Study on Nonlinear Finite Element Analysis Method of Multi-Ribbed Composite Slab Structure Containing Steel Fibers

2011 ◽  
Vol 250-253 ◽  
pp. 3975-3982 ◽  
Author(s):  
Ji Sheng Qiu
Keyword(s):  
Finite Element ◽  
Fiber Volume Fraction ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Plastic Hinge ◽  
Analysis Method ◽  
Fiber Volume ◽  
Element Analysis ◽  
Fiber Concrete ◽  
Steel Fiber Concrete

Steel fiber concrete multi-ribbed composite slab system includes material composite and structure type composite, which has good mechanical and thermal insulation properties. This paper presents an assessment of the structure investigated using three-dimensional nonlinear finite elemental analysis. The analysis firstly has focused on solving the constitutive relation of the materials and the effect of steel fiber to determine the finite element simulation. Moreover nonlinear finite element analysis for the mechanical properties of the whole process on the composite structure system has been presented in this paper, and by changing the fiber volume fractionvf(0%, 1%, 2% and 3%) the parameter has been discussed. The analysis results show that stress distributions of the structure are close for different concrete strength and steel fiber volume fraction before formation of the plastic hinge lines of the upper edges. When the structure began to crack and the plastic hinge lines of upper edge gradually formed, due to the influence of the redistribution of internal forces, the steel fiber volume fraction has significant impact for the mechanic behavior of the structure. In addition, the steel fiber volume fraction on the developing and distribution of the cracks has little effect. This analysis method and results for the steel fiber concrete multi-ribbed composite structure can provide some valuable references for the structure research and application.

Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites

2007 ◽  
Vol 546-549 ◽  
pp. 1555-1558
Author(s):  
Chun Jun Liu ◽  
Yue Zhang ◽  
Da Hai Zhang ◽  
Zhong Ping Li
Keyword(s):  
Finite Element ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Interfacial Debonding ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Element Analysis

In this paper the composite fracture process has been simulated via the finite element method. A micromechanics model was developed to predict the stress-strain response of a SiO2f/ SiO2 composite explicitly accounting for the local damage mechanisms such as fiber fracture and interfacial debonding. The effects of interfacial strength and fiber volume fraction on the toughness of fiber-reinforced ceramic matrix composites were investigated. The results showed that the composite failure behaviors correlated with the interface strength, which could achieve an optimum value for the elevation of the composite toughness. The increase of fiber volume fraction can make more toughening contributions.

Effect of Nanocomposite Microstructure on Stochastic Elastic Properties: An Finite Element Analysis Study

2019 ◽  
Vol 5 (3) ◽  
Author(s):  
Seyed Hamid Reza Sanei ◽  
Randall Doles ◽  
Tyler Ekaitis
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Elastic Properties ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Microstructural Feature ◽  
Stochastic Response ◽  
Fiber Volume ◽  
Element Analysis ◽  
Analysis Study

This paper addresses the effect of microstructure uncertainties on elastic properties of nanocomposites using finite element analysis (FEA) simulations. Computer-simulated microstructures were generated to reflect the variability observed in nanocomposite microstructures. The effect of waviness, agglomeration, and orientation of carbon nanotubes (CNTs) were investigated. Generated microstructures were converted to image-based 2D FEA models. Two hundred different realizations of microstructures were generated for each microstructure type to capture the stochastic response. The results confirm previously reported findings and experimental results. The results show that for a given fiber volume fraction, CNTs orientation, waviness, and agglomeration result in different elastic properties. It was shown that while a given microstructural feature will improve the elastic property, it will increase the variability in the elastic properties.

Finite Element Analysis on Orthotropic Deck with Composite Pavement Layer

2013 ◽  
Vol 275-277 ◽  
pp. 1163-1166
Author(s):  
De Rong Zhu ◽  
Zi Jiang Yang ◽  
Hui Zhang ◽  
Shi Zhong Liu ◽  
Gui Xia Ning
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Steel Fiber ◽  
Mechanical Performance ◽  
Element Analysis ◽  
Box Girder ◽  
Concrete Layer ◽  
Fiber Concrete ◽  
Steel Fiber Concrete

Orthotropic steel deck; Shear nail; Steel fiber concrete pavement layer; Stress analysis. Abstract. Aiming at the optimization design of composite pavement on orthotropic deck in a streamlined steel box girder with lager wide-to-span ratio, finite element analysis is taken under various loads supplemented with static model; the stress distribution is analyzed in each part of the pavement layer. The theoretical results show that the deck of the bridge displays obviously orthotropic features; shear nails with reasonable density can increase the binding capability of each part of deck pavement and overall mechanical performance. It can be concluded that the service life of the deck pavement can be extended by the use of steel fiber concrete layer.

The Effects of Layer-by-Layer Thickness and Fiber Volume Fraction Variation on the Mechanical Performance of a Pressure Vessel

2018 ◽  
Author(s):  
Emre Özaslan ◽  
Ali Yetgin ◽  
Volkan Coşkun ◽  
Bülent Acar ◽  
Tarık Olğar
Keyword(s):  
Finite Element ◽  
Layer Thickness ◽  
Pressure Vessel ◽  
Fiber Volume Fraction ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Layer By Layer ◽  
Fiber Volume ◽  
Filament Wound

Due to high stiffness/weight ratio, composite materials are widely used in aerospace applications such as motor case of rockets which can be regarded as a pressure vessel. The most commonly used method to manufacture the pressure vessels is the wet filament winding. However, the mechanical performance of a filament wound pressure vessel directly depends on the manufacturing process, manufacturing site environmental condition and material properties of matrix and fiber. The designed ideal pressure vessel may not be manufactured because of the mentioned issues. Therefore, manufacturing of filament wound composite structures are based on manufacturing experience and experiment. In this study, the effect of layer-by-layer thickness and fiber volume fraction variation due to manufacturing process on the mechanical performance was investigated for filament wound pressure vessel with unequal dome openings. First, the finite element model was created for designed thickness dimensions and constant material properties for all layers. Then, the model was updated. The updated finite element model considered the layer-by-layer thickness and fiber volume fraction variation. Effects of the thickness and fiber volume fraction on the stress distribution along the motor axial direction were shown. Also hydrostatic pressurization test was performed to verify finite element analysis in terms of fiber direction strain through the motor case outer surface. Important aspects of analyzing a filament wound pressure vessel were addressed for designers.

The Effects of Layer-by-Layer Thickness and Fiber Volume Fraction Variation on the Mechanical Performance of a Pressure Vessel

2020 ◽  
Vol 142 (4) ◽  
Author(s):  
Emre Özaslan ◽  
Ali Yetgin ◽  
Bülent Acar ◽  
Volkan Coşkun ◽  
Tarık Olğar
Keyword(s):  
Finite Element ◽  
Pressure Vessel ◽  
Material Properties ◽  
Fiber Volume Fraction ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Layer By Layer ◽  
Fiber Volume ◽  
Filament Wound

Abstract Due to high stiffness/weight ratio, composite materials are widely used in aerospace applications such as motor case of rockets which can be regarded as a pressure vessel. The most commonly used method to manufacture pressure vessels is the wet filament winding. However, the mechanical performance of a filament wound pressure vessel directly depends on the manufacturing process, manufacturing site environmental condition, and material properties of matrix and fiber. The designed pressure vessel may not be manufactured because of the mentioned issues. Therefore, manufacturing of filament wound composite structures are based on manufacturing experience and experiment. In this study, effects of layer-by-layer thickness and fiber volume fraction variation due to manufacturing process on the mechanical performance were investigated for filament wound pressure vessel with unequal dome openings. First, the finite element model was created for designed thickness dimensions and constant material properties for all layers. Then, the model was updated. The updated finite element model considered the thickness of each layer separately and variation of fiber volume fraction between the layers. Effects of the thickness and fiber volume fraction on the stress distribution along the motor axial direction were shown. Also hydrostatic pressurization tests were performed to verify finite element analysis in terms of fiber direction strain through the motor case outer surface. Important aspects of analyzing a filament wound pressure vessel were addressed for designers.

J Integral of Steel Fiber Reinforced High Strength Concrete

2012 ◽  
Vol 476-478 ◽  
pp. 1568-1571
Author(s):  
Ting Yi Zhang ◽  
Guang He Zheng ◽  
Ping Wang ◽  
Kai Zhang ◽  
Huai Sen Cai
Keyword(s):  
High Strength Concrete ◽  
Fiber Volume Fraction ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Bending Test ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Three Point Bending ◽  
Strength Concrete

Through the three-point bending test on the specimens of steel fiber reinforced high strength concrete (SFHSC), the effects of influencing factors including water-cement ratio (W/C) and the fiber volume fraction (ρf) upon the critical value(JC) of J integral were studied. The results show that the variation tendencies of JC are different under different factors. JC meets the linear statistical relation with W/C, ρf, respectively.

Sign in / Sign up

Export Citation Format

Share Document