Experimental Study of Screw Speed Effects on Quality of Short Fiber-Rubber Composite Material

2011 ◽  
Vol 221 ◽  
pp. 369-372 ◽  
Author(s):  
Chuan Sheng Wang ◽  
De Wei Zhang ◽  
Hui Guang Bian ◽  
Xiao Bo Wang ◽  
Lei Guo
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Composite Material ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Experimental Results ◽  
Short Fibers ◽  
Screw Speed ◽  
Rubber Composite

During the extruding process of short fiber-rubber composite material, screw speed is an important factor which influences the orientation of short fibers, as well as the physical and mechanical properties of short fiber-rubber composite material. The effects of different screw speeds on physical and mechanical properties of short fiber-rubber composite material have been studied by experimental study. In the experiments, the screw speeds were 10rpm, 15rpm, 20rpm, 25rpm and 30rpm respectively. The experimental results indicated that when the screw speed was 15rpm, the physical and mechanical properties of short fiber-rubber composite material are better.

Effects of Rotor Speed on Manufacturing Process of Short Fiber-Rubber Composite Material

2011 ◽  
Vol 221 ◽  
pp. 350-355 ◽  
Author(s):  
De Wei Zhang ◽  
Chuan Sheng Wang ◽  
Guang Yi Lin
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Composite Material ◽  
Manufacturing Process ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Mixing Process ◽  
Rotor Speed ◽  
Rubber Composite

Rotor Speed is an important factor which impacts the mixing process and quality of mixed rubber greatly. The effects of different rotor speeds on manufacturing process of short fiber-rubber composite material have been studied by experimental study. In the experiments, the rotor speeds were 50rpm, 60rpm, 70rpm and 80rpm respectively. The experimental results indicated that the mixed rubber after vulcanized had better physical and mechanical properties as the rotor speed was 70rpm. So the rotor speed that is 70rpm has been chosen for manufacturing short fiber-rubber composite material.

Research on Vulcanization Process of Short Fiber-Rubber Composite Material

2012 ◽  
Vol 501 ◽  
pp. 325-329
Author(s):  
Chuan Sheng Wang ◽  
De Wei Zhang ◽  
Lei Guo ◽  
Xian Kui Zeng ◽  
Xiao Bo Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Short Fibers ◽  
Iron Wire ◽  
Rubber Composite ◽  
Fibers Orientation ◽  
Vulcanization Process

Vulcanization process is the last step of manufacturing rubber products. For tire tread which is made of short fiber rubber composite material, vulcanization is complex due to during vulcanization process the flow of mixed rubber maybe change short fibers orientation. As a result, during vulcanization process, several pieces of iron wire have been put in the mold to play the role of tire patterns for the first step research. The experimental results indicate that the flow of mixed rubber would not change short fibers orientation greatly, and physical and mechanical properties of short fiber-rubber composite material keep as good as that vulcanized without iron wire.

Experimental Study on Manufacturing Process of Short Fiber-Rubber Composite Material Using New Type Six-Wing Synchronous Rotor

2009 ◽  
Vol 87-88 ◽  
pp. 317-322
Author(s):  
De Wei Zhang ◽  
Chuan Sheng Wang
Keyword(s):  
Experimental Study ◽  
Composite Material ◽  
Manufacturing Process ◽  
Short Fiber ◽  
Short Fibers ◽  
Rubber Composite ◽  
New Type ◽  
Mechanical Performances

A new type of six-wing synchronous rotor has been designed and manufactured for mixing requirements of the short fiber-rubber composite material. During the manufacturing process of the composite material, different addition proportions of the short fibers have been used. The physical and mechanical performances of the short fiber-rubber composite material have been investigated. The new type rotor meets the mixing requirements of the short fiber-rubber composite material, with the best addition proportion of the short fibers.

Effects of Different Structure Rotors on Mixing Process and Quality of Short Fiber-Rubber Composite Material

2009 ◽  
Vol 87-88 ◽  
pp. 277-281
Author(s):  
Chuan Sheng Wang ◽  
De Wei Zhang ◽  
Hui Guang Bian
Keyword(s):  
Composite Material ◽  
Composite Materials ◽  
Short Fiber ◽  
Experimental Results ◽  
Mixing Process ◽  
Mixing Performance ◽  
Rubber Composite ◽  
New Type ◽  
Better Than

The structure of rotors is an important factor, which impacts the quality of the mixed rubber. For the short fiber-rubber composite material, the structure of the rotors is most important. Through the experiments study, the mixing performances of four-wing synchronous rotor, six-wing synchronous rotor and new type of six-wing synchronous varying clearance rotor have been studied. The experimental results indicated that the mixing performance of the new type rotor is much better than the four-wing and six-wing synchronous rotor for the mixing of short fiber-rubber composite materials.

Experimental Study on Effects of Filling Factor and Polyester Short Fiber Addition on Mixing of Short Fiber-Rubber Composite Material

2012 ◽  
Vol 501 ◽  
pp. 453-456
Author(s):  
Xian Kui Zeng ◽  
De Wei Zhang ◽  
Chuan Sheng Wang ◽  
Hui Guang Bian
Keyword(s):  
Experimental Study ◽  
Composite Material ◽  
Filling Factor ◽  
Short Fiber ◽  
Experimental Results ◽  
Mixing Process ◽  
Rubber Composite ◽  
Fiber Addition

Filling factor and polyester short fiber addition impact the mixing process and performances of mixed rubber greatly. The effects of filling factor and polyester short fiber addition on mixing short fiber-rubber composite material have been studied by experimental study. And according to the experimental results, at the condition of filling factor was 0.6 and polyester short fiber addition was 3, the performances of mixed rubber were best.

Experimental Study of Relations between Synchronous Rotor Speed and Mixing Process

2012 ◽  
Vol 501 ◽  
pp. 243-246
Author(s):  
Xian Kui Zeng ◽  
Shuai An ◽  
De Wei Zhang ◽  
Dong Wang
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Temperature Increase ◽  
Physical And Mechanical Properties ◽  
Experimental Results ◽  
Mixing Process ◽  
Rotor Speed ◽  
Unit Consumption ◽  
Internal Mixer ◽  
Rotor Structure

Rotor speed is one of the most important technical characteristics of the internal mixer. The effects of rotor speed on mixing process have been studied. In the experiments, three types of synchronous rotors which were two-wing synchronous rotor, four-wing synchronous rotor and six-wing synchronous rotor were used. The experimental results indicated that there was a proper speed of different rotor structure for mixing process. And along with the increase of rotor speed, the maximum power, the unit consumption of energy and discharging temperature increase, while the physical and mechanical properties of mixed rubber got a better value.

Effect of Die Structure on Radial Orientation of Short Fiber in Tire Tread and its Performance

2012 ◽  
Vol 501 ◽  
pp. 247-252 ◽  
Author(s):  
De Wei Zhang ◽  
Chuan Sheng Wang ◽  
Guang Yi Lin ◽  
Shao Ming Li ◽  
Chun Ping Chen
Keyword(s):  
Composite Material ◽  
Short Fiber ◽  
Channel Length ◽  
Channel Height ◽  
Manufacturing Processes ◽  
Short Fibers ◽  
Orientation Degree ◽  
Radial Orientation ◽  
Die Structure ◽  
Rubber Composite

Extrusion and molding is one of the most important manufacturing processes of short fiber-rubber composite material. In order to be used to tire tread, the short fibers in rubber are wanted to be radial orientated. But the orientation of short fibers depends on the die structure, and the performances of short fiber-rubber composite material depend on the radial orientation degree of short fibers. So, the die structure has been studied by experiments in order to get a proper die structure for manufacturing of short fiber-rubber composite material. The experimental results indicate that the proper die structure parameters are: the molding length is 15mm, the molding height is 9mm, the channel length is 75mm, the channel height is 12mm and the channel angle is 135º.

Experimental Investigation on Electroformed Copper-Based Zirconia Nanocomposites Aided by Ultrasonic

2013 ◽  
Vol 584 ◽  
pp. 73-78
Author(s):  
Zhi Yong Li ◽  
Hong Bin Cui ◽  
Pei Yu Dong ◽  
Tao Liu
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Composite Material ◽  
Process Parameters ◽  
Electrode Material ◽  
Rotational Speed ◽  
Experimental Results ◽  
Ultrasonic Frequency ◽  
Micro Hardness

To improve the mechanical properties of the EDM electrode material, the electroforming process for fabricating copper-nanozirconia (ZrO2) particles composite aided by ultrasonic has been presented. In this research, some vital process parameters such as concentration of ZrO2, rotational speed and ultrasonic frequency have been evaluated. Two inspection criteria, content of ZrO2and micro hardness of deposited layer were employed to evaluate the fabrication quality of copper-nanozirconia (ZrO2) composite material. The experimental results indicate that nanocomposites grains electroformed aided by ultrasonic are refined. Their organizations are more uniform and dense, the surface is flatter and the microhardness of nanocomposites is significantly improved.

Experimental Study on Epoxy Asphalt Binder

2010 ◽  
Vol 168-170 ◽  
pp. 916-919
Author(s):  
Ke Fei Liu
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Asphalt Binder ◽  
Physical And Mechanical Properties ◽  
Technical Requirement ◽  
Basic Requirement ◽  
Application Process ◽  
Epoxy Asphalt ◽  
Steel Deck ◽  
Thermosetting Epoxy

Epoxy asphalt has fundamentally changed the thermoplastic of asphalt and endowed the asphalt with excellent physical and mechanical properties. This paper analyses the developing technical requirement of thermosetting epoxy asphalt and points out its main problems during preparation and application process. Aiming at the steel deck paving characteristics, the author has independently developed epoxy asphalt binder and tested its performances, the results have showed that this binder can meet the basic requirement of various pavings, and its further research are in process.

New Rotor with Variable Clearance in the Short Fiber Rubber Composite Mixing

2013 ◽  
Vol 328 ◽  
pp. 387-392
Author(s):  
Cai Jun Liu ◽  
Chuan Sheng Wang
Keyword(s):  
Production Efficiency ◽  
Short Fiber ◽  
Short Fibers ◽  
Mixing Chamber ◽  
Small Clearance ◽  
Rubber Composite ◽  
Mixing Quality ◽  
And Performance

The mixing mechanism of short fiber/rubber composite was analyzed. The clearance between the rotor edge peak and mixing chamber influenced mixing, dispersion and length of the short fibers in compound. The new rotor was designed with variable clearance. The large clearance gap improve the mixing, and the small clearance gap helped to improve the dispersion of short fiber. The mixing quality and performance of short fiber/rubber composite were improved by using the new rotor, and the production efficiency increased.

Sign in / Sign up

Export Citation Format

Share Document