Mechanical Property of Friction Stir Welded Retardant Magnesium Alloy Joint

2011 ◽  
Vol 295-297 ◽  
pp. 1929-1932
Author(s):  
Yi Min Tu ◽  
Ran Feng Qiu ◽  
Hong Xin Shi ◽  
Xin Zhang ◽  
Ke Ke Zhang
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Friction Stir Welding ◽  
Magnesium Alloy ◽  
Welding Speed ◽  
Rotational Speed ◽  
Maximum Strength ◽  
Welding Parameters ◽  
Tool Rotational Speed ◽  
Friction Stir

In order to obtain better understanding of the friction stir weldability of the magnesium alloy and provide some foundational information for improving mechanical properties of retardant magnesium alloy joints. A retardant magnesium alloy was weld using the method of friction stir welding. The influence of welding parameters on the strength of the joint was investigated. The maximum strength of 230 MPa was obtained from the joint welded at the tool rotational speed of 1000 r/min and welding speed of 750 mm/min.

Effects of welding speeds on the microstructural and mechanical properties of AZ91D Mg alloy by friction stir welding

2020 ◽  
Vol 11 (6) ◽  
pp. 769-782 ◽  
Author(s):  
Nagabhushan Kumar Kadigithala ◽  
Vanitha C
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Magnesium Alloy ◽  
Welding Speed ◽  
Base Material ◽  
Welding Parameters ◽  
Content Type ◽  
Friction Stir ◽  
Az91d Magnesium Alloy ◽  
Transverse Tensile

PurposeThe main purpose of the present work is to evaluate, the microstructural and mechanical properties of friction stir welded plates of AZ91D magnesium alloy with 3 mm thickness, and to determine the optimum range of welding conditions.Design/methodology/approachMicrostructure and fractographic studies were carried out using scanning electron microscopy (SEM). Vickers micro hardness test was performed to evaluate the hardness profile in the region of the weld area. The phases in the material were confirmed by X-Ray diffraction (XRD) analysis. Transverse tensile tests were conducted using universal testing machine (UTM) to examine the joint strength of the weldments at different parameters.FindingsMetallographic studies revealed that each zone shown different lineaments depending on the mechanical and thermal conditions. Significant improvement in the hardness was observed between the base material and weldments. Transverse tensile test results of weldments had shown almost similar strength that of base material regardless of welding speed. Fractographic examination indicated that the welded specimens failed due to brittle mode fracture. Through these studies it was confirmed that friction stir welding (FSW) can be used for the welding of AZ91D magnesium alloy.Research limitations/implicationsIn the present study, the welding speed varied from 25 mm/min to 75 mm/min, tilt angle varied from 1.5° to 2.5° and constant rotational speed of 500 rpm.Practical implicationsMagnesium and aluminum based alloys which are having high strength and low density, used in automotive and aerospace applications can be successfully joined using FSW technique. The fusion welding defects can be eliminated by adopting this technique.Originality/valueLimited work had been carried out on the FSW of magnesium based alloys over aluminum based alloys. Furthermore, this paper analyses the influence of welding parameters over the microstructural and mechanical properties.

Experimental Analysis on Mechanical Properties of Friction Stir Welding in Dissimilar Aluminum Alloys

2020 ◽  
pp. 64-68
Author(s):  
Anganan K ◽  
Narendran RJ ◽  
Naveen Prabhu N ◽  
Rahul Varma R ◽  
Sivasubramaniyam R
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Welding Speed ◽  
Rotational Speed ◽  
Copper Alloys ◽  
Welding Parameters ◽  
Tool Rotational Speed ◽  
Friction Stir ◽  
Dissimilar Aluminum Alloys

Friction stir welding (FSW) is an innovative solid state joining technique and has been employed in industries for joining aluminum, magnesium, zinc and copper alloys. The FSW process parameters such as tool, rotational speed, welding speed, axial force, etc play major role in deciding the weld quality. A mathematical modeling was developed based on experiments to predict the tensile strength of dissimilar FSW aluminum alloys. The maximum tensile strength of 210 MPa can be obtained at the tool rotational speed of 1100 rpm, welding speed of 35mm/min and an axial load of 7 kN is the Optimum welding parameters.

Experimental Analysis on Mechanical Properties of Friction Stir Welding in Dissimilar Aluminum Alloys

2020 ◽  
pp. 64-68
Author(s):  
K. Anganan ◽  
R.J . Narendran ◽  
N Naveen Prabhu ◽  
R Rahul Varma ◽  
R Sivasubramaniyam
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Welding Speed ◽  
Rotational Speed ◽  
Copper Alloys ◽  
Welding Parameters ◽  
Tool Rotational Speed ◽  
Friction Stir ◽  
Dissimilar Aluminum Alloys

Friction stir welding (FSW) is an innovative solid state joining technique and has been employed in industries for joining aluminum, magnesium, zinc and copper alloys. The FSW process parameters such as tool, rotational speed, welding speed, axial force, etc play major role in deciding the weld quality. A mathematical modeling was developed based on experiments to predict the tensile strength of dissimilar FSW aluminum alloys. The maximum tensile strength of 210 MPa can be obtained at the tool rotational speed of 1100 rpm, welding speed of 35mm/min and an axial load of 7 kN is the Optimum welding parameters.

Evaluation of Microstructure and Mechanical Properties for Friction Stir Welding of Aluminium HE-30 Plates

2019 ◽  
Vol 969 ◽  
pp. 720-726
Author(s):  
Ajay Kumar Revelly ◽  
B. Rajkumar ◽  
V. Swapna
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Rotational Speed ◽  
Weld Zone ◽  
Tool Geometry ◽  
Welding Parameters ◽  
Tool Rotational Speed ◽  
Friction Stir ◽  
Microstructure And Mechanical Properties ◽  
Non Destructive

The main aim of the present topic is friction stir welding (FSW) of Aluminium HE-30, which shows that improved microstructures, strong weld and with less of defects. In the other hand, an attempt was made to correlate the welding parameters and mechanical properties. In the present investigation four rotational speeds of 1000 rpm, 1200 rpm, 1400 rpm and 1600 rpm with travelling speed of 30 mm/min. and tool geometry (straight cylindrical) was chosen. It was observed that the tool rotational speed is a sensitive parameter to decide the ultimate tensile strength and yield strength of the present material. Similarly, the hardness of Al plates is improved at the weld zone. Hence, it is suggested that to consider a parameter such as welding tool rotational speed, travelling speed and materials in selecting the welding methods of sound joints, because it influences the microstructure and mechanical properties in various applications. In the present study, non-destructive tests are also confirmed the defective nature of the weld zone of Al plates.

scholarly journals Influence of tool rotational speed on the evolution of microstructure and mechanical properties of precipitation-hardened Aluminium 6061 butt joint during friction stir welding

2022 ◽  
Author(s):  
Biplab Ghosh ◽  
Hrishikesh Das ◽  
Asis Samanta ◽  
Jyotsna Dutta Majumdar ◽  
Manojit Ghosh
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Rotational Speed ◽  
Butt Joint ◽  
Tool Rotational Speed ◽  
Nugget Zone ◽  
Friction Stir ◽  
Transmission Electron ◽  
Free Region ◽  
Evolution Of Microstructure

Abstract The present investigation intends to interpret the effect of tool rotational speed on the mechanical properties and microstructural evolution in Aluminium 6061-T6 alloy during friction stir welding. A higher value of tool rotation produces more hardness at the nugget zone, which is attributed to the higher intensity of reprecipitation at higher rpm, revealed by transmission electron microscopy. The nugget zone is revealed as a nearly precipitate-free region, while the thermo-mechanically affected zone contains coarse precipitates, deformed and dynamically recovered grains with a few recrystallized grains. Significant reduction in grain size in the stirred zone is also a key finding. The observations depict the dependence of microstructure, and thus mechanical behaviour on tool rotational speed. A specific combination of process parameters has been determined from experiments, which corresponds to the maximum joint efficiency.

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

2021 ◽  
pp. 095440892110606
Author(s):  
C Ganesan ◽  
K Manonmani
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Welding Speed ◽  
Rotational Speed ◽  
Axial Load ◽  
Welding Process ◽  
Process Parameter ◽  
Nugget Zone ◽  
Friction Stir ◽  
Tool Pin

Friction stir welding is a high potential technology for joining similar and dissimilar aluminum materials, utilized extensively in aerospace and automotive industrial applications to eradicate the problems like hot cracking, porosity, element loss, etc. due to the fusion welding process. This Research addresses the joining of two dissimilar materials of AA 5754 – H32 and AA 8090T6511 – Al-Li and their mechanical properties analysis with the effects of friction stir welding process parameters like tool rotational speed, welding speed and axial load on weld nugget zone formation quality. The significant roles of different tool pin profiles are also emphasized. A mathematical modeling equation was formed by using regression analysis to optimize the process parameter and found the best tool pin profile for defect-free weld nugget zone and higher tensile and hardness properties. This research also portrays the contribution of various pin profiles and each process parameter on the ultimate tensile strength by response surface methodology. The results indicate that the defect-free weld joints are observed with 1800 r/min of rotational speed, welding speed of 15 mm min−1 and 8.5 kN of axial load with hexagonal pin profile.

Sign in / Sign up

Export Citation Format

Share Document