A Method of Fault Detection and Diagnosis Based on Time-Frequency Analysis

2012 ◽  
Vol 490-495 ◽  
pp. 1407-1410
Author(s):  
Ying Bo Liang ◽  
Li Hong Zhang ◽  
Jin Li
Keyword(s):  
Fault Detection ◽  
Empirical Mode Decomposition ◽  
Maximum Modulus ◽  
Fault Detection And Diagnosis ◽  
Time Frequency ◽  
Multi Scale ◽  
Mode Function ◽  
Mode Decomposition ◽  
Empirical Mode Decomposition Method ◽  
Detection And Diagnosis

In the paper the authors propose a combination of the EMD (empirical mode decomposition)method and the wavelet analysis to suppress the noise and fault detection and diagnosis, It adopts empirical mode decomposition to current signal ,obtained a series of IMFs(Intrinsic Mode Function),removing the first IMF component to denosing,and then analyzed multi-scale ,using signal become mutated have the maximum modulus determine the time that the failure appeared ,the results show that this method determine the time that the failure appeared.

EMD and Envelope Spectrum Based Bearing Fault Detection

2012 ◽  
Vol 459 ◽  
pp. 233-237 ◽  
Author(s):  
Zhen Tao Li ◽  
Hui Li
Keyword(s):  
Fault Detection ◽  
Empirical Mode Decomposition ◽  
Vibration Signal ◽  
Fault Detection And Diagnosis ◽  
Mode Decomposition ◽  
Analysis Technique ◽  
Oscillation Modes ◽  
Intrinsic Oscillation ◽  
Detection And Diagnosis ◽  
Envelope Spectrum

A novel method to fault diagnosis of bearing based on empirical mode decomposition (EMD) and envelope spectrum is presented. EMD method is self-adaptive to non-stationary and non-linear signal. The methodology developed in this paper decomposes the original vibration signal in intrinsic oscillation modes, using the empirical mode decomposition. Then the envelope spectrum is applied to the selected intrinsic mode function that stands for the bearing faults. The basic principle is firstly introduced in detail. Then the EMD is applied in the research of the fault detection and diagnosis of the bearing. The experimental results show that the proposed method based on EMD and envelope spectrum analysis technique can effectively diagnose the faults of bearing.

Enhanced fault diagnosis of roller bearing elements using a combination of empirical mode decomposition and minimum entropy deconvolution

2016 ◽  
Vol 231 (4) ◽  
pp. 655-671 ◽  
Author(s):  
Z Zhang ◽  
M Entezami ◽  
E Stewart ◽  
C Roberts
Keyword(s):  
Fault Detection ◽  
Empirical Mode Decomposition ◽  
Early Stage ◽  
Roller Bearing ◽  
Fault Detection And Diagnosis ◽  
New Technique ◽  
Minimum Entropy ◽  
Processing Chain ◽  
Mode Decomposition ◽  
Detection And Diagnosis

This paper introduces a new signal processing algorithm for vibration-based fault detection and diagnosis of roller bearings. The methodology proposed in this paper is based on the combination of two data-adaptive techniques which are further enhanced through the use of an automatic feature identification mechanism. The new technique, introduced as empirical mode envelope with minimum entropy, combines elements from the empirical mode decomposition (EMD) and minimum entropy deconvolution (MED) approaches with an energy moment technique to improve the feature selection stage of the EMD algorithm. This improvement allows the processing chain to identify early stage roller bearing faults in noisier signals. The energy moment technique is used to automatically identify the most appropriate intrinsic mode function from the EMD process prior to the MED algorithm being applied. This is in contrast to conventional approaches which tend to use the first mode or make selections based on traditional energy techniques. The combination of the adaptive techniques of EMD and MED allows the development of an improved technique for fault detection and diagnosis of signals. Combining these techniques with the energy moment approach allows further improved fault detection in complex non-stationary conditions. The processing chain has been tested using data obtained during laboratory testing. From the experimental results, it is shown that the new technique is capable of the detection of early stage (minor) roller and outer race defects found in tapered-roller-bearings rotating at a variety of speeds and noise scenarios.

A NewFault Detection and Diagnosis Method Based on Wigner-Ville Spectrum Entropy for the Rolling Bearing

2012 ◽  
Vol 197 ◽  
pp. 346-350 ◽  
Author(s):  
Ping Xie ◽  
Yu Xin Yang ◽  
Guo Qian Jiang ◽  
Yi Hao Du ◽  
Xiao Li Li
Keyword(s):  
Fault Detection ◽  
Rolling Bearing ◽  
Work Conditions ◽  
Fault Detection And Diagnosis ◽  
Vibration Signals ◽  
Time Frequency ◽  
Diagnosis Method ◽  
Bearing Vibration ◽  
Detection And Diagnosis ◽  
Critical Components

The rolling bearings are one of the most critical components in rotary machinery. To prevent unexpected bearing failure, it is crucial to develop the effective fault detection and diagnosis techniques to realize equipment’s near-zero downtime and maximum productivity. In this paper, a new fault detection and diagnosis method based on Wigner-Ville spectrum entropy (WVSE) is proposed. First, the local mean decomposition (LMD) and the Wigner-Ville distribution (WVD) are combined to develop a new feature extraction approach to extract the fault features in time-frequency domain of the bearing vibration signals. Second, the concept of the Shannon entropy is integrated into the WVD to define the Wigner-Ville spectrum entropy to quantify the energy variation in time-frequency distribution under different work conditions. The research results from the bearing vibration signals demonstrate that the proposed method based on WVSE can identify different fault patterns more accurately and effectively comparing with other methods based on singular spectrum entropy (SSE) or power spectrum entropy (PSE).

Prognostication and Health Monitoring of Electronics in Implantable Biological Systems

2008 ◽  
Author(s):  
Pradeep Lall ◽  
Prashant Gupta ◽  
Manish Kulkarni ◽  
Dhananjay Panchagade ◽  
Jeff Suhling ◽  
...  
Keyword(s):  
Fault Detection ◽  
Health Monitoring ◽  
Solder Ball ◽  
Wavelet Packet ◽  
Fault Detection And Diagnosis ◽  
Electronic Systems ◽  
Energy Decomposition ◽  
Time Frequency ◽  
Auto Regressive ◽  
Detection And Diagnosis

In the present paper auto-regressive and time-frequency based techniques have been investigated to predict and monitor the damage in implantable biological electronics such as pacemakers and defibrillators. The approach focuses is on the pre-failure space and methodologies for quantification of failure in electronic equipment subjected to shock and vibration loads using the dynamic response of the electronic equipment. Presented methodologies are applicable at the system-level for identification of impending failures to trigger repair or replacement significantly prior to failure. Leading indicators of shock-damage have been developed to correlate with the damage initiation and progression in under variety of stresses in electronic systems. The approach is based on monitoring critical solder interconnects, and sensing the change in test-signal characteristics prior to failure, in addition to monitoring the transient strain characteristics optically using digital image correlation and strain gages. Previously, SPR based on wavelet packet energy decomposition and the Mahalanobis distance approach have been studied by the authors for quantification of shock damage in electronic assemblies [Lall 2006]. In this paper, Auto-regressive (AR), wavelet packet energy decomposition, and time-frequency (TFA) techniques have been investigated for system identification, condition monitoring, and fault detection and diagnosis in implantable biological electronic systems. One of the main advantages of the AR technique is that it is primarily a signal based technique. Reduced reliance on system analysis helps avoid errors which otherwise may render the process of fault detection and diagnosis quite complex and dependent on the skills of the analyst. Results of the present study show that the AR and TFA based health monitoring techniques are feasible for fault detection and damage-assessment in electronic units. Explicit finite element models have been developed and various kinds of failure modes have been simulated such as solder ball cracking, package falloff and solder ball failure.

scholarly journals A VARIANT OF THE EMD METHOD FOR MULTI-SCALE DATA

2009 ◽  
Vol 01 (04) ◽  
pp. 483-516 ◽  
Author(s):  
THOMAS Y. HOU ◽  
MIKE P. YAN ◽  
ZHAOHUA WU
Keyword(s):  
Empirical Mode Decomposition ◽  
Decomposition Method ◽  
Separation Property ◽  
Intrinsic Mode Functions ◽  
Scale Separation ◽  
Multi Scale ◽  
Mode Decomposition ◽  
Empirical Mode Decomposition Method ◽  
Emd Method ◽  
Scale Data

In this paper, we propose a variant of the Empirical Mode Decomposition method to decompose multiscale data into their intrinsic mode functions. Under the assumption that the multiscale data satisfy certain scale separation property, we show that the proposed method can extract the intrinsic mode functions accurately and uniquely.

Cointegration and the Empirical Mode Decomposition for the Analysis of Diagnostic Data

2013 ◽  
Vol 569-570 ◽  
pp. 884-891 ◽  
Author(s):  
Ifigeneia Antoniadou ◽  
Elizabeth J. Cross ◽  
Keith Worden
Keyword(s):  
Empirical Mode Decomposition ◽  
Time Scales ◽  
Energy Operator ◽  
Frequency Separation ◽  
Operational Conditions ◽  
Multi Scale ◽  
Mode Decomposition ◽  
Detection Approach ◽  
Empirical Mode Decomposition Method ◽  
The Hilbert Transform

The use of cointegration has been proposed recently as a potentially powerful means of removing confounding influences from structural health monitoring (SHM) data. On the other hand the Empirical Mode Decomposition method is a recent multi-scale decomposition technique with the ability to decompose a signal into meaningful signal components. In this paper the EMD method will be used to highlight the dominant time-scales that have been affected by varying environmental and operational conditions and the time-scales that are related to damage. Then cointegration will be used to remove the nonstationary effects not associated with damage at the time-scales of interest in the data. The final step of the damage detection approach proposed, will be the use of two different amplitude-frequency separation methods, the Hilbert Transform and the more recent Teager Kaiser energy operator approach in order to compare the merits of both, concerning the estimation of the instantaneous characteristics of the signals.

Ensemble Noise-Reconstructed Empirical Mode Decomposition for Mechanical Fault Detection

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Jing Yuan ◽  
Zhengjia He ◽  
Jun Ni ◽  
Adam John Brzezinski ◽  
Yanyang Zi
Keyword(s):  
Fault Detection ◽  
Empirical Mode Decomposition ◽  
Measured Signal ◽  
Accelerometer Data ◽  
Intrinsic Mode Functions ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Mixing Problem ◽  
Emd Method ◽  
Mode Mixing

Various faults inevitably occur in mechanical systems and may result in unexpected failures. Hence, fault detection is critical to reduce unscheduled downtime and costly breakdowns. Empirical mode decomposition (EMD) is an adaptive time-frequency domain signal processing method, potentially suitable for nonstationary and/or nonlinear processes. However, the EMD method suffers from several problems such as mode mixing, defined as intrinsic mode functions (IMFs) with incorrect scales. In this paper, an ensemble noise-reconstructed EMD method is proposed to ameliorate the mode mixing problem and denoise IMFs for enhancing fault signatures. The proposed method defines the IMF components as an ensemble mean of EMD trials, where each trial is obtained by sifting signals that have been reconstructed using the estimated noise present in the measured signal. Unlike traditional denoising methods, the noise inherent in the input data is reconstructed and used to reduce the background noise. Furthermore, the reconstructed noise helps to project different scales of the signal onto their corresponding IMFs, instrumental in alleviating the mode mixing problem. Two critical issues concerned in the method, i.e., the noise estimation strategy and the number of EMD trials required for denoising are discussed. Furthermore, a comprehensive noise-assisted EMD method is proposed, which includes the proposed method and ensemble EMD (EEMD). Numerical simulations and experimental case studies on accelerometer data collected from an industrial shaving process are used to demonstrate and validate the proposed method. Results show that the proposed method can both detect impending faults and isolate multiple faults. Hence, the proposed method can act as a promising tool for mechanical fault detection.

Sign in / Sign up

Export Citation Format

Share Document