Sunlight Greenhouse Temperature Prediction Model Based on Bayesian Regularization BP Neural Network

2015 ◽  
Vol 740 ◽  
pp. 871-874
Author(s):  
Hui Zhao ◽  
Li Rong Shi ◽  
Hong Jun Wang
Keyword(s):  
Neural Network ◽  
Network Structure ◽  
Bp Neural Network ◽  
Principal Component ◽  
Coupling Factor ◽  
Bayesian Regularization ◽  
The Neural Network ◽  
Neural Network Structure ◽  
Input Variables ◽  
Bp Neural Network Model

Directing against the problems of too large size of the neural network structure due to the existence of a complex relationship between the input coupling factor and too many input factors in establishing model for predicting temperature of sunlight greenhouse. This article chose the environmental factors that affect the sunlight greenhouse temperature as data sample. Through the principal component analysis of data samples, three main factors were extracted. These selected principal component values were taken as the input variables of BP neural network model. Use the Bayesian regularization algorithm to improve the BP neural network. The empirical results show that this method is utilized modify BP neural network, which can simplify network structure and smooth fitting curve, has good generalization capability.

scholarly journals Modeling Prediction and Research on Leaf Moisturizing Effect of Tobacco Redrying

2021 ◽  
Vol 2068 (1) ◽  
pp. 012050
Author(s):  
Keqiang Li ◽  
Ruidong Li ◽  
Wenyong Huang ◽  
Zehui Yang ◽  
Xiaobing Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Mean Square Error ◽  
Air Temperature ◽  
Network Structure ◽  
Bp Neural Network ◽  
Mean Square ◽  
Process Data ◽  
Hot Air ◽  
The Neural Network ◽  
Neural Network Structure

Abstract This paper studies the influence of the process parameter setting of the hot-air leaf moisturizer on the quality index of the exit leaf during the secondary leaf conditioning of threshing and redrying, and establishes the corresponding prediction model. According to the characteristics of the characteristic process data of the secondary moisturizing, the prediction models of BP neural network and cyclic neural network are established. Call the current popular neural network writing framework TensorFlow’s high-level API interface to build the neural network structure. Gradually optimize the activation function, optimizer, number of hidden layer neurons and other key parameters in the neural network structure to make the prediction results of the test set reach the best state. By inputting the parameters of the front steam nozzle pressure, the front-end water flow rate, the hot air temperature, the return air temperature, the temperature of the feed blade, and the water combination of the feed blade, two key tobacco leaf evaluation indicators are predicted for the outlet leaf moisture and temperature. Based on the mean square error, root mean square error, and average absolute error of the prediction results as quantitative indicators, the three indicators of BP neural network are 7.17, 2.68, 1.83, and the three indicators of cyclic neural network are 4.70, 2.16, 1.74. It is concluded that the cyclic neural network has the best prediction effect. It has certain reference value for the tobacco factory to adjust the process parameters of the secondary leaf conditioning according to different conditions.

scholarly journals Prediction Model of Iron Ore Pellet Ambient Strength and Sensitivity Analysis on the Influence Factors

Metals ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 593 ◽  
Author(s):  
Qiangjian Gao ◽  
Yingyi Zhang ◽  
Xin Jiang ◽  
Haiyan Zheng ◽  
Fengman Shen
Keyword(s):  
Neural Network ◽  
Sensitivity Analysis ◽  
Prediction Model ◽  
Bp Neural Network ◽  
Back Propagation ◽  
Influence Factors ◽  
Principal Component ◽  
Bp Network ◽  
Input Variables ◽  
Artificial Neural Network Ann

The Ambient Compressive Strength (CS) of pellets, influenced by several factors, is regarded as a criterion to assess pellets during metallurgical processes. A prediction model based on Artificial Neural Network (ANN) was proposed in order to provide a reliable and economic control strategy for CS in pellet production and to forecast and control pellet CS. The dimensionality of 19 influence factors of CS was considered and reduced by Principal Component Analysis (PCA). The PCA variables were then used as the input variables for the Back Propagation (BP) neural network, which was upgraded by Genetic Algorithm (GA), with CS as the output variable. After training and testing with production data, the PCA-GA-BP neural network was established. Additionally, the sensitivity analysis of input variables was calculated to obtain a detailed influence on pellet CS. It has been found that prediction accuracy of the PCA-GA-BP network mentioned here is 96.4%, indicating that the ANN network is effective to predict CS in the pelletizing process.

The selection of adaptive region of geomagnetic map based on PCA and GA-BP neural network

2020 ◽  
Author(s):  
Yang Chong ◽  
Dongqing Zhao ◽  
Guorui Xiao ◽  
Minzhi Xiang ◽  
Linyang Li ◽  
...  
Keyword(s):  
Neural Network ◽  
Bp Neural Network ◽  
Principal Component ◽  
Background Field ◽  
Characteristic Parameters ◽  
Positioning Accuracy ◽  
Matching Performance ◽  
Bp Neural Network Model ◽  
Selection Of

<p>The selection of adaptive region of geomagnetic map is an important factor that affects the positioning accuracy of geomagnetic navigation. An automatic recognition and classification method of adaptive region of geomagnetic background field based on Principal Component Analysis (PCA) and GA-BP neural network is proposed. Firstly, PCA is used to analyze the geomagnetic characteristic parameters, and the independent characteristic parameters containing principal components are selected. Then, the GA-BP neural network model is constructed, and the correspondence between the geomagnetic characteristic parameters and matching performance is established, so as to realize the recognition and classification of adaptive region. Finally, Simulation results show that the method is feasible and efficient, and the positioning accuracy of geomagnetic navigation is improved.</p>

scholarly journals CHOOSING A NEURAL NETWORK STRUCTURE FOR SIGNAL PROCESSING AS AN EXPERIMENT PLANNING

2021 ◽  
pp. 123-132
Author(s):  
Leonid A. Slavutskii ◽  
Elena V. Slavutskaya
Keyword(s):  
Neural Network ◽  
Signal Processing ◽  
Network Structure ◽  
Electric Power Industry ◽  
Planning Theory ◽  
Experiment Planning ◽  
Harmonic Amplitude ◽  
The Neural Network ◽  
Nonlinear Distortions ◽  
Neural Network Structure

The paper is devoted to the use of artificial neural networks for signal processing in electrical engineering and electric power industry. Direct propagation neural network (perceptron) is considered as an object in the theory of experiment planning. The variants of the neural network structure empirical choice, the quality criteria of its training and testing are analyzed. It is shown that the perceptron structure choice, the training sample, and the training algorithms require planning. Variables and parameters of neuro algorithm that can act as factors, state parameters, and disturbing influences in the framework of the experimental planning theory are discussed. The proposed approach is demonstrated by the example of neural network analysis of the industrial frequency signal of 50 Hz nonlinear distortions. The possibility of using an elementary perceptron with one hidden layer and a minimum number of neurons to correct the transformer saturation current is analyzed. The conditions under which the neuro algorithm allows one to restore the values of the main harmonic amplitude, frequency and phase with an error of no more than one percent are revealed. The signal processing in a «sliding window» with a duration of a fraction of the fundamental frequency period is proposed, and the neuro algorithm accuracy characteristics are estimated. The possibility to automate the neural network structure choosing for signal processing is discussed.

scholarly journals Residual Control Chart for Binary Response with Multicollinearity Covariates by Neural Network Model

Symmetry ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 381 ◽  
Author(s):  
Jong-Min Kim ◽  
Ning Wang ◽  
Yumin Liu ◽  
Kayoung Park
Keyword(s):  
Neural Network ◽  
Control Chart ◽  
Network Model ◽  
Neural Network Model ◽  
Multivariate Data ◽  
Principal Component ◽  
Binary Response ◽  
Link Functions ◽  
The Neural Network ◽  
Input Variables

Quality control studies have dealt with symmetrical data having the same shape with respect to left and right. In this research, we propose the residual (r) control chart for binary asymmetrical (non-symmetric) data with multicollinearity between input variables via combining principal component analysis (PCA), functional PCA (FPCA) and the generalized linear model with probit and logit link functions, and neural network regression model. The motivation in this research is that the proposed control chart method can deal with both high-dimensional correlated multivariate data and high frequency functional multivariate data by neural network model and FPCA. We show that the neural network r control chart is relatively efficient to monitor the simulated and real binary response data with the narrow length of control limits.

A Neural Network Structure Decomposition Based on Pruning and its Visualization Method

2013 ◽  
Vol 17 (3) ◽  
pp. 443-449
Author(s):  
Atsushi Shibata ◽  
◽  
Jiajun Lu ◽  
Fangyan Dong ◽  
Kaoru Hirota
Keyword(s):  
Neural Network ◽  
Transfer Learning ◽  
Network Structure ◽  
Robot Motion ◽  
Network Structures ◽  
Visualization Method ◽  
Pruning Method ◽  
The Neural Network ◽  
Structure Decomposition ◽  
Neural Network Structure

To decompose neural network structures for composite tasks, a pruning method and its visualization method are proposed. Visualization by placing the neurons on a 2D plane clarifies the structure related to each composited task. Experiments on a composite task using two tasks from a UCI dataset show that the neural network of the composite task contains more than 80% of neurons. The proposed methods target the transfer learning of robot motion, and results of an adaptation experiments are also referred.

Modelling of viscosity of fluorine-free mold fluxes using neural network

2019 ◽  
Vol 116 (2) ◽  
pp. 201
Author(s):  
Xiaoli Yuan ◽  
Lin Wang ◽  
Jianqiang Zhang ◽  
Oleg Ostrovski ◽  
Chen Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Network Model ◽  
Neural Network Model ◽  
Bp Neural Network ◽  
Back Propagation ◽  
Viscosity Data ◽  
The Neural Network ◽  
Mold Fluxes ◽  
Experimental Values ◽  
Bp Neural Network Model

Viscosity is an important property of mold fluxes for steel continuous casting. However, direct measurement of viscosity of multi-component systems in a broad range of temperatures and compositions is an onerous work and has some limitations. This paper developed a model using the back propagation (BP) neural network to describe the viscosity of fluorine-free mold fluxes. The BP neural network model was developed and validated using 70 experimental values of viscosity of fluorine-free mold fluxes CaO-SiO2-Al2O3-B2O3-Na2O-TiO2-MgO-Li2O-MnO-ZrO2; 51 of them were used for developing the neural network model and the rest 19 viscosity data for the model validation. Calculated viscosities were in a good agreement with the experimental data. Based on the developed model, the effects of temperature and composition on the viscosity of fluorine-free fluxes were predicted and discussed.

Sign in / Sign up

Export Citation Format

Share Document