scholarly journals Thermal Investigation of Aluminium – 11.8% Silicon (LM6) Reinforced SiO2-Particles

2011 ◽  
Vol 264-265 ◽  
pp. 620-625 ◽  
Author(s):  
Mohd Sayuti ◽  
S. Suraya ◽  
Shamsuddin Sulaiman ◽  
T.R. Vijayaram ◽  
Mohd Khairol A. Arifin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Metal Matrix ◽  
High Performance ◽  
Low Cost ◽  
Hardness Test ◽  
Weight Fraction ◽  
Matrix Composites ◽  
Casting Technique ◽  
And Performance ◽  
Commercial Applications

High performance automotive, aerospace, electronics and other industrial and commercial applications are finding tremendous advantages in using metal matrix composites. The reinforcement is very important because it determines the mechanical properties, cost and performance of a given composite. An excellent in mechanical properties, combined with the ease of formability and low cost makes the application of metal matrix composite of aluminium-11.8% silicon reinforced SiO2 to increase steadily. This paper investigates the interrelationships between thermal properties and reinforcement content, microstructure and hardness of LM6 reinforced SiO2 composites. Specimens were fabricated by casting technique for 5, 10, 15 and 20% weight fractions of SiO2 particulate and mesh of: 65 micron. The experimental results show that the thermal diffusivity and thermal conductivity decreases as SiO2 wt.% of the composite increases and under hardness test, it was found that the hardness value had increased gradually with the increased addition of quartz particulate by weight fraction percentage.

An Investigation of Mechanical Properties on Aluminium 6061 Reinforced with Silicon Carbide - Metal Matrix Composites

2015 ◽  
Vol 787 ◽  
pp. 568-572 ◽  
Author(s):  
A. Radha ◽  
K.R. Vijayakumar
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Metal Matrix ◽  
Charpy Impact ◽  
Vortex Method ◽  
Weight Fraction ◽  
Stir Casting ◽  
Matrix Composites ◽  
Casting Technique ◽  
High Fatigue

Composite materials like Aluminium metal matrix composite is playing a very important role in manufacturing industries e.g. automobile and aerospace industries, due to their superior properties such as light weight, low density, high specific modulus, high fatigue strength etc., In this study Aluminium(Al 6061) is reinforced with Silicon Carbide particles and fabricated by Stir Casting Technique (vortex method). The MMC rectangular bars (samples) are prepared with Al6061 and SiC (28 µ size) as the reinforced particles by weight fraction from 0%, 5%, 10%, and 15% of SiC. The microstructure analysis and Mechanical properties like Tensile Strength, Vickers Hardness and Charpy Impact Strength were investigated on prepared specimens. It is observed that the properties are increased with increasing of reinforced specimens by weight fraction.

Microstructure and Mechanical Behavior of Nanoparticles Reinforced Metal Matrix Composites – A Review

2014 ◽  
Vol 592-594 ◽  
pp. 939-944 ◽  
Author(s):  
S. Santhosh Kumar ◽  
Somashekhar S. Hiremath
Keyword(s):  
Mechanical Properties ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
High Performance ◽  
Physical And Mechanical Properties ◽  
Stir Casting ◽  
Matrix Composites ◽  
Casting Technique ◽  
Effect Of Particle Size ◽  
Properties Of Composites

Micro sized particles such as SiC, Al2O3and diamond particles reinforced with metal matrix composites are most commonly used in high performance applications like military, automotive and aerospace industries. Nowadays nano sized particles are replacing the micro sized particles because of their improved physical and mechanical properties. This paper reviews the stir processing method, mechanical properties, effect of particle size on properties of composites and structure of the metal matrix composites reinforced with nanoparticles. Among the variety of liquid metallurgy techniques processes available for preparing metal matrix composites, stir casting technique is generally accepted route and currently practised commercially because of its simplicity flexibility and Uniform distribution.

scholarly journals Properties of AlSi9Cu3 metal matrix micro and nano composites produced via stir casting

2018 ◽  
Vol 16 (1) ◽  
pp. 726-731 ◽  
Author(s):  
Tennur Gülşen Ünal ◽  
Ege Anıl Diler
Keyword(s):  
Mechanical Properties ◽  
Metal Matrix ◽  
Weight Fraction ◽  
Stir Casting ◽  
Mechanical Tests ◽  
Matrix Composites ◽  
Casting Method ◽  
Porosity Formation ◽  
Three Point Bending ◽  
Hardness Values

AbstractThe effects of micro and nano sized reinforcement particles on microstructure and mechanical properties of aluminium alloy-based metal matrix composites were investigated in this study. AlSi9Cu3 alloy was reinforced with micro and nano sized ceramic reinforcement particles at different weight fractions by using a stir casting method. The mechanical tests (hardness, three point bending) were performed to determine the mechanical properties of AlSi9Cu3 alloy-based microcomposites (AMMCs) and nanocomposites (AMMNCs). The experimental results have shown that the size and weight fraction of reinforcement particles have a strong influence on the microstructure and the mechanical properties of AlSi9Cu3 alloy-based microcomposites and nanocomposites. The relative densities of all AMMC and AMMNC samples are lower than unreinforced AlSi9Cu3 alloy due to porosity formation with the increase of weight fraction of reinforcement particles. As weight fraction increases, hardness values of AMMCs and AMMNCs increase. Maximum flexural strength can be obtained at 3.5wt.% for the AMMC sample with microsized Al2O3 particles and at 2wt.% for the AMMNC sample with nano-sized Al2O3 particles. After the weight fractions exceed these values, flexural strengths of both AMMCs and AMMNCs decrease due to clustering of Al2O3 particles.

Characterization and mechanical response of novel Al-(Mg–TiFe–SiC) metal matrix composites developed by stir casting technique

2019 ◽  
Vol 53 (28-30) ◽  
pp. 3929-3938 ◽  
Author(s):  
Samuel O Akinwamide ◽  
Serge M Lemika ◽  
Babatunde A Obadele ◽  
Ojo J Akinribide ◽  
Bolanle T Abe ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Metal Matrix ◽  
Mechanical Response ◽  
Frictional Coefficient ◽  
Stir Casting ◽  
Matrix Composites ◽  
Tribological Behaviour ◽  
Casting Technique ◽  
Electron Microscopes

This study was conducted to investigate the synthesis, characterization and mechanical properties of aluminium reinforced with ferrotitanium and silicon carbide via stir casting technique. Microstructures of as-cast samples were analysed using optical and scanning electron microscopes equipped with energy-dispersive X-ray spectroscopy. The mechanical properties in terms of hardness, tensile, tribological behaviour and fracture were assessed. Results showed that the homogeneous dispersion of reinforcement was within the metal matrix composite. Tribological study revealed a decrease in frictional coefficient of the composites with lowest frictional coefficient observed in composite with addition of silicon carbide as reinforcement. Morphology of fractured surface displayed a reduction in the size of dimples formed in reinforced aluminium composites when compared with larger dimple sizes observed in as-cast aluminium alloy.

Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with SiC and Al2O3 Hybrid Metal Matrix Composites

2015 ◽  
Vol 766-767 ◽  
pp. 246-251 ◽  
Author(s):  
P. Pugalethi ◽  
M. Jayaraman ◽  
A. Natarajan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Aluminium Alloy ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Weight Ratio ◽  
Hardness Test ◽  
Matrix Composites ◽  
Hybrid Metal Matrix Composites ◽  
Structural Applications

Aluminium based Metal Matrix Composites (MMCs) with Aluminium matrix and non-metallic reinforcements are finding extensive applications in automotive, aerospace and defence fields because of their high strength-to-weight ratio, high stiffness, hardness, wear-resistance, high-temperature resistance, etc. Composite materials are frequently chosen for structural applications because they have desirable combinations of mechanical characteristics. Development of hybrid metal matrix composites has become an important area of research interest in Material Science. In this work, the Aluminium alloy is reinforced with 3,5,7,9 wt. % of Al2O3 and 2 wt. % of SiC to prepare the hybrid composite. The present study is aimed at evaluating the physical properties of aluminium 7075 in the presence of silicon carbide, aluminium oxide and its combinations. The compositions are added up to the ultimate level and stir casting method is used for the fabrication of aluminium metal matrix composites. The mechanical behaviours of metal matrix composites like tensile strength, and hardness test are investigated by conducting laboratory experiments. Mechanical properties like micro hardness and tensile strength of Al7075 alloy increase with the addition of SiC and Al2O3 reinforcements.

scholarly journals Evaluation of Mechanical Properties of Micro-Titanium and CNT Reinforced Copper Based MMC

2021 ◽  
pp. 81-104
Author(s):  
Dr. Ranjith V ◽  
Dr. H K Shivanand2 ◽  
Dr. Tukaram Jadhav3 ◽  
Verma R4 ◽  
Puneeth P
Keyword(s):  
Mechanical Properties ◽  
Performance Studies ◽  
Metal Matrix ◽  
Stir Casting ◽  
Vital Role ◽  
New Combination ◽  
Matrix Composites ◽  
Power Sector ◽  
Casting Technique ◽  
Effective Reinforcement

Copper based composites plays a vital role in the field of marine, aerospace, automobile and power sector for making of components like electrical sliding contacts, gears, bearings, bushes, brakes and clutches etc. Even though promising reinforcements are available for the composites, always researchers search for the new combination of matrix and reinforcement for tailored properties and cost effectiveness. CNT is one of the effective reinforcement used in the metal matrix composites by various researches because of its excellent properties. The present work is focused on the preparation of copper/CNTs/Micro-Titanium composite through stir casting technique performance studies of the composite are made on the mechanical properties. The composite prepared with reinforcement such as CNTs and Micro-Titanium of 0.5, 1, 1.5 % and 1, 3 & 5wt. % were studied. The Tensile strength, Compression strength, Hardness was found out via experimentation.

Effect of squeezing on porosity and wear behaviour of partially remelted A319/20 vol% SiCp metal matrix composites

2008 ◽  
Vol 222 (3) ◽  
pp. 295-303 ◽  
Author(s):  
T S Mahmoud ◽  
F H Mahmoud ◽  
H M Zakaria ◽  
T A Khalifa
Keyword(s):  
Wear Resistance ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Wear Test ◽  
Weight Fraction ◽  
Stir Casting ◽  
Wear Behaviour ◽  
Matrix Composites ◽  
Casting Technique ◽  
Cast Composites

This article describes the effect of the squeezing process on the porosity of partially remelted A319/20 vol% SiC particulate (SiCp) reinforced metal matrix composites (MMCs). The composite alloy was originally fabricated by a stir casting technique. The effect of squeezing process parameters such as the squeezing time, compressive stress, and the liquid weight fraction inside the melt on the overall porosity was extensively studied. Moreover, pin-on-disc wear tests were conducted to evaluate the effect of porosity on the wear resistance of the composites. It was found that the squeezed composites have lower overall porosity when compared with the as-cast composites. The lowest overall porosity content was observed when the squeezing process variables were at their peak values. After squeezing, the gas-bubble voids were practically eliminated, whereas the inter-particle voids were significantly reduced but not completely eliminated due to fracture of SiCp and generation of new inter-particle microvoids. Wear test results showed that the wear resistance of the squeezed composites was significantly higher than the as-cast composites due to the lower porosity content of the squeezed composites. The wear resistance of the squeezed composites depends significantly on the overall porosity. It has been found that the wear rate of the squeezed composites increase with increasing overall porosity.

Sign in / Sign up

Export Citation Format

Share Document