Design and Implementation of a Remote Monitor System on Potted Flowers

2015 ◽  
Vol 738-739 ◽  
pp. 720-725
Author(s):  
Wan Li Zhang ◽  
Zhen Bo Guo ◽  
Qiang Zhou ◽  
Kai Xi Wang
Keyword(s):  
Wireless Communication ◽  
Low Cost ◽  
Control Module ◽  
Wireless Monitoring ◽  
Communication Module ◽  
Remote Monitor System ◽  
Measuring Module ◽  
Data Acquisition Module ◽  
And Control ◽  
Management Requirement

To meet the management requirement of potted flowers, a maneuverable and low-cost wireless monitoring system on the potted flower is designed in this paper. The system includes measuring module, data read and control module, remote wireless communication module and cloud storage module. The Arduino UNO platform is the core control module for this system, and the WiShield module is used as the wireless communication module. And, YL-69, GY-30 and SHT1x sensors constitute the data acquisition module. This system realized the acquisition of the air temperature and humidity, soil humidity and illumination, which were transmitted to the Yeelink platform to be saved or be used for online monitoring by the wireless communication module. This system is easy to be deployed, and has the features of low costs and good scalability.

Design of the Wireless Monitoring System Based on CC1100 in Greenhouse

2014 ◽  
Vol 945-949 ◽  
pp. 2709-2712
Author(s):  
Jie Bao ◽  
Hong Bin Chen ◽  
Ren Xia Ou ◽  
Jie Wu
Keyword(s):  
Carbon Dioxide ◽  
Control System ◽  
Wireless Communication ◽  
Light Intensity ◽  
Monitoring System ◽  
Small Volume ◽  
Low Cost ◽  
Carbon Dioxide Concentration ◽  
Wireless Monitoring ◽  
Communication Module

For real-time monitoring of the factors in the greenhouses such as temperature, humidity, carbon dioxide concentration, light intensity. Design for the greenhouse wireless monitoring system based on CC1100 chip. To realize data acquisition and transmission via the combination of the CC1100 wireless communication module and MCU control system. After testing the system has the characteristics of small volume, simple operation, low cost and strong practicability etc.

Design of Intelligent Acquisition Terminal for Communication Base Station Parameters

2014 ◽  
Vol 644-650 ◽  
pp. 4338-4341
Author(s):  
Xi Na Zhang ◽  
Zhi Zhong Zhang
Keyword(s):  
Wireless Communication ◽  
Data Acquisition ◽  
Software Design ◽  
Management System ◽  
Base Station ◽  
Design Solution ◽  
Intelligent Terminal ◽  
Core Module ◽  
Communication Module ◽  
Data Acquisition Module

The terminal uses data acquisition module to collect antenna parameters of the base station, data is processed by S3C2440 core module and transmitted to management system by wireless communication module. This introduces hardware and software design solution of the terminal. The intelligent terminal can measure coordinates, altitude, azimuth and tilt of base station.

DEVELOPMENT OF AN AUTOMATIC IDLING STOP AND GO CONTROL APPARATUS FOR AN EFI SCOOTER

2014 ◽  
Vol 23 (04) ◽  
pp. 1450044
Author(s):  
CHIH-HSIEN YU ◽  
HAO-YUAN TSENG
Keyword(s):  
Fuel Injection ◽  
Combustion Engine ◽  
Low Cost ◽  
Control Technique ◽  
Control Logic ◽  
Control Module ◽  
Security Issues ◽  
Stop And Go ◽  
And Control ◽  
Control Apparatus

In an attempt to reduce exhaust emissions from transportation vehicles, the Taiwanese government plans to enact the "no idling emission" policy regarding motorcycles/scooters. Automatic Idling Stop and Go (AISG) technology is a simple low cost method in which the internal combustion engine is automatically powered off when the scooter stops and restarted when the driver wishes. However, due to dissimilarities between scooters and automobiles in terms of driving behavior and powertrain configuration, the AISG topology and control strategy as used in automobiles cannot be applied to scooters directly. This paper investigated the feasibility of applying the AISG control technique to scooters to enhance the system's security and reliability and address public concerns about AISG by analyzing riding behavior and security issues. The goal of this study was to demonstrate an AISG device, which included the development of a miniaturized AISG control module and control logic algorithm considering operative convenience and safety. Finally the developed AISG control module was installed in a four-stroke, electronic-fuel-injection (EFI) scooter, enabling us to perform an actual on-road test to verify the feasibility and reliability of the AISG control technology.

Design of Gamma Energy Spectrometer Based on the Technology of LabVIEW and Bluetooth

2010 ◽  
Vol 113-116 ◽  
pp. 720-724
Author(s):  
Fang Yuan ◽  
Yue Zhong Li ◽  
Li Yi Xie
Keyword(s):  
Data Storage ◽  
Liquid Crystal Display ◽  
Low Cost ◽  
Acquisition System ◽  
Gamma Energy ◽  
Display Module ◽  
Communication Module ◽  
Energy Spectrometer ◽  
Analysis System ◽  
Data Acquisition Module

This paper introduced the design of gamma energy spectrometer by technology of LabVIEW and Bluetooth. The hardware of system included portable gamma energy spectrometer, Bluetooth module and PC. The software of system included the composed of acquisition system by the MCU and analysis system by PC.The design of acquisition system included the design of main program, liquid crystal display module, keyboard module, Bluetooth communication module and data acquisition module. The design of analysis system included the design of serial communication module, data storage module and data processing module. Practice shows that the energy spectrometer has a user-friendly, flexible, low cost, easy to expand and good performance.

Design of Smart Home Management System Based on GSM and Zigbee

2013 ◽  
Vol 842 ◽  
pp. 703-707 ◽  
Author(s):  
Jian Min Wang ◽  
Hai Bo Wei
Keyword(s):  
Wireless Communication ◽  
Mobile Phones ◽  
Management System ◽  
Short Distance ◽  
Smart Home ◽  
Control Network ◽  
Home Management ◽  
Communication Module ◽  
And Control

The design is mainly achieved the network that based on the new short-distance wireless instead of the traditional wired as a family of internal data and control network, and built smart home managementsystem based on embedded GSM technology . The design of smart home managementsystem consists of five parts: ARM controller platform, mobile phones, GSM wireless communication module, Zigbee Coordinator nodes, Zigbee Terminal nodes and sensor parts.

Adaptive Control Research and Design Based on STC Single-Chip Microcomputer

2012 ◽  
Vol 516-517 ◽  
pp. 1678-1682
Author(s):  
Qiang Xu ◽  
Qian Zhang ◽  
Kai Chun Ren ◽  
Xing Qi Zhang ◽  
Shi Gang Li
Keyword(s):  
Software Design ◽  
Lighting System ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Control Module ◽  
Control Research ◽  
Data Acquisition Module ◽  
And Control ◽  
Led Lights ◽  
Research And Design

This paper analyses the characteristics and the glowing use value of LED lights, using STC series microcontroller design a system of LED which can automatically adjust the light according to the environment changes. The control system consists by the data acquisition module and control module and circuit driver module. This paper gives the control circuit hardware and software design. This system has many advantages such as energy conservation and environmental protection and longevity when compared with the conventional lighting system.

Intelligent Safety Control System for Operation of Group Tower Cranes

2013 ◽  
Vol 330 ◽  
pp. 592-597
Author(s):  
Zhen Zhen Zhang ◽  
Hong Liu Xu ◽  
Xiao Guan ◽  
Bin Wang
Keyword(s):  
Control System ◽  
Wireless Communication ◽  
Real Time ◽  
Early Warning ◽  
Intelligent Design ◽  
Failure Diagnosis ◽  
Operational Parameters ◽  
Control Module ◽  
Safety Control ◽  
Data Acquisition Module

An intelligent safety control system for operation of group tower cranes was developed in the context of rising security problems during operation of group tower cranes. The anti-anti-collision principle includes self-anti-collision and multi-tower cranes anti-collision. The system consists of PLC module, Touch screen, signal receiving module, data acquisition module, control module and signal transmitting module. Several techniques such as digital coding, early warning, failure diagnosis, wireless communication, intelligent design and humanization design are applied in the system. Operational parameters of tower canes are detected in real time insure the safety for cross operation of several tower cranes.

System Design and Implementation of a Transient-Motion-Powered IoT Sensor Node

2020 ◽  
Author(s):  
Xin Li ◽  
Hong Tang ◽  
Junrui Liang
Keyword(s):  
Wireless Communication ◽  
Embedded System ◽  
Motion Detection ◽  
Sensor Node ◽  
Low Cost ◽  
Successful Implementation ◽  
Interface Circuit ◽  
Transient Motion ◽  
Communication Module ◽  
Self Powered

Abstract In this paper, we introduce ViPSN-E: a transient-motion-powered IoT sensor node. It carries out motion detection and wireless communication by making good use of the energy harvested from an instantaneous motion. In our design, a piezo-magneto-elastic structure, which is composed of a low-cost piezoelectric cantilever and a pair of magnets, is used to induce a plucking excitation and power generation under a transient and one-way movement. An energy management circuit, which is composed of a self-powered synchronized switch harvesting on inductor (SP-SSHI) interface circuit and a voltage regulator is utilized for efficient energy conversion. Through the sophisticated collaboration between mechatronic design and computer program, the motion information can also be identified and sent out by a wireless communication module. The cyber-electromechanical synergy among mechanical dynamics, power conditioning circuit, and the low-power embedded system is emphasized towards the successful implementation of such a motion-powered IoT device. The prototyped ViPSN-E has done a good job by making good use of the energy associated with each transient plucking motion. With only one plucking excitation, the system can realize motion detection and several rounds of wire-less transmission. The study on ViPSN-E provides valuable guidance towards the self-powered ubiquitous motion-sensing systems.

Design and Implementation of Electronic Bus Stop Boards System Based on Wireless Communication Module

2014 ◽  
Vol 651-653 ◽  
pp. 2441-2444
Author(s):  
Cai Rong Zhang ◽  
Guo Liang Liu ◽  
Bin Wei
Keyword(s):  
Wireless Communication ◽  
Short Range ◽  
High Reliability ◽  
Low Cost ◽  
Long Distance ◽  
Current Time ◽  
Bus Stop ◽  
Passenger Travel ◽  
Communication Module ◽  
Distance Communication

To the convenience of passenger travel, a kind of electronic bus stop boards system is discussed in this paper, which can be considered as intelligent equipment based on wireless communication technology. The combination between short-range wireless and long-distance communication module, together with the microcontroller composes the electronic bus stop boards system. The electronic bus stop boards system indicates the number of stations away from passengers’ station board on different nearest buses, current time and real-time humiture. The test results showed that the system could realize short-range and long-distance communication function and display the necessary information. With the advantages of high reliability and efficiency at low cost, the electronic bus stop boards system has more practical popularized value to replace traditional intelligent station boards with GPS and GPRS by cheap wireless communication module.

Sign in / Sign up

Export Citation Format

Share Document