Temperature Field Analysis of High Efficiency Linear Pumping Unit

2017 ◽  
Vol 872 ◽  
pp. 246-250
Author(s):  
Yan Liu ◽  
Sen Wang ◽  
Yang Yang Zhao
Keyword(s):  
Finite Element Analysis ◽  
Temperature Field ◽  
Heat Dissipation ◽  
High Efficiency ◽  
Field Analysis ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Pumping Unit ◽  
Motor Cooling

The generation of heat source of high efficiency linear pumping unit was analyzed. The calculation method of motor loss and heat dissipation coefficient was given. The finite element analysis software was used to simulate and analyze the temperature field of the linear pumping unit in the phase of constant motion and the starting and reversing phase. According to the analysis, it was concluded that the reasonable optimization of linear motor cooling structure can ensure the good temperature characteristics.

Design Research of Steel Pipe Combination of Angle Steel Tower of XiYue 220kV Cross Section

2013 ◽  
Vol 470 ◽  
pp. 408-411 ◽  
Author(s):  
Yan Zhong Ju ◽  
Xiao Xu Fu ◽  
Neng Xian Zeng
Keyword(s):  
Finite Element Analysis ◽  
Cross Section ◽  
Design Research ◽  
Axial Stress ◽  
Steel Pipe ◽  
Stress Difference ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Angle Steel

Given the path situation of Xiyue substation 220kV four outlets project crossing Shunde waterway section,this article applies of Dao Heng tower full stress analysis software and the finite element analysis software ANSYS to two steel pipe combination of angle steel towers to carry on design research,contrast axial stress of two kinds of software,analyse the reasons of axial stress difference.

Finite Element Analysis and Optimization of the Truss of Installing Wave-Maker Based on ANSYS

2013 ◽  
Vol 313-314 ◽  
pp. 1038-1041
Author(s):  
Shou Jun Wang ◽  
Xing Xiong ◽  
Chao Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Design Parameters ◽  
Analysis Software ◽  
Element Analysis ◽  
Large Span ◽  
The Finite Element Analysis ◽  
Wave Maker

According to uncertainty of the design parameters for large span truss of installing wave-maker, in order to avoid the waste of materials,the truss is analyzed based on the finite element analysis software ANSYS to find out its weaknesses and various parts of the deformation. On the premise of ensuring the intensity and stiffness, the weight of the truss is reduced by adjusting its sizes and selecting different profiles, so as to achieve the optimization of the truss of installing wave-maker.

scholarly journals Numerical Simulation on Thermodynamics Performance in the Fireproof Sealing by Finite Element Analysis

2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Shuai Gao ◽  
Guoqing Zhu ◽  
Yunji Gao ◽  
Guoqiang Chai ◽  
Jinju Zhou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Field ◽  
Thermal Gradient ◽  
Thermal Flux ◽  
Ansys Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Thermodynamic Performance ◽  
Temperature Time

In this paper, the finite element analysis was firstly employed to investigate the thermal analysis on two fireproof sealing models with ANSYS software under HC standard temperature-time condition. The main thermal parameters were analyzed and obtained, including temperature field, thermal flux, and thermal gradient. After comparing the two fireproof sealing models, the major conclusions are summarized as follows: In terms of temperature field, the temperature on the left side of the first model ranges from 60 to 524°C in. In contrast, the highest temperature on the left side of the second model eventually reaches below 151°C. Moreover, the vectors of thermal gradient in the first model are compared with the second model, and the temperature gradient disturbance is more obvious in the second fireproof sealing model, which is better to slow down temperature spreading. The accelerated speed of E1 and G1 is 0.0096°C/s and 0.0619°C/s partly, which are far more than C2 and F2 with values of 0.0028°C/s and 0.0078°C/s, respectively. In a word, the performance of the first fireproof sealing model is inferior to the second fireproof sealing model. The conclusions of the study are meaningful to improve the thermodynamic performance of the fireproof sealing in the converter station.

The Finite-Element Analysis of Cylindrical Helical Tooth Milling Cutter Based on Marc

2011 ◽  
Vol 52-54 ◽  
pp. 1147-1152
Author(s):  
Guang Guo Zhang ◽  
Wei Jiang ◽  
Hong Hua Zhang ◽  
Huan Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cutting Forces ◽  
Element Model ◽  
Local Deformation ◽  
Analysis Software ◽  
Element Analysis ◽  
Milling Cutter ◽  
Cutter Life ◽  
The Finite Element Analysis

In the traditional designs of milling cutter, we cannot get the required accuracy of machining as there may be local deformation on the edges, even more the cutter can break down. Aiming at this situation, a finite-element model of straight pin milling cutter with helical tooth are built using Marc, a nonlinear finite-element analysis software, the different cutting forces of the milling cutter during the cutting process are analyzed and the cutting forces of the milling cutter at different parameters are studied. We get the stress, the strain and the temperature distribution of the milling cutter in different situation. Our work offer a theoretical basis of improving stress of the cutter, designing the structure of cutters reasonably and analyzing the cutter failure as well as a new method of analysis and calculation of the cutter life and strength.

A Road Slope Stability Analysis

2012 ◽  
Vol 594-597 ◽  
pp. 642-646
Author(s):  
Anji Yu ◽  
Jie Liu ◽  
Dong Dong Yang ◽  
Hua Feng Cao ◽  
Xiao Pei Yang
Keyword(s):  
Finite Element Analysis ◽  
Slope Stability ◽  
Development Process ◽  
Strength Reduction ◽  
Analysis Software ◽  
Element Analysis ◽  
The Road ◽  
Cutting Slope ◽  
The Finite Element Analysis ◽  
Road Slope

In view of highway slope stability problems, this paper puts forward the method that numerical modeling of the road slope by the finite element analysis software —ADINA, with the Gravity Loading Proportion Methodto calculate the slope stability coefficient, deeply research the development process of deformation, breakage characteristics and stability of road high cutting slope. Comparison with the results obtained by the strength reduction FEM proposed by AcademicianYingrenZhengshows that the proposed method is more simple and reasonable to determine slope stability or not.

The Steady-State Temperature Field Analysis of the 3D Rolling Tire Based on Adina FEA Software

2009 ◽  
Vol 87-88 ◽  
pp. 518-523 ◽  
Author(s):  
Jing Li ◽  
Yan He ◽  
Zhen Chao Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Field ◽  
Steady State ◽  
Field Analysis ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Steady State Temperature ◽  
Steady Temperature Field

Based on the Adina finite element analysis software, 3D axisymmetric finite element analysis model of the 205/75R15 PCR tire was established, the steady temperature field of rolling tire was simulated, and the thermal distribution colored cloud diagram of steady-state temperature field of 3D rolling tire which directly shows the temperature distribution of each section of tire was analyzed to offer certain guidance to the improvement of tire structure and rubber formula.

Design of a New Piezo-Electric Micro-Gripper Based on Flexible Magnifying Mechanism

2012 ◽  
Vol 201-202 ◽  
pp. 907-911 ◽  
Author(s):  
Feng Yi Feng ◽  
Yu Guo Cui ◽  
Fei Xue ◽  
Liang En Wu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Response Analysis ◽  
Analysis Software ◽  
Maximum Displacement ◽  
Element Analysis ◽  
Micro Gripper ◽  
The Finite Element Analysis ◽  
Harmonic Response Analysis ◽  
Finger Tip

Based on the requirements of that the finger can move in parallel, and the displacement of the finger can be detected, the micro-gripper driven by piezoelectric actuator is designed based on the displacement amplification structure with the flexure hinge. The static analysis, the modal analysis, the harmonic response analysis and the transient response analysis of the micro-gripper are carried out by using the finite element analysis software ANSYS. The results of the finite element analysis show that the finger is fully able to move in parallel, and can detect the displacement of the finger; the maximum displacement of the finger is about 101 μm, the first natural frequency is about 130 Hz; the finger tip displacement under the 1 μm step input is about 20 μm, the fingertip vibration is about ±2 μm.

Finite Element Analysis of the Greenhouse Canopy Effect with Seismic Load

2011 ◽  
Vol 368-373 ◽  
pp. 1125-1129
Author(s):  
Chang Jiang Liu ◽  
Jin Long Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Seismic Analysis ◽  
Element Model ◽  
Seismic Load ◽  
Analysis Software ◽  
Element Analysis ◽  
Canopy Effect ◽  
The Finite Element Analysis ◽  
The Finite Element Model

The finite element model about greenhouse canopy of seismic analysis was setted up, The finite element analysis software ANSYS was used to study structure displacement, stress analysis on greenhouse shed. The results showed that the dangerous part of the canopy were located on upper chord members,lower chord members, web members of the framework and the lower and upper, the inside of both sides of the wall with seismic load.Corresponding to this results ,the main destroied form were the framework damage caused by the bending deformation of upper chord members, lower chord members and the upper web members and the unstability caused by the distortion of both sides of the wall.

Sign in / Sign up

Export Citation Format

Share Document