The Comprehensive Comparison of the Selected Cutting Materials with Standard ISO 3685 in Machining Process of Steel C60
The main part of Standard ISO 3685 is T-vc dependence for various cutting materials. The Standard ISO 3685 contains main properties and characteristics for three most important cutting materials those are used in engineering practice. These cutting materials are used for cutting tools made of high speed steel, cutting ceramic and sintered carbide. Some types of cutting materials are defined by means of descriptions in standards ISO, some types by means of catalogues from the manufacturer. There are a lot of types of cutting materials they have not been defined theirs properties exactly yet and theirs properties have to be defined on experiments. There is a presumption that descriptions in standards ISO are not correct and these standards have to be examined and verified, because that this fact have to be confirmed or disproved. Accuracy and completeness technical standards ISO are very important part quality of manufacturing. Article describes process how to define T-vc dependence for cutting tools made of high speed steel, cutting ceramic and sintered carbide, because were found deficiencies in valid standard ISO 3685.