Three-Dimensional Simulation for Perikinetic Flocculation of Fine Sediment under the Ionization in Still Water

2011 ◽  
Vol 356-360 ◽  
pp. 2282-2290
Author(s):  
Lin Shuang Liu ◽  
Xin Luo ◽  
Guo Lu Yang ◽  
Ming Hui Yu

A simulation based on Brownian dynamic for perikinetic flocculation of fine sediment under the ionization is presented. The Langevin equation is used as dynamical equation for tracking each particle making up a floc. Monte Carlo method was used for simulate random variation in particle movement. An initial condition and periodic boundary condition which conformed to reality well is used for calculation. In each cell 1000 particles of 10𝝁 m, 15𝝁m, 20𝝁m, 25𝝁m, 30𝝁m in diameter were served as primary particles. Floc growth is based on the thermal force and the electrostatic force. The electrostatic force on a particle in the simulation cell is considered as a sum of the electrostatic force from other particles in the original cell. The particles are supposed to be motion with uncharged and charged state in dispersion system. A comparison of the initial flocculent time and smashing time in sludge density 1010kg/m3, 1025 kg/m3, 1050 kg/m3, 1075 kg/m3, 1100 kg/m3were present to show the effect of it on floc growth. The increase of sludge density deferred the flocculation rate. To study morphological shape of floc, the radius of gyration was revealed under different situations. On one hand the radius of gyration presented random variation with uncharged particle, On the other hand, the radius of gyration increases gradually with the increase of polar electrical charges on primal particle. Moreover, the morphological shape for the charged floc was more open than that of unchanged state. Finally, a series of experimental results are present, which is coincide with model well.

2012 ◽  
Vol 2012 ◽  
pp. 1-17
Author(s):  
Linshuang Liu ◽  
Guolu Yang ◽  
Minghui Yu

To investigate sludge drying process, a numerical simulation based on Brownian dynamic for the floc with uncharged and charged particles was conducted. The Langevin equation is used as dynamical equation for tracking each particle in a floc. An initial condition and periodic boundary condition which well conformed to reality is used for calculating the floc growth process. Each cell consists of 1000 primary particles with diameter 0.1 ∼ 4 μm. Floc growth is related to the thermal force and the electrostatic force. The electrostatic force on a particle in the simulation cell is considered as the sum of electrostatic forces from other particles in the original cell and its replicate cells. It is assumed that flocs are charged with precharged primary particles in dispersion system by ionization. By the analysis of the simulation figures, on one hand, the effects of initial particle size and sludge density on floc smashing time, floc radius of gyration, and fractal dimension were discussed. On the other hand, the effects of ionization on floc smashing time and floc structure were presented. This study has important practical value in the high-turbidity water treatment, especially for sludge drying.


2021 ◽  
Vol 71 (1) ◽  
pp. 27-40
Author(s):  
Doroshenko Yaroslav ◽  
Kogut Galyna ◽  
Doroshenko Yuliia ◽  
Tarayevs’kyy Oleh ◽  
Pyrig Taras

Abstract The purpose of this work is to ensuring the strength of main gas pipelines bends by studying the peculiarities of single-phase and multiphase flows movement through the internal cavity, the processes of erosion wear and the wall stress state. The problem of synergistic influence of gas-dynamic processes (uneven pressure distribution in the internal cavity), temperature difference and erosion wear on the stress state of the bends of main gas pipelines was solved by numerical simulation. Based on the results of simulation the processes of bends erosion wear, an algorithm for three-dimensional simulation of bend walls erosion defects was developed. The complex three-dimensional geometric shape of the erosion defects of the bend wall varied according to the rate of erosion wear process. This algorithm made it possible to determine the regularities for the influence of the bend erosion defects magnitude on bends stress state. It was established that considering the maximum depth of bend erosion defects 9.6 mm, 10.5 mm and 11.9 mm, the equivalent stresses in the deepest places of the erosion defect were greater than on the concave side of the bend and in straight sections of the pipeline.


2013 ◽  
Vol 722 ◽  
pp. 441-446
Author(s):  
Guo Li Pang ◽  
Dan Qi Chen ◽  
Meng Huang

GIS geographic information system algorithm are able to be used in the disaster initialization period, middle and rescue stage for the advanced two-dimensional simulation technology with its geographical model as well as providing us with accurate and quick geographical indicators, with the estimation of building distribution and mountain damaged condition, can bring us extremely high value in use. But the traditional GIS algorithm also has tremendous convenience, namely we can't form accurate analysis of the buildings and streets form three dimensional regions, we cannot tell the difference between topographic change quantities as well, resulting in certain circumstances that the algorithm is no practical. This article puts forward 3d and 2d embedded GIS algorithm according to the satellite remote sensing technology, which can be used to cope with buildings and streets for disaster situation simulation and analysis, through this algorithm we are able to obtain the original data before a disaster, disaster failure scene and the distribution of post-disaster construction. With verification, this algorithm has high practical value and can shorten the fitting time of data.


2021 ◽  
Vol 22 (3) ◽  
pp. 551-560
Author(s):  
Ya.V. Doroshenko ◽  
G.М. Kogut ◽  
I.V. Rybitskyi ◽  
O.S. Tarayevs'kyy ◽  
T.Yu. Pyrig

The purpose of this work is to ensuring the strength of main gas pipelines bends by studying the peculiarities of single-phase and multiphase flows movement through the internal cavity, the processes of erosion wear and the wall stress state. The problem of synergistic influence of gas-dynamic processes (uneven pressure distribution in the internal cavity), temperature difference and erosion wear on the stress state of the bends of main gas pipelines was solved by numerical simulation. Based on the results of simulation the processes of bends erosion wear, an algorithm for three-dimensional simulation of bend walls erosion defects was developed. The complex three-dimensional geometric shape of the erosion defects of the bend wall varied according to the rate of erosion wear process. This algorithm made it possible to determine the regularities for the influence of the bend erosion defects magnitude on bends stress state. It was established that considering the maximum depth of bend erosion defects 9.6 mm, 10.5 mm and 11.9 mm, the equivalent stresses in the deepest places of the erosion defect were greater than on the concave side of the bend and in straight sections of the pipeline.


2008 ◽  
Vol 128 (2) ◽  
pp. 459-466 ◽  
Author(s):  
Yoshitaka Inui ◽  
Tadashi Tanaka ◽  
Tomoyoshi Kanno

Sign in / Sign up

Export Citation Format

Share Document