Experimental Study on Mechanical Properties of Hybrid Fiber Reinforced Full Lightweight Aggregate Concrete

2011 ◽  
Vol 197-198 ◽  
pp. 911-914 ◽  
Author(s):  
Li Yun Pan ◽  
Hao Yuan ◽  
Shun Bo Zhao
Keyword(s):  
Mechanical Properties ◽  
Apparent Density ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Mass Content ◽  
Hybrid Fiber ◽  
Aggregate Concrete

Tests were carried out to study mechanical properties of hybrid fiber reinforced full lightweight aggregate concrete (HFRFLAC), the hybrid fiber was composed by steel fiber and polypropylene fiber, the expanded-shale and lightweight sand were used as coarse and fine aggregates. The apparent density and strengths in cubic compressive, splitting tensile and flexural tensile states of HFRFLAC were obtained. The results show that the average dry apparent density increases with the increasing cement content, which is much more affected by fraction of steel fiber by volume than mass content of polypropylene fiber; the tensile strengths increase somewhat with the increasing mass content of polypropylene fiber; all of the strengths increase with the increasing fraction of steel fiber by volume, and obvious are the enhancement of tensile strengths; there are somewhat relevance between the effects of polypropylene fiber and steel fiber on mechanical properties of HFRFLAC.

Mechanical Properties of Steel Fiber Reinforced Lightweight Aggregate Concrete

2011 ◽  
Vol 366 ◽  
pp. 12-15 ◽  
Author(s):  
Chang Yong Li ◽  
Huai Chen ◽  
Shun Bo Zhao
Keyword(s):  
Mechanical Properties ◽  
Steel Fiber ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Aggregate Concrete ◽  
Flexural Tensile Strength ◽  
Axial Tensile ◽  
Mix Proportion ◽  
Expanded Shale

Experiments were conducted to study the basic properties of steel fiber reinforced lightweight aggregate concrete (SFLAC) mixed with machine-made sand and expanded-shale. The effects of sand ratio and cement content on the cubic and axial compressive strengths, splitting and axial tensile strengths, flexural tensile strength as well as compressive and tensile elastic modulus of SFLAC are analyzed comparing with those of LAC in the same conditions. Data from the experiments shows that, the steel fiber has advantages to every mechanical properties of LAC especially to the tensile strengths, and also modifies the abruptness failure states of LAC into multi-cracked characteristics of SFLAC. The optimum mix proportion is suggested for getting better properties of SFLAC.

scholarly journals Behavior of high performance artificial lightweight aggregate concrete reinforced with hybrid fibers

2018 ◽  
Vol 162 ◽  
pp. 02001
Author(s):  
Wasan Khalil ◽  
Hisham Ahmed ◽  
Zainab Hussein
Keyword(s):  
Tensile Strength ◽  
Aspect Ratio ◽  
Steel Fiber ◽  
Fiber Type ◽  
Lightweight Aggregate ◽  
Plain Concrete ◽  
Splitting Tensile Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber

In this investigation, sustainable High Performance Lightweight Aggregate Concrete (HPLWAC) containing artificial aggregate as coarse lightweight aggregate (LWA) and reinforced with mono fiber, double and triple hybrid fibers in different types and aspect ratios were produced. High performance artificial lightweight aggregate concrete mix with compressive strength of 47 MPa, oven dry density of 1828 kg/m3 at 28 days was prepared. The Fibers used included, macro hooked steel fiber with aspect ratio of 60 (type S1), macro crimped plastic fiber (P) with aspect ratio of 63, micro steel fiber with aspect ratio of 65 (type S), and micro polypropylene fiber (PP) with aspect ratio of 667. Four HPLWAC mixes were prepared including, one plain concrete mix (without fiber), one mono fiber reinforced concrete mixes (reinforced with plastic fiber with 0.75% volume fraction), one double hybrid fiber reinforced concrete mixes (0.5% plastic fiber + 0.25% steel fiber type S), and a mix with triple hybrid fiber (0.25% steel fiber type S1+ 0.25% polypropylene fiber + 0.25% steel fiber type S). Fresh (workability and fresh density) and hardened concrete properties (oven dry density, compressive strength, ultrasonic pulse velocity, splitting tensile strength, flexural strength, static modules of elasticity, thermal conductively, and water absorption) were studied. Generally, mono and hybrid (double and triple) fiber reinforced HPLWAC specimens give a significant increase in splitting tensile strength and flexural strength compared with plain HPLWAC specimens. The percentage increases in splitting tensile strength for specimens with mono plastic fiber are, 20.8%, 31.9%, 36.4% and 41%, while the percentage increases in flexure strength are 19.5%, 37%, 33.9% and 34.2% at 7, 28, 60, 90 days age respectively relative to the plain concrete. The maximum splitting tensile and flexure strengths were recorded for triple hybrid fiber reinforced HPLWAC specimens. The percentage increases in splitting tensile strength for triple hybrid fiber reinforced specimens are 19.5%, 37%, 33.9% and 34.2%, while the percentage increases in flexure strength are 50.5%, 62.4. %, 66.8% and 62.2% at 7, 28, 60 and 90 days age respectively relative to the plain concrete specimens.

Mechanical Properties of Fiber Reinforced Lightweight Aggregate Concrete

2011 ◽  
Vol 477 ◽  
pp. 274-279 ◽  
Author(s):  
Yi Xu ◽  
Lin Hua Jiang ◽  
Hong Qiang Chu ◽  
Lei Chen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Water Hyacinth ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Lightweight Aggregate ◽  
Splitting Tensile Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Types

In this study, the effects of fiber types on the mechanical properties of lightweight aggregate concretes were investigated. Three types of fibers, namely, polypropylene fiber, steel fiber and water hyacinth (Eichhornia crassipes) fiber, and two types of lightweight aggregates, namely, expanded polystyrene and ceramsite were used. The compressive strength and splitting tensile strength of concretes were tested. The results show that both the compressive strength and the splitting tensile strength were improved by adding a reasonable volume of steel fiber and polypropylene fiber into LWAC. The addition of water hyacinth fiber had little effect on the compressive strength of LWAC, while a little increase was observed in the splitting tensile strength.

Sign in / Sign up

Export Citation Format

Share Document