Research on the Effects of the Basic Properties of Offset Paper and Art Paper on Printing Dot Reproduction

2011 ◽  
Vol 287-290 ◽  
pp. 3089-3092
Author(s):  
Yong Gang Yang ◽  
Fu Ping Liu
Keyword(s):  
Color Gamut ◽  
Gain Curve ◽  
Basic Properties ◽  
Dot Gain ◽  
Chromatic Coordinates

The properties of offset paper and art paper including smoothness, gloss and absorbability, dot percentage and the tri-stimulus values of every dot areas and solid areas of the printed paper samples were measured. Dot gain curve and chromatic diagram were drawn after dot gain values and chromatic coordinates (x, y) were calculated. The results showed that smaller dot gain value and greater color gamut occur on the art paper due to its higher smoothness, gloss and lower absorbability when the printing conditions were the same, so the printing dot reproduction quality on the surface of art paper is better. However because offset paper has lower smoothness and gloss, higher absorbability compared with art paper, therefore the dot reproduction quality on offset paper is not as good as art paper.

Effects of Paper Properties on Printing Dot Gain and Color Gamut

2011 ◽  
Vol 236-238 ◽  
pp. 1238-1241
Author(s):  
Yong Gang Yang ◽  
Qiao Zhuo Gao ◽  
Fu Ping Liu
Keyword(s):  
Color Gamut ◽  
Paper Properties ◽  
Gain Curve ◽  
Dot Gain ◽  
Printing Processes

The properties of art paper and offset paper were measured, including whiteness, smoothness, gloss and absorbability. And these paper samples were printed using machine proofing with the uniform printing processes. Dot percentage and the tri-stimulus values (X, Y and Z) of dot areas and solid areas were tested with the spectrophotometer X-Rite 530 on the print paper samples. At last, dot gain curve and chromatic diagram were drawn after data analyzing and processing, and then the influences of paper properties on printing dot gain and gamut of color were analyzed. The results showed less dot gain value and greater gamut of color occurred because of higher smoothness, gloss, whiteness and lower absorbability to art paper when the printing conditions were definite, so the dot reproduction quality on the surface of art papers was better. But which of the above-mentioned were opposite to offset papers.

A Study of Color Variance between Vacuum Plate of Aluminum and Aluminum Foil Using UV Offset Printing

2012 ◽  
Vol 262 ◽  
pp. 253-257
Author(s):  
Chang Lang Chen ◽  
Mei Chun Lo ◽  
Ming Chw Wei ◽  
Shi Wei Wang
Keyword(s):  
Aluminum Foil ◽  
Packaging Materials ◽  
Offset Printing ◽  
Color Gamut ◽  
Test Form ◽  
White Board ◽  
Printing Quality ◽  
Dot Gain ◽  
Green Packaging ◽  
The Difference

In packaging market, Vacuum Plate of Aluminum by UV offset printing is light impediment effectively, moisture-proof, and forgery-proof and reaches the request of the green packaging production. Thus, the packaging of Vacuum Plate of Aluminum is used widely. This study was a true experimental research. The test form employed was the printing quality control strip from international printing specification. It was used to record and analyze the color variance between Vacuum Plate of Aluminum and Aluminum Foil with white board and no white board using UV Offset Printing. The study indicated the comparison of Tone Value Increased & the difference of Color Gamut Range among these three packaging materials via C, M, Y, K four colors tone value and RGB area testing, and results reveals that the tone value on the Vacuum Plate of Aluminum with white board increased most among these three materials; the dot gain percentage of the Vacuum Plate of Aluminum is less than 15% which with the highest stability than others. All signature findings are given in Fig.1 and Fig.2. These results are entirely consistent with research hypotheses.

Study on Color Management of Digital Proofing

2012 ◽  
Vol 182-183 ◽  
pp. 352-356
Author(s):  
Hong Guang Sun ◽  
Kai Li ◽  
En Qiang Yin ◽  
Hong Ju Cheng
Keyword(s):  
Control Method ◽  
Evaluation Model ◽  
Quality Analysis ◽  
Color Management ◽  
Color Information ◽  
Color Gamut ◽  
Practical Solution ◽  
Solid Density ◽  
Dot Gain ◽  
And Control

The purpose of this experiment was to demonstrate a quality analysis and control method for color management of EPSON 7600 color printer. The parameters of proofs, including solid density, dot gain, gray balance and color gamut were measured, and were compared with the offset quality. The paper put forward a practical solution for editing and optimizing color management and the profiles of devices. At the same time, the effect in Transmission and conversion of color information in standardized color management was analyzed and the evaluation model of color management and profile was established, which included subjective and objective evaluations.

On the Essence and Tipology of International Public Goods

2005 ◽  
pp. 131-141
Author(s):  
V. Mortikov
Keyword(s):  
Economic Policy ◽  
Social Construction ◽  
Public Goods ◽  
Public Good ◽  
Global Public Goods ◽  
Club Goods ◽  
Basic Properties ◽  
International Public Goods ◽  
Regional Public Goods ◽  
Joint Products

The basic properties of international public goods are analyzed in the paper. Special attention is paid to the typology of international public goods: pure and impure, excludable and nonexcludable, club goods, regional public goods, joint products. The author argues that social construction of international public good depends on many factors, for example, government economic policy. Aggregation technologies in the supply of global public goods are examined.

The advancement of silicon-on-insulator (SOI) devices and their basic properties

2020 ◽  
Vol 23 (3) ◽  
pp. 227-252
Author(s):  
T.E. Rudenko ◽  
◽  
A.N. Nazarov ◽  
V.S. Lysenko ◽  
◽  
...  
Keyword(s):  
Silicon On Insulator ◽  
Basic Properties ◽  
Soi Devices

Basic Properties of an Ultrasonic Probe with a Through Hole for Puncture and Detection Principle of a Puncture Needle

2012 ◽  
Vol 132 (11) ◽  
pp. 420-424 ◽  
Author(s):  
Yuusuke Tanaka ◽  
Katsuhiko Tanaka ◽  
Susumu Sugiyama ◽  
Hisanori Shiomi ◽  
Yoshimasa Kurumi ◽  
...  
Keyword(s):  
Ultrasonic Probe ◽  
Basic Properties ◽  
Puncture Needle ◽  
Through Hole ◽  
Detection Principle

A testing paradigm for quantifying ICC profilers

2019 ◽  
Vol 2019 (1) ◽  
pp. 80-85
Author(s):  
Pooshpanjan Roy Biswas ◽  
Alessandro Beltrami ◽  
Joan Saez Gomez
Keyword(s):  
Digital Camera ◽  
Visual Assessment ◽  
Just Noticeable Difference ◽  
Color Management ◽  
Color Gamut ◽  
Gamut Mapping ◽  
Digital File ◽  
Mapping Process ◽  
Testing Paradigm

To reproduce colors in one system which differs from another system in terms of the color gamut, it is necessary to use a color gamut mapping process. This color gamut mapping is a method to translate a specific color from a medium (screen, digital camera, scanner, digital file, etc) into another system having a difference in gamut volume. There are different rendering intent options defined by the International Color Consortium [5] to use the different reproduction goals of the user [19]. Any rendering intent used to reproduce colors, includes profile engine decisions to do it, i.e. looking for color accuracy, vivid colors or pleasing reproduction of images. Using the same decisions on different profile engines, the final visual output can look different (more than one Just Noticeable Difference[16]) depending on the profile engine used and the color algorithms that they implement. Profile performance substantially depends on the profiler engine used to create them. Different profilers provide the user with varying levels of liberty to design a profile for their color management needs and preference. The motivation of this study is to rank the performance of various market leading profiler engines on the basis of different metrics designed specifically to report the performance of particular aspects of these profiles. The study helped us take valuable decisions regarding profile performance without any visual assessment to decide on the best profiler engine.

Physical dot gain of offset: Understanding and determination

2007 ◽  
Vol 22 (3) ◽  
pp. 388-393 ◽  
Author(s):  
Li Yang ◽  
Niclas Lundström
Keyword(s):  
Dot Gain
Sign in / Sign up

Export Citation Format

Share Document