to the rate of spring coefficient of the fastener and the mortar.The supporting stress of the rail plate is inversely proportional to the supporting stress of the rail. The two boundary conditions of that model ,namely, setting the end of the model in the seams of the track plate or not , have little effect on the results. We can use the supporting stress of the track plates on state 1to get the distribution of the supporting stress in the track plate when bogies pass. Also, when the dynamic load magnification factor is 1.2, the track plate supporting stress of CRST I & CRST II-plate non-ballasted structure is around 40kPa.

Sign in / Sign up

Export Citation Format

Share Document