Analysis of Surge Shaft Excavation Process Based on 3-Dimensional Finite Difference Method

2014 ◽  
Vol 620 ◽  
pp. 69-74
Author(s):  
Zhen Zhong Shen ◽  
Ning Wang ◽  
Nan Yao ◽  
Chao Xin Shao

As an important part of the structure of hydroelectric power station, surge shaft is embedded in the rock mass, whose body size and loading conditions are typically complex. Thus, it is necessary to evaluate safety of the design scheme in order to ensure construction safety. With upper background, three dimensional finite difference model of the surge shaft and surrounding rock of a hydroelectric project in Zambia were established based on three dimensional nonlinear finite difference analysis method. Calculation of the surge shaft stepped excavation with supporting at all levels of the construction process was done. The deformation and stress state of the surrounding rock of surge shaft and its variation law in excavation process was analyzed. Furthermore, the stability of surrounding rocks and rationality of the designed support measures were evaluated.

2019 ◽  
Vol 9 (13) ◽  
pp. 2588 ◽  
Author(s):  
Jing Wang ◽  
Liping Li ◽  
Shaoshuai Shi ◽  
Shangqu Sun ◽  
Xingzhi Ba ◽  
...  

A large number of subway projects need to cross all kinds of disaster sources during the construction process. When a disaster source is unknown and uncertain, it is difficult for tunnel stability analysis to conform to the actual situation, which is likely to cause serious geological disasters. Firstly, the accurate location of the source of the disaster is realized via the geophysical method, and the orientation of the target is determined. Secondly, real imaging of the geological disaster source is realized using fine three-dimensional scanning equipment. Finally, the coupling law of the seepage field, displacement field, and stress field of the tunnel surrounding rock are analyzed. The stability of the tunnel is analyzed, and the reasonable karst treatment method is put forward.


2019 ◽  
Vol 131 ◽  
pp. 01027
Author(s):  
Li Yongbing ◽  
Binglei Li ◽  
Guanyu Hua ◽  
Xinran Jia ◽  
Yanqiao Chen ◽  
...  

Based on the Mohr-Coulomb elastic-plastic model and the practical engineering background of Mopanshan tunnel, this paper applies the finite-difference software FLAC3D to simulate and analyse the whole process of loess tunnel construction. Then, it analyses the stability of the surrounding rock and sup-port structure after partial excavation of the loess tunnel under the shallow burying and unsymmetrical load-ing condition. The study showed that in the absence of support, the shear failure occurred to the top/upper pilot tunnel of the tunnel face, the failure zone under tensile stress happened to the shallow soil of the earth surface, and the soil of tunnel face appeared to be damaged. Finally, according to the analysis results, a rea-sonable construction method suitable for the shallow and bias loess tunnel is determined.


2014 ◽  
Vol 638-640 ◽  
pp. 798-803
Author(s):  
Yong Tao Zhang

As the excavation of tunnels, there are new channels of the groundwater drainage. The original supply of the circulatory system has been destroyed. The effects of groundwater to rock mass of surrounding rock are aggravated. In this paper, combined with a new highway tunnel project, the model is built according to the design parameters and the site engineering geological conditions of the tunnel. The fluid-structure interaction module of the finite difference software FLAC3D is used for the research on tunnel excavation. The distribution of seepage field, the stability of surrounding rock and rock deformation under saturated conditions during the tunnel excavation have been analyzed. The simulation results have certain guiding meaning on fracture development, the stability design of tunnels in water-rich stratum and the design and construction of anti-drainage.


2004 ◽  
Vol 261-263 ◽  
pp. 57-62 ◽  
Author(s):  
Shui Cheng Yang ◽  
Li Song ◽  
Hong Jian Liao

The authors present a procedure for the analysis of the stability and propagation of cracks in arch dams based on linear elastic fracture mechanics. A finite element method was used to calculate the stress intensity factors(KⅠ, KⅡ and KⅢ) of crack in the concrete arch dam, and fracture analysis for arch dams was carried out, which based on the criterion of three-dimensional mixed mode fracture of concrete from the experiment. The analysis method can be applied to evaluate the safety of the arch dam and improve the design for arch dam.


2021 ◽  
Vol 16 (2) ◽  
pp. 203-217
Author(s):  
Nawel Bousbia

Abstract The excavation process of tunnels induces stresses and deformation in the surrounding soil. The method of excavation is one of the major problems related to the safety of the operators and the ground stability during the construction of underground works. So, it is necessary to choose an ideal method to minimize the displacements and stresses induced by tunneling. The main aim of this study is to simulate numerically the effect of different processes of tunneling on ground displacements, the settlements at surface soil and the internal efforts induced in the lining tunnel; in order to select the best process of excavation, which gives us a less effects on displacements generated by tunneling, thus, ensuring the stability and the solidity of the underground constructions. In addition, this study allows us to control and to predict the diverse movements generated by tunneling (displacements, settlements, efforts internes) exclusively for the shallow tunnel nearby to the underground constructions in the urban site. This modeling will be done by employing five different processes for tunnel excavation using the NATM (New Austrian Tunneling Method) method. The first process, the modeling of the excavation tunnel, is done almost in the same way as in reality; the partial face excavation, with seven slices, made by the excavation. The second process, by partial face excavation, is divided into eleven slices, next, we used the partial face excavation by nine slices, and then in thirteen slices. Finally, the dig is made by full-face excavation. The paper contributes to the prediction of the response of the soil environment to tunnel excavation using the NATM method and to minimize the diverse movements generated by tunneling. The appropriately chosen methodology confirms that displacements and subsidence are strongly influenced by the tunneling method. The three-dimensional Finite Elements Method using Plaxis3D program has been applied in the numerical simulation. The study resulted in the recommendation of a process that minimizes the effect of excavation on subsidence and ground displacement for a particular Setiha tunnel.


2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Shijie Chen ◽  
Ming Xiao ◽  
Juntao Chen

A numerical analysis method for block failure is proposed that is based on continuum mechanics. First, a mesh model that includes marked blocks was established based on the grid-based block identification method. Then, expressions of the contact force under various contact states were derived based on the explicit contact force algorithm, and a contact simulation method between blocks and the surrounding rock was proposed. The safety factors of the blocks were calculated based on the strength reduction method. This numerical analysis method can simulate both the continuous deformation of the surrounding rock and the discontinuous failure processes of the blocks. A simple example of a sliding block was used to evaluate the accuracy and rationality of the numerical method. Finally, combined with a deep underground excavation project under complex geological conditions, the stability of the blocks and rock were analyzed. The results indicate that the key blocks are damaged after excavation, the potentially dangerous blocks loosen and undergo large deformations, and the cracks between the blocks and the rock gradually increase as the excavation proceeds. The safety factors of the blocks change during the excavation. The numerical results demonstrate the influence of the surrounding rock on the failure process and on the stability of the blocks, and an effective analysis method is provided for the stability analysis of blocks under complex geological conditions.


2011 ◽  
Vol 219-220 ◽  
pp. 279-283
Author(s):  
Yong Xia Tao ◽  
Jian Ling Tan

Highly skilled capacity is the aim of vocational training about the course of hydropower building construction. Modern teaching methods have some prosperity, such as immediacy, interaction, imagination and so on .These modern means break the bottleneck of traditional teaching methods. With the help of three-dimensional model and flash animation, which do help students make a good understanding of the course and master the skills.


Sign in / Sign up

Export Citation Format

Share Document