Periodic and Chaotic Motions of a Simply Supported FGM Plate with Two Degrees-of-Freedom

2008 ◽  
Vol 47-50 ◽  
pp. 1137-1140
Author(s):  
Yu Xin Hao ◽  
Wei Zhang ◽  
Jie Yang ◽  
Li Hua Chen

In this paper, we use the asymptotic perturbation method to investigate the nonlinear oscillation and chaotic dynamic behavior of a simply supported rectangular plate made of functionally graded materials (FGMs). We assume that the plate is made from a mixture of ceramics and metals with continuously varying compositional profile such that the top surface of the plate is ceramic rich, whereas the bottom surface is metal rich. The equations motion of the FGM plate with two-degree-of-freedom under combined parametrical and external excitations are obtained by using Galerkin’s method. Based on the averaged equation obtained by the asymptotic perturbation method, the phase portrait and waveform are used to analyze the periodic and chaotic motions. It is found that the FGM plate exhibits chaotic motions under certain circumstances.

Author(s):  
Ruiqin Wu ◽  
Wei Zhang ◽  
Ming Hui Yao

In this paper, we use the asymptotic perturbation method to analyze the nonlinear dynamics of a rotor-active magnetic bearing (AMB) system with 16-pole legs. The motion governing equation is derived by using classical Newton law. The resulting dimensionless equation of motion for the system is expressed as a two-degree-of-freedom system including the parametric excitation, quadratic and cubic nonlinearities. The asymptotic perturbation method is used to obtain the averaged equation when the primary resonance and 1/2 sub-harmonic resonance are taken into consideration. From the averaged equations obtained, numerical simulations are presented to investigate the modulation of vibration amplitudes of the rotor-AMB system. Based on a specific set of parameters, it is found that there exist the periodic, quasi-periodic and chaotic motions in the modulated amplitude of the rotor in the system.


Author(s):  
Wei Zhang ◽  
Ming-Hui Yao ◽  
Dong-Xing Cao

Multi-pulse chaotic dynamics of a simply supported functionally graded materials (FGMs) rectangular plate is investigated in this paper. The FGMs rectangular plate is subjected to the transversal and in-plane excitations. The properties of material are graded in the direction of thickness. Based on Reddy’s third-order shear deformation plate theory, the nonlinear governing equations of motion for the FGMs plate are derived by using the Hamilton’s principle. The four-dimensional averaged equation under the case of 1:2 internal resonance, primary parametric resonance and 1/2-subharmonic resonance is obtained by directly using the asymptotic perturbation method and Galerkin approach to the partial differential governing equation of motion for the FGMs rectangular plate. The system is transformed to the averaged equation. From the averaged equation, the theory of normal form is used to find the explicit formulas of normal form. Based on normal form obtained, the energy phase method is utilized to analyze the multi-pulse global bifurcations and chaotic dynamics for the FGMs rectangular plate. The analysis of global dynamics indicates that there exist the multi-pulse jumping orbits in the perturbed phase space of the averaged equation. From the averaged equations obtained, the chaotic motions and the Shilnikov type multi-pulse orbits of the FGMs rectangular plate are found by using numerical simulation. The results obtained above mean the existence of the chaos for the Smale horseshoe sense for the simply supported FGMs rectangular plate.


2013 ◽  
Vol 300-301 ◽  
pp. 988-991 ◽  
Author(s):  
Wei Qin Yu

Using the analytical and numerical approaches, the nonlinear dynamic behaviors in the vicinity of a compound critical point are studied for a simply supported functionally graded materials (FGMs) rectangular plate. Normal form theory, bifurcation and stability theory are used to find closed form solutions for equilibria and periodic motions. Stability conditions of these solutions are obtained explicitly and critical boundaries are also derived. Finally, numerical results are presented to confirm the analytical predictions


2016 ◽  
Vol 9 (1) ◽  
pp. 144-156 ◽  
Author(s):  
Majid Ghadiri ◽  
Mohsen Safi

AbstractIn this paper, He's homotopy perturbation method is utilized to obtain the analytical solution for the nonlinear natural frequency of functionally graded nanobeam. The functionally graded nanobeam is modeled using the Eringen's nonlocal elasticity theory based on Euler-Bernoulli beam theory with von Karman nonlinearity relation. The boundary conditions of problem are considered with both sides simply supported and simply supported-clamped. The Galerkin's method is utilized to decrease the nonlinear partial differential equation to a nonlinear second-order ordinary differential equation. Based on numerical results, homotopy perturbation method convergence is illustrated. According to obtained results, it is seen that the second term of the homotopy perturbation method gives extremely precise solution.


Author(s):  
С. И. Жаворонок ◽  

A brief review of the modern state-of-the art and tendencies of further development of various methods of solution of wave dispersion problems in heterogeneous functionally graded elastic waveguides is presented. Main types of functionally graded materials and structures, including gradient thon-walled structures, and their main engineering applications is discussed. The main difficulties of modelling of the stress-strain state of functionally graded shells and plates are pointed, as well as the possible ways to overcome such difficulties. The main theoretical bases of definition of effective constitutive constants of functionally graded materials and their possible estimates used in the practice are considered. Main dependencies of the effective constitutive constants of a functionally graded material on coordinates used for the mathematical modelling of the dynamics are also shown. The statement of the dynamics problem for a functionally graded waveguide and the appropriate statement of the normal wave dispersion problem are pointed. The presented Part I of the review consider some analytical methods of solution of dispersion problems, mainly the matrix ones based on the formulation of the steady dynamics problem in the image space as a first-order ordinary differential equations system. The state vectors corresponding to the useful Cauchy and Stroh formalisms are introduced, and the appropriate governing equations and the boundary conditions on waveguide’s faces are presented. Classical methods for solving the steady dynamics problem for a laminated waveguide are briefly described, which could be a basis for the further approximation of a functionally graded material by a system of layers with constant properties, i.e. the transfer matrix method, its main modifications developed to ensure the stability of calculations, and the global matrix method. Then, the intensively developed last 15 years reverberation matrix method, stiffness matrix method, and the Peano series method are discussed. Some key solutions of the wave dispersion problems for heterogeneous layers are presented; such solutions improve the efficiency of approximation of a functionally graded structure by a laminated one. The implicit solution of the general problem of steady dynamics for a waveguide with arbitrary gradation law is shown. The key features of the discussed matrix methods are pointed briefly as well as their main drawbacks. In the Part II, the main attention will be paid to methods of semi-analytical solution of dispersion problems based on the approximation of a waveguide by an equivalent system with a finite number of degrees of freedom: power series, generalized Fourier series, semi-analytical finite elements. spectral elements, as well as methods based on various theories of plates and shells.


2020 ◽  
Vol 2020 ◽  
pp. 1-29 ◽  
Author(s):  
W. Zhang ◽  
R. Q. Wu ◽  
B. Siriguleng

The asymptotic perturbation method is used to analyze the nonlinear vibrations and chaotic dynamics of a rotor-active magnetic bearing (AMB) system with 16-pole legs and the time-varying stiffness. Based on the expressions of the electromagnetic force resultants, the influences of some parameters, such as the cross-sectional area Aα of one electromagnet and the number N of windings in each electromagnet coil, on the electromagnetic force resultants are considered for the rotor-AMB system with 16-pole legs. Based on the Newton law, the governing equation of motion for the rotor-AMB system with 16-pole legs is obtained and expressed as a two-degree-of-freedom system with the parametric excitation and the quadratic and cubic nonlinearities. According to the asymptotic perturbation method, the four-dimensional averaged equation of the rotor-AMB system is derived under the case of 1 : 1 internal resonance and 1 : 2 subharmonic resonances. Then, the frequency-response curves are employed to study the steady-state solutions of the modal amplitudes. From the analysis of the frequency responses, both the hardening-type nonlinearity and the softening-type nonlinearity are observed in the rotor-AMB system. Based on the numerical solutions of the averaged equation, the changed procedure of the nonlinear dynamic behaviors of the rotor-AMB system with the control parameter is described by the bifurcation diagram. From the numerical simulations, the periodic, quasiperiodic, and chaotic motions are observed in the rotor-active magnetic bearing (AMB) system with 16-pole legs, the time-varying stiffness, and the quadratic and cubic nonlinearities.


Author(s):  
Yu-xin Hao ◽  
Wei Zhang ◽  
Jian-hua Wang

An analysis on nonlinear dynamic of a cantilevered functionally graded materials (FGM) plate which subjected to the transverse excitation in the uniform thermal environment is presented for the first time. Materials properties of the constituents are graded in the thickness direction according to a power-law distribution and assumed to be temperature dependent. In the framework of the Third-order shear deformation plate theory, the nonlinear governing equations of motion for the functionally graded materials plate are derived by using the Hamilton’s principle. For cantilever rectangular plate, the first two vibration mode shapes that satisfy the boundary conditions is given. The Galerkin’s method is utilized to discretize the governing equations of motion to a two-degree-of-freedom nonlinear system under combined thermal and external excitations. By using the numerical method, the two-degree-of-freedom nonlinear system is analyzed to find the nonlinear responses of the cantilever FGMs plate. The influences of the thermal environments on the nonlinear dynamic response of the cantilevered FGM plate are discussed in detail through a parametric study.


Author(s):  
Wei Zhang ◽  
Jun-Hua Zhang ◽  
Ming-Hui Yao

The multi-pulse Shilnikov orbits and chaotic dynamics for a parametrically excited, simply supported rectangular buckled thin plate are studied by using the extended Melnikov method. Based on von Karman type equation and the Galerkin’s approach, two-degree-of-freedom nonlinear system is obtained for the rectangular thin plate. The extended Melnikov method is directly applied to the non-autonomous governing equations of the thin plate. The results obtained here show that the multipulse chaotic motions can occur in the thin plate.


Sign in / Sign up

Export Citation Format

Share Document