Zigbee-Based Data Acquisition System for Manufacturing

2011 ◽  
Vol 323 ◽  
pp. 65-69
Author(s):  
Gang Hong ◽  
Xiao Qin Pan
Keyword(s):  
Data Acquisition ◽  
Software Design ◽  
Distribution System ◽  
Data Acquisition System ◽  
Reliable Data ◽  
Low Power Consumption ◽  
Information Collection ◽  
Network Nodes ◽  
Network Information ◽  
Zigbee Protocol

Data acquisition for manufacturing, designed and implemented based on ZigBee protocol wireless network information collection. The CC2430 chip as the master controller node, introduced the system of hardware and software design process to achieve a remote data acquisition. Distribution system, convenient, economical, low power consumption terminal nodes, network nodes, and more features. The results show that the system is stable and reliable data acquisition can be achieved.

Remote Data Acquisition System Based on ARM-Linux

2014 ◽  
Vol 484-485 ◽  
pp. 963-966
Author(s):  
Ming Li Ding
Keyword(s):  
Data Acquisition ◽  
Design Process ◽  
Software Design ◽  
Web Server ◽  
Implementation Process ◽  
Data Acquisition System ◽  
Remote Access ◽  
Acquisition System ◽  
The Web ◽  
Remote Data

The design and implement of remote data acquisition system based on ARM-Linux ARM and embedded Linux was introduced in this paper. Except the introduction of its structure, the implementation process of A/D driver and the web server BOA in the software design process was also emphasized in this paper to achieve remote access A/D data change.

The Interface Design of TMS320C6713 and AD7679

2014 ◽  
Vol 800-801 ◽  
pp. 741-744
Author(s):  
Zhi Dong Wu ◽  
You Zheng Cui ◽  
Di Pan
Keyword(s):  
Data Acquisition ◽  
High Precision ◽  
Software Design ◽  
Interface Design ◽  
High Speed ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Specific Function ◽  
Interface Circuit

In order to meet the demands of the high precision and high speed, the interface design of TMS320C6713 and AD7679 is widely used in data acquisition system. In this paper, the interface design of TMS320C6713 and AD7679 is introduced, including the design of the interface circuit and the software design of the interface. The configuration of every register of McBSP is also expounded, including configuration method and specific function.

Design of a Data Collection System in Manufacturing Informationization

2012 ◽  
Vol 236-237 ◽  
pp. 283-288
Author(s):  
H.H. Jian ◽  
C.R. Xiong ◽  
G.B. Huang
Keyword(s):  
Data Collection ◽  
Data Acquisition ◽  
Software Design ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Collection System ◽  
Enterprise Information System ◽  
Hardware Platform ◽  
Enterprise Information ◽  
Data Collection System

This paper is based on the background of manufacturing enterprise information system. Under this case, this paper introduces a design of a data collection system that is transparent and controlled by the host computer. It uses a data acquisition system software design model which will help in speeding up the development of the system, reducing maintenance costs as well as improving data collect velocity. This paper describes the data acquisition system based on ARM hardware platform, its software framework and design process.

Embedded Data Acquisition System Based on LPC2290 and AD7715

2011 ◽  
Vol 383-390 ◽  
pp. 6964-6968
Author(s):  
Hui Li ◽  
Hao Zhang ◽  
Dao Gang Peng ◽  
Jia Wei Wang
Keyword(s):  
Operating System ◽  
Data Acquisition ◽  
Real Time ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Low Power Consumption ◽  
Embedded Control ◽  
Control Applications ◽  
Real Time Operating System ◽  
Arm7 Processor

This paper uses ARM7 processor LPC2290, embedded data acquisition chip AD7715 and real-time operating system μC/OS-II as a basis to design an ARM-based embedded data acquisition system. This system achieves RS-232/RS-485 communication, Ethernet communication, keyboard and LCD display embedded control applications. It has a small size hardware, low power consumption, plenty functions and highly extended features. The reliability of embedded real-time operating system μC/OS-II has been certified. It makes the system more stable, and makes maintenance and upgrade program more convenient.

Software Design Based on PLD High-Speed Data Acquisition System

2013 ◽  
Vol 798-799 ◽  
pp. 647-650
Author(s):  
Geng Zhang ◽  
Hao Xu
Keyword(s):  
Data Acquisition ◽  
Real Time ◽  
Software Design ◽  
High Speed ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Data Sampling ◽  
Logic Function ◽  
High Speed Data Acquisition ◽  
High Speed Data

Data collection in the important position of modern industrial production and scientific research is increasingly outstanding, as well as the real-time collection, real-time transmission and real-time processing of high speed data acquisition requirements are constantly improve. In addition, for different occasions, the data acquisition system of data sampling parameters are different. PLD as a universal integrated circuit, its logic function according to user's programming on the device, this paper introduces the high-speed data acquisition system based on PLD, mainly expounds the software design of the system, this paper introduces a simple PLD system, using FPGA as the data acquisition chip, the main measure the infrared remote control code acquisition, based on EDA technology to design a core, using DMA access to data, to achieve high-speed system requirements.

Neuron Chip and MCU Double Processor Research

2013 ◽  
Vol 791-793 ◽  
pp. 1824-1827
Author(s):  
Shu Ya Zhi ◽  
Xiu Jun Ling
Keyword(s):  
Data Acquisition ◽  
Design Process ◽  
Software Design ◽  
Data Acquisition System ◽  
Network Interface ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Chip Data ◽  
Physical Network ◽  
Neuron Chip

The paper discusses the neuron chip based on MC143150 and single-chip microcomputer AT89S51 double CPU structure AI node hardware and software design process. In the hardware introduced the ADC0809 modulus conversion chip data acquisition system,AT89S51 and MC143150 interface and MC143150 and physical network interface. In the software introduces the data acquisition, parallel slave-A mode of communication and utilization of network variables to send information from three aspects of the program design.

The Electric Quantity Data Acquisition System Based on Wireless Sensor Network

2012 ◽  
Vol 239-240 ◽  
pp. 879-883
Author(s):  
Jian Nong Wang ◽  
Wei Wang
Keyword(s):  
Data Acquisition ◽  
High Reliability ◽  
Electric Energy ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Network Nodes ◽  
Zigbee Network ◽  
Promising Application ◽  
Electric Quantity ◽  
Special Algorithm

This paper introduces an electric quantity data acquisition system based on WSN, and a special algorithm which is used in multi-channel electric data acquisition is also introduced. In this algorithm, a large number of hardware circuits are replaced by software functions, the design of the hardware is simplified, and it is of practical value. The system includes pulse kilowatt-hour meters, Data Acquisition(DAQ), data concentrators , Server and Zigbee network nodes (Router and Coordinator) and so on. This paper explains the structure of Zigbee network, the network features of DRF1605H Zigbee module, the special algorithm of electric quantity data acquisition, the structure of WSN electric quantity data acquisition system, the design of electric quantity data acquisition hardware and software and so on. After designing and implementing this system, the electric quantity data acquisition, the data transmission between each ZigBee node and the ability of anti-interference are tested. The results of each test show that each part of the system works properly and meets the original requirements of the design. From the running condition of the system, the system for electric quantity data acquisition and transmission has some characteristics such as a simple structure, accurate data, a strong anti-interference ability, high reliability of WSN, easy maintenance, good scalability and so on, which indicate it has a promising application future. This system helps to plan the use of electricity and dispatch the power. Not only is the electric energy management automation level improved, but also manpower and material resources are saved, leading to remarkable economical benefits.

The Design of Embedded Multi-Channel Data Acquisition System

2012 ◽  
Vol 182-183 ◽  
pp. 660-664
Author(s):  
Yan Zhang Qiu ◽  
Liang Guo ◽  
Sheng Hui Liu
Keyword(s):  
Embedded System ◽  
Data Acquisition ◽  
Software Design ◽  
Flash Memory ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Serial Port ◽  
The Embedded System ◽  
Ethernet Interface ◽  
Expansion Circuit

This paper analyzes the Flash Memory interface, SDRAM interface, Ethernet interface and Serial-port expansion circuit. The Embedded Multi-channel Data Acquisition System is designed by MCF5272 microprocessor. The main control system of MCF5272 includes SDRAM, Flash and BDM interface and so on. At the software design, we main introduce the compile and develop of bootload and the compiler and debugging environment of μClinux build. On this base, the general methods and points of the embedded system hardware design were summarized.

Sign in / Sign up

Export Citation Format

Share Document