Synthesis of Surface-Modified Oil-Soluble Silica Nanospheres and Investigation of their Tribological Behavior

Silica nanospheres with good dispersibility in oily solvents were prepared using a facile in-situ surface-modification route. The microstructure of resultant surface-capped silica nanospheres was analyzed with a transmission electron microscope. The tribological behavior of the silica nanospheres as additive in engine oil SE 15W/40 was evaluated using a four-ball machine; and the morphology and composition of the worn steel surfaces were analyzed using a scanning electron microscope equipped with an energy dispersive X-ray analysis attachment. It was found that organic modifier hexamethyldisilazane (HMDS) was combined with nano-SiO2 by covalent bonds, resulting in varied surface properties and improved dispersibility of the nanoparticles in many organic mediums. Besides, oil-soluble silica nanospheres as additive in the engine oil had excellent friction-reducing and antiwear abilities, showing promising application prospect.

Download Full-text

A TEM study of the microstructure of avian eggshells

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100130146 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1102-1103

Author(s):

S. Q. Xiao ◽

S. Baden ◽

A. H. Heuer

Keyword(s):

Electron Microscope ◽

Calcium Carbonate ◽

Nucleation And Growth ◽

Growth Mechanisms ◽

Shell Surface ◽

Thin Sections ◽

Polycrystalline Metals ◽

Transmission Electron ◽

Nucleation And Growth Mechanisms

The avian eggshell is one of the most rapidly mineralizing biological systems known. In situ, 5g of calcium carbonate are crystallized in less than 20 hrs to fabricate the shell. Although there have been much work about the formation of eggshells, controversy about the nucleation and growth mechanisms of the calcite crystals, and their texture in the eggshell, still remain unclear. In this report the microstructure and microchemistry of avian eggshells have been analyzed using transmission electron microscope (TEM) and energy dispersive spectroscopy (EDS).Fresh white and dry brown eggshells were broken and fixed in Karnosky's fixative (kaltitanden) for 2 hrs, then rinsed in distilled H2O. Small speckles of the eggshells were embedded in Spurr medium and thin sections were made ultramicrotome.The crystalline part of eggshells are composed of many small plate-like calcite grains, whose plate normals are approximately parallel to the shell surface. The sizes of the grains are about 0.3×0.3×1 μm3 (Fig.l). These grains are not as closely packed as man-made polycrystalline metals and ceramics, and small gaps between adjacent grains are visible indicating the absence of conventional grain boundaries.

Download Full-text

In situ TEM observations of melting in nanosized eutectic Pb-Cd inclusions embedded in Al

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100167391 ◽

1996 ◽

Vol 54 ◽

pp. 986-987

Author(s):

S. Hagège ◽

U. Dahmen ◽

E. Johnson ◽

A. Johansen ◽

V.S. Tuboltsev

Keyword(s):

Electron Microscope ◽

Melt Spinning ◽

Ternary Alloys ◽

Solid Matrix ◽

Eutectic System ◽

In Situ Tem ◽

In Situ Observation ◽

Orientation Relationships ◽

Transmission Electron

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.

Download Full-text

Remote On-Line Control of a High-Voltage in situ Transmission Electron Microscope with A Rational User Interface

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100164386 ◽

1996 ◽

Vol 54 ◽

pp. 384-385

Author(s):

M.A. O’Keefe ◽

J. Taylor ◽

D. Owen ◽

B. Crowley ◽

K.H. Westmacott ◽

...

Keyword(s):

Electron Microscopy ◽

Electron Microscope ◽

User Interface ◽

Transmission Electron Microscope ◽

High Voltage ◽

Materials Science ◽

Transmission Electron ◽

On Line ◽

Electron Microscopes

Remote on-line electron microscopy is rapidly becoming more available as improvements continue to be developed in the software and hardware of interfaces and networks. Scanning electron microscopes have been driven remotely across both wide and local area networks. Initial implementations with transmission electron microscopes have targeted unique facilities like an advanced analytical electron microscope, a biological 3-D IVEM and a HVEM capable of in situ materials science applications. As implementations of on-line transmission electron microscopy become more widespread, it is essential that suitable standards be developed and followed. Two such standards have been proposed for a high-level protocol language for on-line access, and we have proposed a rational graphical user interface. The user interface we present here is based on experience gained with a full-function materials science application providing users of the National Center for Electron Microscopy with remote on-line access to a 1.5MeV Kratos EM-1500 in situ high-voltage transmission electron microscope via existing wide area networks. We have developed and implemented, and are continuing to refine, a set of tools, protocols, and interfaces to run the Kratos EM-1500 on-line for collaborative research. Computer tools for capturing and manipulating real-time video signals are integrated into a standardized user interface that may be used for remote access to any transmission electron microscope equipped with a suitable control computer.

Download Full-text