Design of Wireless Ambient Air Condition Monitoring System

2015 ◽  
Vol 771 ◽  
pp. 33-37
Author(s):  
C. Bambang Dwi Kuncoro ◽  
M. Anda Falahuddin ◽  
A.J. Ceceng ◽  
Maulana Aditya
Keyword(s):  
Embedded System ◽  
Condition Monitoring ◽  
Rapid Development ◽  
Environmental Parameters ◽  
Ambient Air ◽  
Communication Device ◽  
The Embedded System ◽  
Commercial Off The Shelf ◽  
Condition Monitoring System ◽  
Analog Instrument

In the early day of environment monitoring, the measurement is generally done through manual measurement from simple and analog instrument which suffer from the drawbacks like poor accuracy, need of human intervention, associated parallax errors and durability. The rapid development in electronic technology has made reliable integration of smart electronic sensors, processor, and communication device capable of monitoring environmental parameters more favorably. A system for ambient air condition monitoring has been developed as described in this paper. It is based on the embedded system, smart electronic sensor, commercial off-the-shelf (COTS) components, and the terminal monitor by the Graphical User Interface (GUI).

scholarly journals Software driven approach for Embedded Devices

2020 ◽  
pp. 01-08
Author(s):  
Hrvoje Dodig ◽  
Joško Šoda ◽  
Ivana Golub
Keyword(s):  
Embedded System ◽  
Working Hours ◽  
Software Components ◽  
New Paradigm ◽  
Embedded Devices ◽  
Electronic Circuitry ◽  
Communication Device ◽  
Embedded Design ◽  
Design Paradigm ◽  
The Embedded System

This paper presents the possible new design paradigm that emerged during the author’s design of an embedded communication device for Croatian Navy. Prior to codesign techniques that emerged in 1990's the traditional embedded design methodology involved problem specification, separate hardware and software specification, integration, and the system test as the final step in the embedded device design. Such an approach can potentially lead to numerous iterations and can increase the cost of the development cycle because there are no guarantees that separately developed software will work well with separately designed hardware. Codesign techniques, on the other hand, delay the decision to which components of hardware or software will be used for embedded system until late stages of embedded design process. At the time of the invention of the codesign techniques this seemed as perfectly balanced approach between design of hardware and software spending about equal time in the design of both hardware and software components. However, since the 1990’s the design of embedded devices has changed; nowadays the most working hours are spent in the design of software while the design of hardware requires less working hours due to extensive choice of IC’s and supporting electronic circuits, and due to advancement of EDA software tools. In favor of the software-driven approach presented in this paper, it should be noted that nowadays, there is a large number of freely-available software components and libraries which, if properly utilized, greatly expedite the development of the software part of the embedded system design. Therefore, perhaps it is a suitable time for a new paradigm shift where the design of the hardware is completely dictated by the design of software, and the design of the hardware is simply the matter of selecting proper IC’s and other electronic circuitry that supports the software. In this paper, we present an example of the embedded design using this software-driven design strategy. By the end of this paper, it is shown that software-driven design not only allows the rapid prototyping of embedded devices, but it reduces the possibility of design errors, as well. Keywords: Embedded design; Hardware-software codesign; Software driven design; ARM technology

scholarly journals Automatic Wireless Ambient Air and Weather Condition Monitoring System for Outdoor Environment Monitoring Applications

2020 ◽  
Vol 32 (1) ◽  
pp. 337
Author(s):  
C. Bambang Dwi Kuncoro ◽  
Win-Jet Luo ◽  
M. Rezki Selamet ◽  
Sri Mulyati N ◽  
Kurniawan Andi S ◽  
...  
Keyword(s):  
Monitoring System ◽  
Condition Monitoring ◽  
Weather Condition ◽  
Ambient Air ◽  
Outdoor Environment ◽  
Environment Monitoring ◽  
Monitoring Applications ◽  
Condition Monitoring System

Transplant and Tailor of gSOAP Based on Embedded Linux

2013 ◽  
Vol 303-306 ◽  
pp. 2445-2448
Author(s):  
Lei Wang ◽  
Shi Wei Zhu ◽  
Jun Feng Yu
Keyword(s):  
Embedded System ◽  
Web Service ◽  
Open Source ◽  
Operating Systems ◽  
Rapid Development ◽  
Embedded Linux ◽  
Distributed Applications ◽  
Embedded Platform ◽  
The Embedded System ◽  
Embedded Operating Systems

In this paper, an open source web service software—gSOAP which is transplanted to the embedded Linux is proposed. Web service is not only an application entity for building applications, but also a distributed applications platform which runs operations interoperably. It can also execute all kinds of operating systems (OS) which support HTTP protocol. With the rapid development of the embedded system, lots of open-source software is transplanted to the embedded platform by embedded operating systems.

Application and Research of Embedded Web Server on S3C4510B

2013 ◽  
Vol 462-463 ◽  
pp. 935-939
Author(s):  
Kan Hu ◽  
Yuan Lin Lei
Keyword(s):  
Embedded System ◽  
Computer Technology ◽  
High Efficiency ◽  
Low Cost ◽  
Rapid Development ◽  
Web Server ◽  
Embedded Web Server ◽  
Hardware System ◽  
Embedded Web ◽  
The Embedded System

With the rapid development of computer technology, embedded system is more and more widely used. The embedded hardware system was designed by taking Samsung ARM7TDMI CPU as the core. And a small uClinux system was embedded into this hardware system. Various kinds of applications in uClinux system can be developed. This thesis introduced one of those applications, which is embedded web server and its protocol-HTTP. In this thesis, the embedded system based on ARM had been developed. Our embedded system has the characters of low cost and high efficiency. It is at large applicated on business forwardly.

scholarly journals Design and Development Based on Embedded System

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Peng Huiguo
Keyword(s):  
Control System ◽  
Embedded System ◽  
Market Competition ◽  
Rapid Development ◽  
Social Needs ◽  
System Capacity ◽  
Electronic Technology ◽  
Embedded Control ◽  
Embedded Control System ◽  
The Embedded System

The demand for equipment has been unable to meet the current and future high performance application anddevelopment needs with the rapid development of electronic technology and upgrading of traditional industries inChina. At the same time, intense market competition and technical competition require that the development cycle ofthe product to be as short as possible. Obviously, the software and hardware of embedded system are becoming moreimportant foundation of technological innovation in various fi elds. The embedded system is a combination of advancedcomputer technology, semiconductor technology, electronic technology and the specific application of variousindustries. This determines that it must be a technology-intensive, capital-intensive, highly fragmented and innovativeknowledge integration system. The embedded type is based on the application of computer technology-based hardwareand software can be tailored to adapt to the application system on the function, reliability, cost, size, power and otherstrict requirements of the special computer system. The emergence of consumer appliances and cheap microprocessorsembedded systems will form larger application areas in daily life to as the embedded system usually has low powerconsumption, small size and high integration. Embedded employment is widely embedded in the social needs of largetalent. The content of the paper is clear in the embedded control system overview - development - application writingideas in three chapters gradually. Chapter 1 introduces the defi nition, frame, characteristic, development history, currentsituation and prospect of the embedded control system in detail. The development of the embedded control systemmainly discusses the development steps and methods. The third chapter embedded control system. This paper discussesthe practical application of embedded control system in public life. As the application of these research results in thefi nal summary of the various aspects of the system capacity and analysis of the existing problems for further research toprovide a direction and valuable experience. 

Research on Key Technologies of the Needle Loom Condition Monitoring System

2012 ◽  
Vol 605-607 ◽  
pp. 878-881
Author(s):  
Hui Deng ◽  
Bing Tao Song ◽  
Hao Liu ◽  
Han Zhang ◽  
Sen Yang
Keyword(s):  
Condition Monitoring ◽  
Working Conditions ◽  
Open System ◽  
Remote Monitoring ◽  
Rapid Development ◽  
Processing Conditions ◽  
System Construction ◽  
Monitoring Methods ◽  
Key Technologies ◽  
Condition Monitoring System

Nowadays, condition monitoring and intelligent fault diagnosis methods research of the needling loom in our country is still a blank. How to establish appropriate monitoring methods under different working conditions becomes an important issue. In this article, some methods in terms of the open system construction proposed to work out the problems above. This open system take full advantage of the rapid development of hardware and software technology, and its remote update function enrich remote monitoring methods, providing online or offline information to remote monitoring terminals for different processing conditions, integrated with realizing the needle loom field condition monitoring and physical state online detections.

The Development on Information Collection System Based Internet of Things

2014 ◽  
Vol 644-650 ◽  
pp. 3153-3156 ◽  
Author(s):  
Chuan Wen Luo ◽  
Xiao Wei Yin ◽  
Chun Di Ni
Keyword(s):  
Internet Of Things ◽  
Embedded System ◽  
Information Transfer ◽  
Rapid Development ◽  
Quantitative Information ◽  
Information Collection ◽  
Collection System ◽  
Starting Point ◽  
The Embedded System ◽  
Internet Of Things Technology

Internet of things technology in recent years the rapid development in various fields, the systems based on the perception layer of information collection, through wired or wireless network, information transfer, finally through a variety of application platform for unified handling, control, and implementation content and content, objects and people, and all the goods and the connection of the network. This article is to the quantitative information sets the starting point, through the wireless self-organized network for data transmission, and use the embedded system to unified management of information collection module, finally achieved all the functions of Internet information collection system.

Research on Embedded Data Acquisition and Processing Based on ARM

2016 ◽  
Vol 13 (10) ◽  
pp. 6764-6768
Author(s):  
Wenbo Geng ◽  
Xinying Zhu
Keyword(s):  
Embedded System ◽  
Data Acquisition ◽  
Mobile Communications ◽  
Block Diagram ◽  
Rapid Development ◽  
Industrial Control ◽  
Development Environment ◽  
Operation Process ◽  
The Embedded System ◽  
Data Acquisition And Processing

With the rapid development of the computer computing, the embedded system has been widely used in industrial control, home appliances, mobile communications and other industries. This paper mainly studies the data acquisition and processing of embedded data. First, it introduces the integrated development environment of ARM, and analyzes the operation process of LINUX on ARM. Then, it studies the data processing of the embedded system based on the principles of embedded system and presents the butterfly algorithm according to discrete Fourier transform (DFT) Principle, which is realized on the basis of S3C2410X microprocessor. Finally, the decimation-in-time radix-2 FFT computation block diagram is established, which lays a foundation for the future programming.

Optimization Analysis of XML Embedded System Based on J2ME Platform

2013 ◽  
Vol 427-429 ◽  
pp. 2099-2103
Author(s):  
Jian Hua Ji
Keyword(s):  
Embedded System ◽  
Optimization Design ◽  
Rapid Development ◽  
Integrated System ◽  
Integrated Systems ◽  
Single Application ◽  
Optimization Analysis ◽  
Application System ◽  
The Embedded System ◽  
And Function

In the 21st century, with the rapid development of computer science and technology, the usage of all kinds of embedded system is increasingly common. The function of the embedded system is more and more strong, and there has many kinds of embedded systems, the range of application is gradually expanded. With the requirements of application, embedded system experienced the changes from single application system to integrated system. However, because the current integrated systems mostly are limited to the stand-alone usage, this does not give full play to the application and function of the embedded system. The paper was based on the limitations of XML embedded system of the J2ME platform, and it provided optimization design to current limitations, at the same time it made the application and function get the promotion.

Study on the Needle Loom Condition Monitoring System Based on Working Condition Parameters

2011 ◽  
Vol 219-220 ◽  
pp. 709-712
Author(s):  
Hui Deng ◽  
Zhang Li
Keyword(s):  
Monitoring System ◽  
Condition Monitoring ◽  
Working Conditions ◽  
Remote Monitoring ◽  
Working Condition ◽  
Rapid Development ◽  
Processing Conditions ◽  
System Construction ◽  
Monitoring Methods ◽  
Condition Monitoring System

Nowadays, the condition monitoring and intelligent fault diagnosis methods research of the needling loom in our country is still a blank. How to establish the appropriate monitoring methods under different working conditions becomes an important issue. In this article, some methods in terms of the open system construction proposed to work out the problems above, which is the Needle Loom condition monitoring system based on working condition parameters. This system take full advantage of the rapid development of hardware and software technology, providing online or offline information to remote monitoring terminals for different processing conditions, enriching remote monitoring data sources, integrated with realizing the needle loom field condition monitoring and the physical state online detections.

Sign in / Sign up

Export Citation Format

Share Document