Research on Management System of University Multimedia Teaching Equipment Based on the Internet of Things Technology

2014 ◽  
Vol 687-691 ◽  
pp. 2494-2496
Author(s):  
Kai Liu ◽  
Lu Lv
Keyword(s):  
Internet Of Things ◽  
Communication Technology ◽  
Radio Frequency Identification ◽  
Multimedia Technology ◽  
Equipment Management ◽  
Existing Problems ◽  
Multimedia Teaching ◽  
Frequency Identification ◽  
Internet Of Things Technology ◽  
The Internet Of Things

with the development of computer technology, network communication technology and multimedia technology, multimedia teaching has being widely used, especially in colleges and universities.This paper emphatically presented the application situation of radio frequency identification technology (RFID) and wireless sensor network technology (WSN) in internet of things technology in the existing problems of multimedia teaching equipment management, and explored its application effect.

scholarly journals Research on Indoor Positioning Algorithm of Single Reader Based on Gated Recurrent Unit

2021 ◽  
pp. 1-10
Author(s):  
Jintao Tang ◽  
Lvqing Yang ◽  
Jiangsheng Zhao ◽  
Yishu Qiu ◽  
Yihui Deng
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Indoor Positioning ◽  
The Internet ◽  
Positioning Accuracy ◽  
Frequency Identification ◽  
The Cost ◽  
Positioning Algorithm ◽  
Gated Recurrent Unit ◽  
The Internet Of Things

With the development of the Internet of Things and Radio Frequency Identification (RFID), indoor positioning technology as an important part of positioning technology, has been attracting much attention in recent years. In order to solve the problems of low precision, high cost and signal collision between readers, a new indoor positioning algorithm based on a single RFID reader combined with a Double-order Gated Recurrent Unit (GRU) are proposed in this paper. Firstly, the reader is moved along the specified direction to collect the sequential tag data. Then, the tag’s coordinate is taken as the target value to train models and compare them with existing algorithms. Finally, the best Gated Recurrent Unit positioning model is used to estimate the position of the tags. Experiment results show that the proposed algorithm can effectively improve positioning accuracy, reduce the number of readers, cut down the cost and eliminate the collisions of reader signals.

scholarly journals Privacy by design : principles as a foundation to a more secure Internet of Things

2021 ◽  
Author(s):  
Mohamad Oubai Al-Rejleh
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Personal Data ◽  
The Internet ◽  
Quantified Self ◽  
Everyday Objects ◽  
Late 21St Century ◽  
Frequency Identification ◽  
Internet Networks ◽  
The Internet Of Things

The Internet of Things (IoT) is a revolutionary concept that emerged in the late 21st century, whereby everyday objects such as household items, cars, and wearables, equipped with sensors and (Radio Frequency Identification) RFID chips, can communicate with the internet and to their physical surroundings. These chips allow the connected items to share information, and allow the user to collect information about his/her “quantified self”, measuring personal data such as habits of usage, lifestyle, and location through internet networks. IoT enabled devices are designed to collect, store, share, and analyze of highly personal data ubiquitously and in real time. However, with this new affordance of connectivity, comes a potential loss of privacy for users, as ever increasing sets of personal data are collected and tracked. As such, there is a pressing need for privacy considerations to be embedded within the early stages of design of connected devices and networks.

Research on Internet of Vehicles and its Application in Intelligent Transportation

2013 ◽  
Vol 321-324 ◽  
pp. 2818-2821 ◽  
Author(s):  
Jian Ming Huang
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Traffic Congestion ◽  
Intelligent Transportation ◽  
Traffic Information ◽  
Sensor Technology ◽  
Transportation Industry ◽  
Internet Of Vehicles ◽  
Frequency Identification ◽  
Internet Of Things Technology

At present, the transportation industry brings energy consumption, pollution and traffic congestion is becoming more and more serious, which has greatly restricted the economic and social development. This paper elaborates the concepts of Internet of things, intelligent transportation, and Internet of vehicles; Internet of vehicles based on Internet of Things technology is considered as an effective method to solve road congestion. The key technologies of the Internet of vehicles include traffic information perception technology, network communication technology, and cloud computing technologies etc. among them, radio frequency identification technology, sensor technology, floating car data technology, and GPS positioning technology are the focus. Application of Internet of vehicles is discussed, and its future development is prospected.

Design and Development of an Internet of Things (IoT)-Based Anti-Theft System in Museum Cultural Relics Using RFID

2022 ◽  
pp. 168-180
Author(s):  
Sasikumar Gurumoorthy ◽  
L. Venkateswara Reddy ◽  
Sudhakaran Periakaruppan
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Security Measures ◽  
Photographic Camera ◽  
The World ◽  
Unique Identity ◽  
Frequency Identification ◽  
Hardware Component ◽  
The Internet Of Things

Art colonnades and museums all over the world are the first option for individuals to visit for the enhancement of the cultural life of people. To ensure their safety, museums have established numerous cultural security measures. Traditional strategies do not obstruct their pace entirely. They only use a computer in the museum to check individuals at the entrance and exit. Therefore, the authors proposed a gallery anti-stealing device created on the internet-of-things (IoT) technology that ensures security through passive readers/writers of RFID. Radio frequency identification (RFID) remains a system that practices isolated data storing and recovery and offers object tracking with a unique identity code. The system then sends sound and light warning information, while the photographic camera structure is triggered to capture a picture at the same time. The recognition of the accuracy in the hardware component of the device can be additionally enhanced by the use of this technology to increase the safety of museum equipment.

Exploring Secure Computing for the Internet of Things, Internet of Everything, Web of Things, and Hyperconnectivity

2017 ◽  
pp. 1-12 ◽  
Author(s):  
Maurice Dawson
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Web Of Things ◽  
Internet Of Everything ◽  
Secure Computing ◽  
The Everyday ◽  
Frequency Identification ◽  
Technological Platforms ◽  
The Internet Of Things

Secure computing is essential as environments continue to become intertwined and hyperconnected. As the Internet of Things (IoT), Web of Things (WoT), and the Internet of Everything (IoE) dominate the landscape of technological platforms, protection these complicated networks is important. The everyday person who wishes to have more devices that allow the ability to be connected needs to be aware of what threats they could be potentially exposing themselves to. Additionally, for the unknowing consumer of everyday products needs to be aware of what it means to have sensors, Radio Frequency IDentification (RFID), Bluetooth, and WiFi enabled products. This submission explores how Availability, Integrity, and Confidentiality (AIC) can be applied to IoT, WoT, and IoE with consideration for the application of these architectures in the defense sector.

scholarly journals Augmented RFID Technologies for the Internet of Things and Beyond

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 987
Author(s):  
Luciano Tarricone ◽  
Jasmin Grosinger
Keyword(s):  
Internet Of Things ◽  
Complex Systems ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Cost Reduction ◽  
The Internet ◽  
Special Issue ◽  
Enabling Technologies ◽  
Frequency Identification ◽  
The Internet Of Things

Radio frequency identification (RFID) is one of the crucial enabling technologies for the Internet of Things (IoT). This is leading to a continuous augmentation of RFID technologies, in terms of sensing capabilities, energetic autonomy, usability, and cost affordability, and this special issue proposes an overview on such a challenging scenario. The proposed results, in terms of cost reduction, miniaturization, and compatibility with complex systems and technologies, as well as the identification of the relevant criticalities, also pave the way to future steps being taken that go beyond the current IoT.

Nanosilver Conductive Ink Inkjet Printing RFID Tag Antenna

2013 ◽  
Vol 469 ◽  
pp. 322-325 ◽  
Author(s):  
Zhi Qiang Gao ◽  
Xiu Ping Zhao
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Chemical Reduction ◽  
Production Method ◽  
Data Encryption ◽  
Reduction Reaction ◽  
The Internet ◽  
Protective Agent ◽  
Internet Of Things Technology ◽  
The Internet Of Things

The Internet of Things technology used in agricultural products, such as food safety traceability management is taking the technological advantages of the Internet of Things RFID (Radio Frequency IDentification) is non-contact automatic fast read and write data encryption, in order to achieve a unified management and efficient flow of work in coordination.This thesis reports a production method of conductive nanosilver jet ink. The ink can be used to directly print RFID antenna coil. In the method using silver nitrate as silver source, hydrazine hydrate as a reducing agent, polyvinyl pyrrolidone as a protective agent. Obtain the dispersion of silver nanoparticles through chemical reduction reaction. The dispersion was purified and used inkjet printer into a graphic on glossy photo paper, after 180 °C sintered for 15 minutes with good conductivity, RFID antennas to meet requirements.

Researches and Designs of Middleware Data Acquisition Function of Internet of Things

2012 ◽  
Vol 263-266 ◽  
pp. 2834-2837
Author(s):  
Lei Sang ◽  
Duo Long
Keyword(s):  
Internet Of Things ◽  
Data Acquisition ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Middleware Technology ◽  
Frequency Identification ◽  
Key Issues ◽  
Electronic Tag ◽  
Research And Design ◽  
The Internet Of Things

The Internet of things covers many aspects such as the electronic tag reader research, the Internet of things software research and the e-commerce research, etc. The SAVANT middleware is one of the key issues of the study. Based on electronic product code, radio frequency identification technology and system description middleware technology, this paper focuses on research and design of the Internet of things middleware system to solve the problem of data acquisition.

RFID Tag Area Management Base on IOT

2013 ◽  
Vol 756-759 ◽  
pp. 4529-4532 ◽  
Author(s):  
Hao Zeng ◽  
Yan Hui Fu ◽  
Xu Chen
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Rfid Tag ◽  
Frequency Identification ◽  
The Right ◽  
The Internet Of Things ◽  
Area Management

Traditional Radio Frequency Identification (RFID) Tag Equipment has some problems like these: it is difficult to realize if the tag is kept out, destroyed, or taken away abnormally. It cant accurately judge where the area the tag had moved to is. Besides, it is difficult to distinguish the right of the tag in the Tag Management. To solve these issues, this paper serves with a method which is based on the Internet of Things (IOT). It mainly includes as the following: the tag is activated in the Controlled Area, the judgment of the tag access the Controlled Area, whether the tag exists in the Controlled Area or not. These methods can reform the problems that the Traditional RFID Tag Equipment has.

scholarly journals Efficient DFSA Algorithm in RFID Systems for the Internet of Things

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Hsing-Wen Wang
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Tag Identification ◽  
Business Applications ◽  
Rfid System ◽  
Wireless Telecommunication ◽  
Efficient Scheme ◽  
Frequency Identification ◽  
The Internet Of Things

Radio Frequency IDentification (RFID) used in business applications and international business management fields can create and sustain the competitive advantage, which is also one of the wireless telecommunication techniques for recognizing objects to realize Internet of Things (IoT) technologies. In construction of IoT network, the RFID technologies play the role of the front-end data collection via tag identification, as the basis of IoT. Hence, the adoption of RFID technologies is spurring innovation and the development of the IoT. However, in RFID system, one of the most important challenges is the collision resolution between the tags when these tags transmit their data to the reader simultaneously. Hence, in this paper I develop an efficient scheme to estimate the number of unidentified tags for Dynamic Framed Slotted Aloha (DFSA) based RFID system, with the view of increasing system performance. In addition to theoretical analysis, simulations are conducted to evaluate the performance of proposed scheme. The simulation results reveal the proposed scheme works very well in providing a substantial performance improvement in RFID system. The proposed algorithm promotes business effectiveness and efficiency while applying the RFID technologies to IoT.

Sign in / Sign up

Export Citation Format

Share Document