Analytical Hierarchy Process Model Applied to Port Urban Logistics Efficiency Commentary

2011 ◽  
Vol 345 ◽  
pp. 41-45 ◽  
Author(s):  
Xin Long Jiao

This paper aims to construct analysis model of port urban logistics arrangement using Delphi and analytical hierarchy process method, furthermore, establishment of fuzzy theory and analytical hierarchy process model and factor set. And calculate every index weight with the weighting method--Gl based on differential principle and appraise comprehensive efficiency using fuzzy theory and analytical hierarchy process evaluation method. Using the average weighting method make quantitative disposal with indexes of appraisal factors and educes port urban logistics comprehensive efficiency outcome. And in so doing,validating Shanghai port urban logistics competitiveness actually which respects its efficiency status.

2011 ◽  
Vol 121-126 ◽  
pp. 2769-2773 ◽  
Author(s):  
Xue Lian Liu

This paper aims to construct analysis model of port urban logistics arrangement using Delphi and analytical hierarchy process method, furthermore, establishment of fuzzy theory and analytical hierarchy process model and factor set. And calculate every index weight with the weighting method--Gl based on differential principle and appraise comprehensive efficiency using fuzzy theory and analytical hierarchy process evaluation method. Using the average weighting method make quantitative disposal with indexes of appraisal factors and educes port urban logistics comprehensive efficiency outcome. And in so doing,validating Shanghai port urban logistics competitiveness actually which respects its efficiency status.


2010 ◽  
Vol 163-167 ◽  
pp. 3009-3014 ◽  
Author(s):  
Wen Sheng Li ◽  
Yi Heng He

When the reliability analysis of in-service RC flexural member is carried on, an expert evaluation or AHP (analytical hierarchy process) for evaluation is commonly used, but human factors are big. This paper presents a comprehensive evaluation method of a existing RC flexural member’s reliability on the basis of attribute mathematics. According to the actual measured values of each index in the evaluation system, using a mathematical method to calculate weight, and build a comprehensive quantitative analysis model. Example analysis shows that this method can effectively identify and finely distinguish the reliability of in-service RC flexural members, which be much more objective and scientific compared with other previous methods.


2020 ◽  
Vol 24 (1) ◽  
pp. 100-105
Author(s):  
Herawati Herawati ◽  
Muhammad Arsyad Thaha ◽  
Chairul Paotonan

Abstrak Wilayah pesisir merupakan pertemuan antara wilayah laut dan wilayah darat, dimana daerah ini merupakan daerah interaksi antara ekosistem darat dan ekosistem laut yang sangat dinamis dan saling mempengaruhi. Tujuan penelitian ini adalah untuk menentukan material lokal yang potensial dapat digunakan sebagai bahan bangunan pelindung pantai dan memilih tipe bangunan pelindung pantai yang sesuai kondisi hidro-oseanografi di lokasi studi dengan metode Analythic Hierarchy Process. Lokasi penelitian berada di Provinsi Sulawesi Tenggara, tepatnya di Pulau Kabaena, Kecamatan Kabaena Barat Desa Sikeli kabupaten Bombana. Pulau Kabaena memiliki luas 873 km2. Secara geografis terletak antara 4°22’ 59,4” - 5°28’ 26,7” Lintang Selatan serta antara 121°27’46,7”-122°09’,4” Bujur Timur. Hasil penelitian menunjukkan perairan disepanjang tanjung perak sangat mempengaruhi hidro-oseonografi disekitar pantai desa Sikeli. Kondisi ini berpengaruh terhadap pola pergerakan arus dan tinggi gelombang datang disekitar pantai desa Sikeli. Tinggi gelombang rata-rata yang paling besar merambat dari arah barat sebesar 0.49 m dengan presentase kajadian sebesar 32.42 %, disusul arah barat laut sebesar 0.39 m (20.56 %), arah tenggara sebesar 0.31 m (8.72 %) arah barat daya sebesar 0.31 m (7.99 %), arah utara sebesar 0.20 m (6.94 %), arah timur sebesar 0.15 m (11.81 %), arah selatan sebesar 0.12 m (3.42 %), dan arah timur laut sebesar 0.11 m (8.15 %). Pengambilan keputusan untuk memilih tipe bangunan pelindung pantai dengan metode AHP (Analytical Hierarchy Process) untuk penanganan abrasi pesisir pantai desa Sikeli berbasis bahan lokal diperoleh bahwa alternatif bangunan dengan nilai keterpilihan yang tertinggi adalah detached breakwater (0,4432) disusul groin (0,2479), sea-wall (0,1700) dan revetment (0.1389). Detached breakwater berfungsi untuk menahan laju sedimen kearah laut, mengurangi ketinggian dan meredam energi gelombang dan tidak dibangun sepanjang garis pantai yang akan dilindungi sehingga kapal nelayan dapat ditambat dipesisir pantai dengan aman. Abstract The Selection Type of Coastal Protection Structures in Sikeli Village Based on Local Materials. The coastal area is a meeting point between the sea and land areas, where this area is an area of interaction between terrestrial ecosystems and marine ecosystems which are very dynamic and influence each other. The purpose of this research is to determine local materials that can be used as coastal protection materials and to select the type of coastal protection that is suitable for the hydro-oceanographic conditions in the study location using the Analythic Hierarchy Process method. The research location is in Southeast Sulawesi Province, precisely on Kabaena Island, Kabaena Barat District, Sikeli Village, Bombana Regency. Kabaena Island has an area of 873 km2. Geographically it is located between 4° 22' 59.4"- 5° 28' 26.7" South Latitude and between 121° 27' 46.7 "-122° 09' 4" Longitude East. The results showed that the waters along Tanjung Perak greatly affect the hydro-oseonography around the coast of Sikeli village. This condition affects the current movement pattern and the height of the incoming waves around the coast of Sikeli village. The largest average wave height propagating from the west is 0.49 m with a kajadian percentage of 32.42%, followed by the northwest direction of 0.39 m (20.56%), southeast direction of 0.31 m (8.72%) to the southwest of 0.31 m (7.99%), to the north of 0.20 m (6.94%), to the east of 0.15 m (11.81%), to the south of 0.12 m (3.42%), and to the northeast of 0.11 m (8.15%). The decision to choose the type of coastal protection using the AHP (Analytical Hierarchy Process) method for the coastal abrasion management model in Sikeli village based on local materials was obtained that the alternative building with the highest electability value was the detached breakwater (0.4432) followed by groins (0.2479), sea-wall (0.1700) and revetment (0.1389). The detached breakwater model which functions to restrain the sediment rate towards the sea, reduce the height and reduce wave energy and is not built along the coastline which will be protected so that fishing boats can be moored to the coast safely.


2017 ◽  
Vol 49 (004) ◽  
pp. 857-- 860
Author(s):  
Q. U. RANA ◽  
S. F. SHAH ◽  
J. G. M. SAHITO ◽  
M. S. CHANDIO

Water ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 758 ◽  
Author(s):  
Romulus Costache ◽  
Alina Barbulescu ◽  
Quoc Bao Pham

In the present study, the susceptibility to flash-floods and flooding was studied across the Izvorul Dorului River basin in Romania. In the first phase, three ensemble models were used to determine the susceptibility to flash-floods. These models were generated by a combination of three statistical bivariate methods, namely frequency ratio (FR), weights of evidence (WOE), and statistical index (SI), with fuzzy analytical hierarchy process (FAHP). The result obtained from the application of the FAHP-WOE model had the best performance highlighted by an Area Under Curve—Receiver Operating Characteristics Curve (AUC-ROC) value of 0.837 for the training sample and another of 0.79 for the validation sample. Furthermore, the results offered by FAHP-WOE were weighted on the river network level using the flow accumulation method, through which the valleys with a medium, high, and very high torrential susceptibility were identified. Based on these valleys’ locations, the susceptibility to floods was estimated. Thus, in the first stage, a buffer zone of 200 m was delimited around the identified valleys along which the floods could occur. Once the buffer zone was established, ten flood conditioning factors were used to determine the flood susceptibility through the analytical hierarchy process model. Approximately 25% of the total delimited area had a high and very high flood susceptibility.


2021 ◽  
Vol 11 (02) ◽  
pp. 26-32
Author(s):  
Hery Sunandar

The problem of work performance at the foundation has not been maximally measured, only a review of achievements based on an assessment that is considered not perspective because it is not based on accurate points from employees. Regarding solving complex problems based on employee assessments, foundation leaders need to be careful to collect more detailed, accurate, and complete data. Therefore, it is necessary to have a program that can analyze the work and achievements of employees at the foundation. So one of the ways to analyze the assessment is the Analytical Hierarchy Process.


Sign in / Sign up

Export Citation Format

Share Document