Unsteady Aerodynamic Characteristics of the Pitched Supersonic Biplane

2015 ◽  
Vol 798 ◽  
pp. 523-530 ◽  
Author(s):  
Cheng Xi Zhao ◽  
Ru Hao Hua ◽  
Zheng Yin Ye ◽  
Yue Wen Jiang
Keyword(s):  
Flow Pattern ◽  
Aerodynamic Characteristics ◽  
Wave Drag ◽  
Basis Functions ◽  
Flow Disturbance ◽  
Pitch Motion ◽  
Unsteady Aerodynamic ◽  
Computational Fluid Dynamics Cfd ◽  
Critical Amplitudes ◽  
Pattern Transformation

In this work, supersonic biplanes of the Busemann concept have been analysed, focusing on the unsteady aerodynamic characteristic due to flow disturbance using Computational Fluid Dynamics (CFD) codes in viscous flow. Flow disturbance is modelled by sinusoidal pitch motion simulated by mesh morphing using radial basis functions (RBF) method. The results suggest that there are two flow patterns of the Busemann biplane: oblique wave sequences flow (Pattern A) and choke-flow (Pattern B) with higher wave drag. Unsteady aerodynamic disturbance represented by pitch motion may cause flow pattern transformation. We have also obtained that Pattern B is more stable than Pattern A and choke-flow cannot be eliminated even after returning to the initial flight attitude. Moreover, amplitudes and frequencies of sinusoidal pitch motion play important roles in flow pattern transformation and there exist critical amplitudes and frequencies.

Design Methodology and Unsteady Aerodynamic Characteristics of a Rectangular Variable Geometry Hypersonic Inlet

2013 ◽  
Vol 275-277 ◽  
pp. 433-441
Author(s):  
Jian Teng ◽  
Hua Cheng Yuan
Keyword(s):  
Design Methodology ◽  
Flow Direction ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Design Parameters ◽  
Variable Geometry ◽  
Flow Disturbance ◽  
Unsteady Aerodynamic ◽  
Hypersonic Inlet ◽  
Flight Range

Design methodology of a rectangular variable geometry hypersonic inlet whose cowl lip is translatable along flow direction is clarified in current study and recommendation of key design parameters are given. Unsteady Reynolds-averaged Navier-Stokes (uRANS) calculation were carried out to investigate the feasibility and unsteady aerodynamic characteristics of this inlet. Results indicate that by stretching the movable lip of a model inlet upstream, mass flow rate will increases apparently due to the increases of inlet internal duct entrance area. Stretching the movable lip upstream will decrease CR of the model inlet which is favorable for the start or restart of the inlet from an unstarted status. The lip translating process is smooth and will not induce large amplitude flow disturbance within inlet duct. The movable lip is conducive to improve the aeropropulsive performance of the hypersonic inlet in wide flight range

scholarly journals Effect of the Coupled Pitch–Yaw Motion on the Unsteady Aerodynamic Performance and Structural Response of a Floating Offshore Wind Turbine

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 290
Author(s):  
Ziwen Chen ◽  
Xiaodong Wang ◽  
Shun Kang
Keyword(s):  
Numerical Simulation ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Response ◽  
Aerodynamic Characteristics ◽  
Aerodynamic Performance ◽  
Offshore Wind ◽  
Pitch Motion ◽  
Unsteady Aerodynamic ◽  
Platform Motions

The floating offshore wind turbines (FOWTs) have many more advantages than the onshore wind turbines, but they also have more complicated aerodynamic characteristics due to complex platform motions. The research objective of this paper is to investigate unsteady aerodynamic characteristics of a FOWT under the pitch, yaw, and coupled pitch–yaw platform motions using the computational fluid dynamics (CFD) method in the Unsteady Reynolds Averaged Navier-Stokes (URANS) simulations. The pitch, yaw, and coupled pitch–yaw motions are studied separately to analyze the platform motions’ effects on the rotor blade. The accuracy of the numerical simulation method is verified, and the overall performances, including power and thrust, are discussed. In addition, the comparison of total aerodynamic performance, force coefficients at different spans and structural dynamic response is provided. The numerical simulation results show that the platform pitching is the main influencing factor of power fluctuation, and the average thrust values of the pitch, yaw, and coupled motions are consistent regardless of the frequency value. The angle of attack (AOA) of airfoils is much more sensitive to the yaw motion, while the blade normal and tangential forces are mainly affected by pitch motion. As for the structural response, the results suggest that the aerodynamic loads of the wind turbine are more sensitive to the pitch motion, which is confirmed by the thrust force and torque of each blade during the platform motions.

scholarly journals Research on aerodynamic characteristics of two-stage axial micro air turbine spindle for small parts machining

2020 ◽  
Vol 12 (12) ◽  
pp. 168781402098437
Author(s):  
Liu Jiang ◽  
Guo Zhiping ◽  
Miao Shujing ◽  
He Xiangxin ◽  
Zhu Xinyu
Keyword(s):  
High Speed ◽  
Aerodynamic Characteristics ◽  
Maximum Efficiency ◽  
Two Stage ◽  
Output Torque ◽  
Air Turbine ◽  
Solid Foundation ◽  
Computational Fluid Dynamics Cfd ◽  
Micro Machine ◽  
Small Parts

In order to meet the requirements of output torque, efficiency and compact shape of micro-spindles for small parts machining, a two-stage axial micro air turbine spindle with an axial inlet and outlet is proposed. Based on the k-ω turbulence model of SST, the flow field and operation characteristics of the two-stage axial micro air turbine spindle were studied using computational fluid dynamics (CFD) combined with an experimental study. We obtained the air turbine spindle under different working conditions of the loss and torque characteristics. When the inlet pressure was 300 KPa, the output speed of the two-stage turbine was 100,000 rpm, 9% higher than that of a single-stage turbine output torque. The total torque reached 6.39 N·mm, and the maximum efficiency of the turbine and the spindle were 42.2% and 32.3%, respectively. Through the research on the innovative structure of the two-stage axial micro air turbine spindle, the overall performance of the principle prototype has been significantly improved and the problems of insufficient output torque and low working efficiency in high-speed micro-machining can be solved practically, which laid a solid foundation for improving the machining efficiency of small parts and reducing the size of micro machine tool.

Effect of Shock Wave Behavior on Unsteady Aerodynamic Characteristics of Oscillating Transonic Compressor Cascade

2021 ◽  
Author(s):  
Jiuliang Gan ◽  
Toshinori Watanabe ◽  
Takehiro Himeno
Keyword(s):  
Shock Wave ◽  
Aerodynamic Force ◽  
Aerodynamic Characteristics ◽  
Fast Response ◽  
Influence Coefficient ◽  
Compressor Cascade ◽  
Blade Vibration ◽  
Unsteady Pressure ◽  
Transonic Compressor ◽  
Unsteady Aerodynamic

Abstract The unsteady behavior of the shock wave was studied in an oscillating transonic compressor cascade. The experimental measurement and corresponding numerical simulation were conducted on the cascade with different shock patterns based on influence coefficient method. The unsteady pressure distribution on blade surface was measured with fast-response pressure-sensitive paint (PSP) to capture the unsteady aerodynamic force as well as the shock wave movement. It was found that the movement of shock waves in the neighboring flow passages of the oscillating blade was almost anti-phase between the two shock patterns, namely, the double shocks pattern and the merged shock pattern. It was also found that the amplitude of the unsteady pressure caused by the passage shock wave was very large under the merged shock pattern compared with the double shocks pattern. The stability of blade vibration was also analyzed for both shock patterns including 3-D flow effect. These findings were thought to shed light on the fundamental understanding of the unsteady aerodynamic characteristics of oscillating cascade caused by the shock wave behavior.

scholarly journals Aerodynamic Damping Characteristics of a Transonic Turbine Cascade

1999 ◽  
Author(s):  
Mizuho Aotsuka ◽  
Toshinori Watanabe ◽  
Yasuo Machida
Keyword(s):  
Phase Angle ◽  
Aerodynamic Force ◽  
Turbine Blades ◽  
Aerodynamic Characteristics ◽  
Influence Coefficient ◽  
Suction Surface ◽  
Aerodynamic Damping ◽  
Unsteady Aerodynamic ◽  
Design Case ◽  
Oscillation Instability

The unsteady aerodynamic characteristics of oscillating thin turbine blades were studied both experimentally and numerically to obtain the comprehensive knowledge on the aerodynamic damping of the blades operating in transonic flows. The experiment was carried out in a linear cascade tunnel by use of the influence coefficient method. The two flow conditions were adopted, namely, a near-design condition and an off-design condition with a higher back pressure. In the results for the near-design case, a strong vibration instability was observed in the positive side of the interblade phase angle. In the off-design case, however, the instability did not appear for almost all the interblade phase angles. A drastic change was found in the phase angle of unsteady aerodynamic force between the two cases, which change was a governing factor for the oscillation instability. Numerical simulation based on 2-D Euler equation revealed that the phase change came from the change in phase of the unsteady surface pressure across the shock impingement point on the blade suction surface in the off-design case. The numerical results also showed that the aerodynamic damping increased with increasing reduced frequency, and that the oscillation instability disappeared.

scholarly journals Pipeline Compressor Redesign With the Consideration of Both Noise and Performance

2000 ◽  
Author(s):  
Yuri I. Biba ◽  
Zheji Liu ◽  
D. Lee Hill
Keyword(s):  
High Efficiency ◽  
Aerodynamic Characteristics ◽  
The Body ◽  
Design Parameters ◽  
Original Design ◽  
Tonal Noise ◽  
Experimental Performance ◽  
Expected Performance ◽  
Computational Fluid Dynamics Cfd ◽  
And Performance

A complete effort to redesign the aerodynamic characteristics of a single-stage pipeline compressor is presented. The components addressed are the impeller, diffuser region, and the volute. The innovation of this effort stems from the simultaneous inclusion of both the noise and aerodynamic performance as primary design parameters. The final detailed flange-to-flange analysis of the new components clearly shows that the operating range is extended and the tonal noise driven by the impeller is reduced. This is accomplished without sacrificing the existing high efficiency of the baseline machine. The body of the design effort uses both Computational Fluid Dynamics (CFD) and vibro-acoustics technology. The predictions are anchored by using the flange-to-flange analysis of the original design and its experimental performance data. By calculating delta corrections and assuming that these deltas are approximately the same for the new design, the expected performance is extrapolated.

Sign in / Sign up

Export Citation Format

Share Document