Experimental Study of Relations between Synchronous Rotor Speed and Mixing Process

2012 ◽  
Vol 501 ◽  
pp. 243-246
Author(s):  
Xian Kui Zeng ◽  
Shuai An ◽  
De Wei Zhang ◽  
Dong Wang
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Temperature Increase ◽  
Physical And Mechanical Properties ◽  
Experimental Results ◽  
Mixing Process ◽  
Rotor Speed ◽  
Unit Consumption ◽  
Internal Mixer ◽  
Rotor Structure

Rotor speed is one of the most important technical characteristics of the internal mixer. The effects of rotor speed on mixing process have been studied. In the experiments, three types of synchronous rotors which were two-wing synchronous rotor, four-wing synchronous rotor and six-wing synchronous rotor were used. The experimental results indicated that there was a proper speed of different rotor structure for mixing process. And along with the increase of rotor speed, the maximum power, the unit consumption of energy and discharging temperature increase, while the physical and mechanical properties of mixed rubber got a better value.

Effects of Rotor Speed on Manufacturing Process of Short Fiber-Rubber Composite Material

2011 ◽  
Vol 221 ◽  
pp. 350-355 ◽  
Author(s):  
De Wei Zhang ◽  
Chuan Sheng Wang ◽  
Guang Yi Lin
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Composite Material ◽  
Manufacturing Process ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Mixing Process ◽  
Rotor Speed ◽  
Rubber Composite

Rotor Speed is an important factor which impacts the mixing process and quality of mixed rubber greatly. The effects of different rotor speeds on manufacturing process of short fiber-rubber composite material have been studied by experimental study. In the experiments, the rotor speeds were 50rpm, 60rpm, 70rpm and 80rpm respectively. The experimental results indicated that the mixed rubber after vulcanized had better physical and mechanical properties as the rotor speed was 70rpm. So the rotor speed that is 70rpm has been chosen for manufacturing short fiber-rubber composite material.

Experimental Study of Screw Speed Effects on Quality of Short Fiber-Rubber Composite Material

2011 ◽  
Vol 221 ◽  
pp. 369-372 ◽  
Author(s):  
Chuan Sheng Wang ◽  
De Wei Zhang ◽  
Hui Guang Bian ◽  
Xiao Bo Wang ◽  
Lei Guo
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Composite Material ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Experimental Results ◽  
Short Fibers ◽  
Screw Speed ◽  
Rubber Composite

During the extruding process of short fiber-rubber composite material, screw speed is an important factor which influences the orientation of short fibers, as well as the physical and mechanical properties of short fiber-rubber composite material. The effects of different screw speeds on physical and mechanical properties of short fiber-rubber composite material have been studied by experimental study. In the experiments, the screw speeds were 10rpm, 15rpm, 20rpm, 25rpm and 30rpm respectively. The experimental results indicated that when the screw speed was 15rpm, the physical and mechanical properties of short fiber-rubber composite material are better.

Experimental Study on Epoxy Asphalt Binder

2010 ◽  
Vol 168-170 ◽  
pp. 916-919
Author(s):  
Ke Fei Liu
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Asphalt Binder ◽  
Physical And Mechanical Properties ◽  
Technical Requirement ◽  
Basic Requirement ◽  
Application Process ◽  
Epoxy Asphalt ◽  
Steel Deck ◽  
Thermosetting Epoxy

Epoxy asphalt has fundamentally changed the thermoplastic of asphalt and endowed the asphalt with excellent physical and mechanical properties. This paper analyses the developing technical requirement of thermosetting epoxy asphalt and points out its main problems during preparation and application process. Aiming at the steel deck paving characteristics, the author has independently developed epoxy asphalt binder and tested its performances, the results have showed that this binder can meet the basic requirement of various pavings, and its further research are in process.

An experimental study on the physical and mechanical properties of B 4 C/PI/AA6061 hybrid composites with various concentrations

2019 ◽  
Vol 40 (8) ◽  
pp. 3140-3148
Author(s):  
Xuelong Fu ◽  
Zhengbo Ji ◽  
Wei Lin ◽  
Wei Liu ◽  
Yuebin Lin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Hybrid Composites ◽  
Physical And Mechanical Properties

Experimental Study on the Engineering Characteristics of Improved Soil

2010 ◽  
Vol 168-170 ◽  
pp. 1426-1431
Author(s):  
Zhi Qing Li ◽  
Zhen Dong Cui ◽  
Yan Ping Wang ◽  
Li Chao Wang ◽  
Duo Zhong
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Fly Ash ◽  
Physical And Mechanical Properties ◽  
Hybrid Structure ◽  
Strength Characteristics ◽  
Shanxi Province ◽  
Hydration Reaction ◽  
Test Results ◽  
Shearing Strength

According to the typical loess in Shuozhou in Shanxi province, tests involved in compaction characteristics, shearing strength characteristics and disintegration are carried out by using loess and three kinds of improved loess, namely lime and fly-ash, lime and cement, cement and fly-ash. The best improved soil method is selected. The test results indicate that the compact hybrid structure is formed by fly ash and loess. The activity of fly ash is activated as a result of the lime mixing. A series of hydration reaction prompt the intensity of modified loess. And the physical and mechanical properties of improved loess are improved noticeably.

The Influence on the Physical and Mechanical Properties of the Tread by Preheating of Raw Rubber

2012 ◽  
Vol 501 ◽  
pp. 114-116
Author(s):  
Chuang Sheng Wang ◽  
Feng Bao Bai
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Water Temperature ◽  
Fill Factor ◽  
Cooling Water ◽  
Physical And Mechanical Properties ◽  
Rotor Speed ◽  
Cooling Water Temperature

This paper using synchronous rotor mixer, had researched the influence of preheating of raw rubber on the physical and mechanical properties of the tread under the same fill factor, rotor speed, cooling water temperature, and the pressure on top of bolt. According to processing and analysis of the experimental data, we can conclude that: As the temperature of raw rubber increased, the physical and mechanical properties of the tread had changed.

Sintering Effect on Mechanical Properties of Composites of Hydroxyapatite Lanthanum Oxide (HA-La2O3)

2006 ◽  
Vol 309-311 ◽  
pp. 101-104 ◽  
Author(s):  
Faik N. Oktar ◽  
L.S. Ozyegin ◽  
Onur Meydanoglu ◽  
H. Aydin ◽  
Simeon Agathopoulos ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Temperature Increase ◽  
Lanthanum Oxide ◽  
Sintering Temperature ◽  
Experimental Results ◽  
Microstructure Analysis ◽  
Bovine Bone ◽  
Properties Of Composites ◽  
Sintering Effect

Composites of calcinated bovine bone derived hydroxyapatite (HA) with 0.25, 0.5, 1, and 2 wt % La2O3 were prepared by sintering. The experimental results indicated that compression strength and microhardness of HA-La2O3 composites increase when the content of La2O3 and sintering temperature increase. The best mechanical properties were achieved after sintering at 1300°C. The results are in agreement with densification measurements and microstructure analysis.

Sign in / Sign up

Export Citation Format

Share Document